We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,436 used machines on RESALE, but how to find them? Machine Search
used
Vibration tester for Electronic devices. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stock# U2308-10 Used stainless steel (316) vertical basket centrifuge by Ametek/Tolhurst Centrifugals (USA) type Batch-Master model B-M with perforated bowl size 48" (1219,2 mm) diameter x 30" (762 mm) height. Machine is designed for periodical work with automated discharge of cake. Working rotation of bowl from 0 up to 1080 rpm. Top feeding, bottom discharge. Machine is mounted on carbon steel supporting frame. Bowl is driven by hydraulic device with power 30 kW, 1470 rpm, 380 V, 50 hz, design Ex. Included control panel and stainless steel conical chute.
used
diameter: / mm length: / mm tool adaptor: / The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Adsorption system (absorbing plant, absorption system) used for air purification, activated carbon filter and solvent recovery Air filter, odour filter AMEG Type: DAP 4 exSo "Optima" Dimensions approx.: 3400 x 1400 x 2700 mm Control cabinet: 800 x 600 x 1900 mm The plant cleans air from vapours of organic solvents by adsorption mittles activated carbon filter. A more detailed description of the process can be found in the pictures.
used
Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, quick change head -Quick-change steel holder: quick-change head size. B with base plate -Division: 40-fold -Dimensions: 190/140/H150 mm -Total weight: 9.4 kg
used
Jungheinrich pallet stackers HC 10 Nominal load capacity 1000 kg Year of construction 2000
used
Automatic labeling bench for glass jars AMETIS Year 2018 2 labeling stations: installation of a cover label with tamper-evident tab + installation of a body label Rate: approximately 12 jars / min with lid label with tab; about 50 pots/min with body label Bench composed of: A turntable; to ensure the storage and distribution of pots (diameter 1200mm) with edge on the tower and deflector for guiding the pots on the conveyor AG204 labeler; for placing the label on the lid of the pots (width between 10 and 110mm, length 5 to 600mm), dispensing speed 500mm/sec, detection of pots by photoelectric cell with reflector Pneumatic reel; for folding the tab of the label placed on the lid of the jars. flap on the body of the pots Static wrapping machine; for rotating pots with folded tab detection AG204 labeler; for attaching the label to the body of the pots Dynamic wrapper; to rotate the ...
used
Used Complete Line for Oil Ameduni 2000 4 ton per hour We are excited to offer a comprehensive used production line for the Ameduni 2000 method of oil production This complete line comprises various pieces of equipment such as a washing machine defoliator crusher modular kneader group knead with pump decanter and separator All the equipment is designed to streamline the production process and improve efficiency ensuring high quality oil production This production line is an ideal fit for small to medium sized oil production operations Moreover all the equipment is in excellent working condition and has been regularly maintained to ensure its functionality If you are looking for a reliable production line for oil production this Ameduni 2000 line is a perfect choice Please feel free to contact us for more information and pricing details Our team is always available to answer your queries ...
used
General SKU361S877 LocationBarneveld MakeAmersham Pharmacia Biotech (SE) TypeBps 1138 Year of construction1999 Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel Information Floor space1,0x1,4 M CEcheck Total height2,0 M Weight450 KgMiscellaneousAmersham Pharmacia BiotechMiscellaneous > MiscellaneousBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Ametek APOLLO X Analytical instrument System Components The system is comprised of: o A 10 mm2 or 30 mm2 detecting unit assembly. o A DPP3 PCB fitted inside the PC workstation (or EDAM analyzer) that amplifies, digitizes and processes the detector signal. o A support box to provide power and the ThermoElectric Cooler (TEC) controls to the detector. o A signal cable is used to connect the detector assembly to the DPP3 PCB. o A detector power / TEC1 control cable is used to connect the support box to the detector. o A TEC2 control cable is used to connect the support box to the detector. o A PC Workstation with Genesis software version 6.03 or greater Space requirements Apex2 configuration Workstation dimensions: 17.7 x 6.7 x 18.0 in (44.9 x 17.0 x 45.7 cm) Workstation weight: 33.0 lb. (14.97 kg) Detector Support box: 7 1/8 x 10 1/4 x 3 3/8 in (18.1 x 26.0 x 7.6 cm) D ...
