We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,047 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
used
Veneer Vertical Slicer Manufactured by Angelo Cremona
used
Veneer Slicer, model TN 4000, manufactured by Angelo Cremona
used
I am selling the Colombo Angelo Figli AM33/AF window angle system. Year of construction 2005. Pin side saw + 620mm spindle fully servomotor. Roll forming side 3 spindle + strip cutting unit fully servomotor. Milling heads VYDONA WOOD EU78-92, wood-aluminum 92 everything programmed into the machine and included / possible to bill if not accepted. Combined power 50KW Weight 6000kg. Compact size, cheap also for small workshops. Available right in stock. Condition very good. Complete system with tools / possible to bill if not accepted. Please contact us for more photos and info.
used
Complete Veneer Peeling Line Working Length: 3300 mm
used
SVOLGITOR TO BARRA "DE ANGELI" FOR BOBINE SILURO CORDATRICE 4 PLACES "DE ANGELI" FOR BOBINE : 1 000 GIRI 200 N/1' VOLANO OF TIRO - 1500 COUNTERMETERS "DE ANGELI"
used
Angelantoni / ACS Climate Chamber Here we offer you an Angelantoni / ACS climate chamber. Angelantoni / ACS climate chamber with humid air-cooled Test ram volume 567 liters External dimensions: width 1100 mm x depth 1705 mm x height 1910 mm Internal dimensions: width 850 mm x depth 746 mm x height 895 mm Characteristic values for temperature tests Temperature range -40°C to +180°C Maximum temperature change rate from -40°C to +180°C 3.2 K/min Maximum temperature change rate from +180°C to -40°C 2.5 K/min Heat compensation at -25°C. 1000 W Characteristic values for climate tests Temperature range: + 10°C to +95°C Humidity range: 10 % to 98 % RH Accuracy 0.25÷0.3 Rated voltage: 400 +6/-10% 50Hz 3+N+T Rated power: 11 kW Rated current: 20 A Fuse on site: 12.1 A sluggish Refrigerant: R404 A Weight: approx. 820 kg Type: CH600 For you as a buyer for security ...
used
COMPONENTS OF EACH PLANT: "TECHNOFIL/DE ANGELI" MOD. T 15/25 COMPLETE OF VASCA FOR EMULSIONE RECOTTURA FORNO "TECHNOFIL/DE ANGELI" "TECHNOFIL" FOR BOBINE - 400 SYSTEM OF TRASTIOF FUSTITORS To 8 PLACES FOR T 15/25
used
CAVALLETTO SVOLGITOR TO BARRA WITH FRENO D. 1500 MM TUBOLARE CORDAR To SILURO "DE ANGELI" MOD. CS 12 to 12 CULLE - BOBINE 560 MM GIRI 500N/1' COUNTERMETERS VOLANO OF TIRO - 1500 "DE ANGELI" 2000
used
ACS Angelantoni Climatic Chamber Here we offer an ACS climatic chamber. ACS Angelantoni climatic chamber water-cooled Capacity: 500 litres External dimensions: width 1230 mm x height 2350 mm x depth 2600 mm Interior dimensions: width 815 mm x height 910 mm x depth 800 mm Temperature range: -70°C to +100°C Humidity range 20% to 95% relative humidity Connection: 400 V / 3 +N+T 50 Hz Energy requirement: max. 20 kW (new vacuum pump installed) Weight: 2000 kg Refrigerant: R404a/R23 Type: ACS UD 500 C Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.
used
REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.
used
Manufacturer: Rollgang angetrieben für Lackstrasse, Working length mm: 950, Working widht mm: 1300, Total hight mm: +/- 980, Frequency converter: yes, Total hight mm: +/- 980, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-25, Working hight adjustable mm: yes, Manufacturer: Rollgang angetrieben für Lackstrasse, Working widht mm: 1300, Total hight mm: +/- 980, Roller pitch mm: 150, roller diameter: 45, Feeding speed min-max m/min: 10-25, Working widht mm: 1300,
used
Angelini DG 13 Manufacturer: AVM Angelini Model: Torino CNC Type: DG 13 Year of construction: 06/2002 Spindle speed: 3000 rpm Control: Fanuc Digital 21i Chuck Diameter: KNCS-N-260-72 Jaw Quick Change Power Chuck Rod Passage: 67mm Head: 12-speed, VDI40 Duplomatic Equipment: controlled quill Other: The machine is under power and can be viewed by appointment
used
Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm
used
VALIABLE SVOLGITOR TO BARRA FOR BOBINE - 1500 ROTANTE CORDATRICE 3 BOBINE - 1200 GIRI 25 N/1' COUNTERMETERS NASTRATRICE PORTASTAMP TESTA VOLANO OF TIRO - 2000 "DE ANGELI"
used
Straightening ruler, straightening rail -Angle: 32° -Dimensions: 3000/50/H8 mm -Weight: 8.4 kg
used
General SKU331U668 LocationBarneveld MakeAngelo Pilotta TypeRG No.1325 Year of construction1995 Pressure Working pressure5 Bar Vacuum possiblecheck Working pressure jacket12 Bar Main Features MaterialStainless steel Volume3200 Ltr. Motor8.8 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity3200Ltr. (bruto 4100) Vessel sizesDia. 1460x2680 mm Dished bottomcheck Dished top sidecheck Manholecheck 280x390mm Top connectionscheck DN100,DN65, DN50(3x), 1/2(2x) OutletcheckDN50(2x) With jacketcheck 250Ltr+70Ltr. Max. temperature190°C With turbo stirrerCurved blade disc turbine Motorcheck 6/8.8kW, 400Volt, 980/1475rpm Speed mixing shaft100/150rpm Stainless Steel Reactors MaterialStainless steel 1.4401 (316) Information Total height3,6m Weight1450 kg Floorspace1.,8x1,8mMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid ph ...
used
General SKU331U669 LocationBarneveld MakeAngelo Pilotta TypeRG No.1326 Year of construction1995 Pressure Working pressure5 Bar Vacuum possiblecheck Working pressure jacket12 Bar Main Features MaterialStainless steel Volume3200 Ltr. Motor8.8 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4401 (316) Stainless Steel Reactors Reactorcheck Capacity3200Ltr. (bruto 4100) Vessel sizes1450x2680 mm Dished bottomcheck Dished top sidecheck Manholecheck 280x390mm Top connectionscheck DN100,DN65, DN50(3x), 1/2(2x) OutletcheckDN50(2x) With jacketcheck 250Ltr+70Ltr. Max. temperature190°C With turbo stirrerCurved blade disc turbine Motorcheck 6/8.8kW, 400Volt, 980/1475rpm Speed mixing shaft100/150rpm Information Floorspace1.,8x1,8m Total height3,6m Weight1450 kgMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmac ...
used
Manufacturer Angelantoni ACS Model DY 110 Operating condition Used (as good as new) Year of construction2021 Value added tax Deductible DescriptionClimate test chamber ACS DY110 - Year of construction 2021 - Acquisition January 2022 - approx. 500 operating hours - Sale due to completion of product development / testing Technical data: - Test chamber dimensions: 548 x 447 x 447 mm - Test chamber volume: 110 litres - Working range temperature tests: -40 to +180°C - Working range of climate tests: +10 to +95 °C and 10 to 95 % relative humidity - Rated power 3 kW, connection to 1/N/PE AC 230V 50Hz via CEE Qualifications: - 2006/42/CE Machinery Directive - 2014/35/UE Low Voltage Directive - 2014/30/UE Electromagnetic Compatibility Directive - IEC 61439-1/2 Low-voltage switchgear and controlgear assemblies - IEC-60204-1 Safety of machinery - Electrical equipment ...
used
Key data: 165 mm, 60 U/min
Machine Type: Lead and Tension Screw Lathe Manufacturer: AVM / Angelini Model: MAS 165 x 800 Year of construction: 1980 Condition: very good Offer Type: Used Machine Specifications: Center height: 165 mm Center width: 800 mm Spindle bore: 32 mm Speed range: 60 – 1600 rpm. Propulsion: 1.1 kW Remark: Röhm 3-jaw chuck Ø 160 mm with interchangeable jaws, Röhm 4-jaw chuck Ø 160 mm with interchangeable jaws, Quick-change steel bracket System Multifix size A with 2 inserts, coolant device, rotating bezel, fixed bezel, rotating grain tip, Chuck drive flange, interchangeable wheels, Operating instructions Weight: 450 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
Overview This canning machine CB50F from American Manufacturer, Pneumatic Scale Angelus was built in 2020. It has been well maintained with regular servicing and is in immaculate condition. It has been recently upgraded with Teflon hoses to the fill heads. Tech. Details Capacity - 3000 cans per hour. Can formats 330ml 440ml 500ml 560ml Can end spec - 202 CDL Dimensions (Floor) - 3121mm x 946mm Added bonus of UK and Europe wide engineering support (cost at buyer expense)
used
Rotary Lathe with Staylog Bar and Longitudinal Cutting System
used
Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System
used
Different length 4000 - 4600 -5200 mm Head Clipper 1200 mm
used
Working Length: 4000 mm
used
turning diameter: 320 mm turning length: 400 mm control: FANUC 21i-T swing diameter over face slide: 165 mm number of spindle speeds: 50-4500 weight of the machine ca.: 3 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0i-TC Main spindle nose: ASA 6 Main spindle self-centering diameter: 250mm Main spindle bar passage: 65mm Turning diameter: 280mm Turning length: 550mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 30 X axis travel first turret: 245mm Z axis stroke first turret: 600mm Rapid advances linear axes X Y Z: 36m/min Tailstock: yes Barrel stroke: 190mm Chip evacuator: carpet Number of motorized tool holders supplied: 2 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3415mm Width: 1786mm Height: 1780mm Weight: 3900Kg
used
Climatic test chamber ACS DY110 - Year of construction 2021 - Acquisition January 2022 - approx. 500 operating hours - Sale due to completion of product development / testing Specifications: - Dimensions test room: 548 x 447 x 447 mm - Test chamber volume: 110 l - Working range temperature tests: -40 to +180°C - Working range climate tests: +10 to +95 °C and 10 to 95 % relative humidity - Nominal power 3 kW, connection to 1/N/PE AC 230V 50Hz via CEE Qualifications: - 2006/42/CE Machinery Directive - 2014/35/UE Low Voltage Directive - 2014/30/EU Electromagnetic Compatibility Directive - IEC 61439-1/2 Low Voltage Switchgear Assemblies - IEC-60204-1 Safety of machinery - Electrical equipment of machinery - IEC 61000-5-2 Installation and Interference Suppression Guidelines - Section 2: Grounding and Wiring - IEC 61000-6-2 Generic Standards - Immunity Standard for Indu ...
used
We bought used machine in 2018, we did small repairs. It was regularly maintained . Machine is in perfect working condition.
used
Main spindle opening: 30mm, clamping chuck: DIN 177E, number of tool slots: 12, controls: GE Fanuc Series 0-T, with Bar Loader IEMCA.
used
Center height:165 mm Center width: 750 mm Spindle bore: 38 mm Bed width: 195 mm Speeds: (16) 35 - 2480 min-1 Motor power: 2.5 / 2.0 kW Tailstock mount: MK3 Quill stroke: 100 mm Dimensions, approx.: 1650 x 540 x 1450 mm Equipment: - 3-jaw lathe chuck - Emergency stop impact button - Quick release holder System Multifix - Bed stop - Reducing sleeve MK3, MK5 - Splash guard back panel - Interchangeable gears - Jaw chuck protection with limit switch - Coolant device - Operating tool - Service incl. oil change
used
4 Spindle High Speed Train Milling Machine, Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300,- 4-axis +/- 180 degrees 4 High Frequency Spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip Conveyor, ATC, Recooling Unit, Renishaw External Measuring System Power consumption 41 kw
used
4 Spindle High Speed Train Milling Machine, Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300,- 4-axis +/- 180 degrees 4 High Frequency Spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip Conveyor, ATC, Recooling Unit, Renishaw External Measuring System Power consumption 41 kw
used
Steam oven, built in 2006, in good condition, fully functional against bid from 76131 Karlsruhe
used
Description: Serial number 221, with 8 sanding units Approx. Onsite Dimension. (l x w x h): 10,000 x 2,000 x 4,000 mm, weight approx.: 3,000 kg
used
Cast Angle PlatesDimensions 1460 x 500 x 650 mmwith 9 horizontal T-slots 38/22 mmused: EUR 1.450, ------Cast Angle PlatesDimensions 1200 x 1000 x 600 mmwith vertical longitudinal slotsused: EUR 1.500, ------Cast Angle PlatesDimensions 1500 x 1600 x 1000 mmwith vertical slotsused: EUR 2.000, ------Cast Angle PlatesDimensions 1200 x 1000 x 600 mmused: EUR 1.400, ------T-slot worktableDimensions 1400 x 1400 x 720 mmwith 8 T-slots 48/28 mmused: EUR 2.400, -Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Variety of H-Beam, I-beam, Equal and Unequal Angle, Flat Bar (different sizes) Variety of H-Beam, I-beam, Equal and Unequal Angle, Flat Bar H-Beam Size : 300 mm x 300 mm, 350 mm x 350 mm, 400 mm x 400 mm I-Beam Size : 450 mm x 400 mm, 800 mm x 300 mm, 1000 mm x 300 mm Equal Angle size - 65 mm x 65 mm Unequal angle size -350 mm x 100 mm Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award
used
Gear, angular gear, Stinrad gear, angular gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine -Type: W 88 -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm -Weight: 7.2 kg
used
We offer you here a used L-Angle for purchase. Included in delivery are: 01x L-Angle, used Material color: orange Surface: lacquered Profile: L-Profile Profile: 100 x 50 x 2.5 mm Total length: approx. 1,200 mm Hole spacing: 50 x 50 mm (hole center to hole center) Weight / pcs approx. 3,893 Kg In the L-angle are 16 holes with a diameter of about 10 mm available. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 ...
used
Angle head, milling head, drill head COLLET & ENGELHARD BFf 100/110 nu Tool holder: SK50 360 ° rotatable Flange: Ø 340 / 450 mm bolt circle diameter: Ø 390 mm 4x bore: Ø 25,5 mm Intermediate flange ( angle head side ): Ø 350 / 575 mm bolt circle diameter: Ø 390 mm 4x threaded hole: M24 x 2.5 intermediate flange (machine side): Ø 550 / 640 / 670 mm bolt circle diameter: Ø 610 mm 6x bore: Ø 16.5 mm, with countersunk hole Ø 25 mm, depth: 15 mm used, tested ! Dimensions ( angle head ): 670 x 450 x 450 mm Dimensions ( intermediate flange ): 200 x Ø 670 mm Dimensions ( transport box ): 1050 x 850 x 1070 mm
used
Coming for sale: several used clamping angles/boring mill angles 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5.8t Load capacity 60t 6 pieces available tlw with staircase In addition, there are several smaller angles for sale: Clamping angle 1020 x 1025mm No. 81 Clamping angle 805 x 1000mm No. 85 Clamping angle 1660 x 1620mm No. 82 various box angles
used
Angle gripper, 2-finger angle gripper SCHUNK PWG+64-KVZ 311625 Opening angle: -3 ° - +15 ° Closing force: 1007 N 2.0 - 6.0 bar used, tested ! Dimensions: 67 x 36 x 66 mm Dimensions ( packaging ): 92 x 78 x 50 mm
used
Pneumatic angle grinder, angle grinder ATLAS COPCO LSV38 ST12-125/B 8423 0131 11 speed: 12000 rpm disc diameter: Ø 125 mm spindle thread: M14 operating pressure: 6.3 bar used, tested ! Dimensions (angle grinder only): 280 x 180 x 120 mm
used
Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1338 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) Features: Construction year: 2017 scope of delivery: including supports and side guides angle: 30° KW: 0,75/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Antrieb: SEW Getriebemotor Optional erhältlich: Frequenzumrichter Conveying length in mm (NL): 1615 Frame width in mm (NB): 1150 Belt width in mm (GuB): 1050 Bauhöhe in mm (BH): 150 For individual, expert advice, simply get in touch with us. Simply contact u ...
used
Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1337 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) Features: Construction year: 2017 scope of delivery: including supports and side guides angle: 30° KW: 0,75/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Antrieb: SEW Getriebemotor Optional erhältlich: Frequenzumrichter Conveying length in mm (NL): 1615 Frame width in mm (NB): 1150 Belt width in mm (GuB): 1050 Bauhöhe in mm (BH): 150 For individual, expert advice, simply get in touch with us. Simply contact u ...
used
pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -Max. Discs: Ø 178 mm -Speed: max. 8500 rpm -Number: 74x angle grinder available -Price: per piece -Weight: 4 kg/piece
used
Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 2x clamping angle available -Price per piece -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.
used
Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Groove width: 22 mm -Dimensions: see photo techn. drawing -Number: 2x clamping angle available -Price per piece -Dimensions: 235/100/H500 mm -Weight: 8.9 kg/pc.
used
Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg
used
Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA08 -Shaft: Ø 32 x 80 mm -Measurements: see photos -Number: 10x angular gear available -Price per piece -Dimensions: 390/160 / H165 mm -Weight: 11.1 kg / pc.
used
Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA07 -Shaft: Ø 25 x 75 mm -Measurements: see photos -Quantity: 4x angular gear available -Price per piece -Dimensions: 335/130 / H120 mm -Weight: 5.6 kg / pc.