used
Tensile and compression tester Manufacturer: Ametek Lloyd Type LRX Plus Serial No. 108476 Year of construction 2011 Measuring range 0.2 N – 5 kN (when using interchangeable measuring cells) Weight 50 kg Maximum load 5 kN (1100 lb) (tensile and compression test) Force measurement accuracy - better than 0.5%
used
Hereby 2 a material stand are offered for sale. The price is per piece. The item is in a used condition but works perfectly. specifications: - Load capacity: 150kg - Platform width: 150mm - Platform depth: 410mm - Height: 520 - 800mm - Tilt capability: 15° , 30° -Roll material: thermoplastic elastomer (TPE)
used
- Synchroblock - Drive cardan shaft between the two machines - Different bottle formats - Machines in good condition
used
Type (HC 110 / WP10M (1000 KG))
used
GE/Amersham Äkta Pilot prep. FPLC; Software Unicorn 5.2, further information on request
used
used
Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end
used
Electric debar barlift truck Manufacturer Jungheinrich Germany Type: AMEISE EJC 12.5 115 400 T Drive: 24 VOLT DC ( 2 x 12 volt batteries) 1 Wheel drive steering via drawbar Load capacity: 1.25 to at load center of gravity 600 mm Bevfzmxsnl Stroke: electro-hydraulics Lifting height: max 410 cm Fork length: 82 cm Mast retracted: 250 cm Total length: approx. 160 cm width approx. 84 cm Features: Charger + 2 normal used 12 volt batteries Can be used in the warehouse
new
- Ametek Blower - HP Part Number CT345-45320 - for HP Indigo Series 3 Machines
used
Sell very long hand pallet truck / lifting forks 2500540mm Q max450kg
used
Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1440 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 310/200/H250 mm -Weight: 21.8 kg
used
Jungheinrich Ant Load capacity 1500 kg Lifting height 3500 mm At call
used
- X: 1050 mm - Y: 600 mm - Z: 600 mm - Table size: 1150 x 600 mm - Speed range: 8,000 rpm - Spindle holder: BT 40 - IKZ: 20 bar - WZ changer: 24-fold - Control: Fanuc 0i-MD - Switch-on hours: 31575 h - Program run: 8510 h - Total power: 40 kW - Machine weight: 7,200 kg - Space requirements (W x D x H): 4.0 x 2.2 x 2.7 m - Condition: very good Details Filter system with cooler AME HSP 350, paper belt filter, coolant reservoir 2270 l; chip conveyor AME SB 200, without the vices shown Accessories Measuring probe, documentation, 1 piece holder, extraction
used
WH 105 CNC with Heidenhain iTNC 530 control system is in good technical condition. By agreement, it is possible to see it in operation. AME brand belt filter system with PS50 belt filter attachment, belt skimmer with conveyor belt, micro aerator type 300, lifting system, pump for feeding the machine, external cooling 3 bar, 40 l/min and internal cooling 20 bar with container for coolant 1000 l. Standard chip conveyor for x 1800mm with stepped grate from AME. Spindle speed: max 3300 rpm Transverse movement of the table - x-axis: 1800 mm Longitudinal movement of the table - z axis: 1250 mm Vertical table movement - y axis: 1600 mm Turntable: : 1400x1600 mm B: 360°
new
Feeder opening: 760mm x 570mm; Funnel Contents: Throughput : Material and screen dependent; Rotor diameter: 240 mm ; Rotor length: 350 mm; Blades: 12 knives on the rotor + 2x knives on the side; Knife size: 30mm x 30mm; sieve blockage: 25mm; hydraulic moving floor: Yes; Suction nozzle: 160mm; Power consumption: 6 kW; Noise level: 90 dB (A); Dimensions: 1,250 mm x 900 mm x 1450mm (L x W x H); Weight: 600 kg; Engine kW 5.5 IE2 (High Efficiency); Hydraulic power kW 0.5; Total installed power kW 6. Dimensions: H 1.450 mm x 1.250 mm x 900 mm. Kg 600. loading opening: 760 mm x 570 mm; rotor: à ̃ 240 mm x 350 mm; working width: 350 mm. N 12x knives (central) + 2x knives (side); knife 30 mm x 30 mm with hollow side, screwed with conical screw for better fastening; N 1x grid supplied, sieve to choose between à ̃ 12mm and à ̃ 25 mm. With ABB inverter to control worker mo ...
Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request
used
Technical data: Make: Moehringer Length: 1900 mm Width: 60 mm - Good condition - Used to transport parquet friezes - Tipping stool and adjustable stem holder Pictures and further information on request
1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...
used
Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...
new
Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herd ...
Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation
used
Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request
used
technical data: Roller length/width: 745 mm / 5500 mm Roll Dimensions: 600x .113 Roll spacing: different Free-standing
technical data: Roller speed length/width: 4.10 m Roll Dimensions: 550 x 140 Roll spacing: different
used
technical data: Funding length: 2 m Axle distance: 1.8 m Bandwidth: 1500 mm
technical data: Purpose: for boards Dimensions: 700 mm wide Note: as good as new Warehouse: Wiesentheid
used
DESKTOP METAL STUDIO SYSTEM 2 3D printer (year 2018) Ideal printer for printing high-performance metal parts in the office. Desktop Metal’s Studio System 2 Metal 3D Printer extrudes a metal filament (in the form of rods) to create the desired geometry. You don’t need a removal step for the plastic binder that holds metal dust in a filament (or associated equipment) when printing with 316L stainless steel. Impressions from the Studio system are transferred directly to the accompanying furnace, which first heats the parts to remove all binders from the parts, then increases the temperature to nearly melt for sintering. This printer is working and live demo can be done. Work hours: Printer: 164 jobs x 10h = 1640h Debinder: 46 jobs x 18h = 828h Furnance: 21jobs x 48h = 1008h Includes software and transformer to convert the American frequency into European.
technical data: Type: not driven Make: Möhringer Rolls Number: 3 pieces Warehouse: Wiesentheid
technical data: Make: Möhringer Power: 5 kW
technical data: Machines No.: 0115 Drawing No.: 170 317 00
technical data: Rank: 10 90 curved Transport by roller link chain and steel chain wheels Drive without motor
used
Hello I will sell a powerful chipper of the American brand Rotochopper model MC-166 Engine from a reputable company CAT 3406 - 360 HP. The chipper, despite its age and appearance, is fully functional. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. The same applies to the operation, which is highly intuitive. Drum-knife chipper for very diverse needs: - Wood, whole logs. - Various types of wood waste - tree trunks, stumps -Cuts - Pallets (It has a magnetic roller that captures metal) - blocks, waste - and many others Capacity approx. 90 m3/h depending on material, operator efficiency, type of material and screens. It has a mounted magnetic wheel that will allow you to get rid of metal parts from the material. It is possible to install different sizes of sieves depending on the needs. The wide hopper ...
Machines No.: 0052 QFL 0053 Insertion Drawing No.: 146 001 75 1 cross conveyor light with insertion: Power: 0.37 kW Axle distance: 2.06 m Rank: 3 Transport by 3/4" chain and stanhl chain wheels Drive by special gear motor Substructure and bearing housing in steel construction
used
technical data: Strand spacing: 700x700x1200x1500 Rank: 5 Axle distance approx.:5500 mm Make: Unknown
Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Pos.2 Gantry stacking system Pos.3 Parcel roller conveyors in the area of gantry systems Pos.4 Security technology Pos.5 Machine control Pos.6 Intermediate strip automatic The mechanization is designed for the following workpiece dimensions: Length: 320 - 1000 mm Width: 56 - 120 mm Thickness: 20 - 40 mm Stack Dimensions: Length: 400 - 1000 mm (double lengths up to 2 x 520mm) Width up to: 1200 mm Height up to: 1200 mm Stacking is carried out on Euro pallets Max. output: max 40 parts/min or max 4 layers/min (board or batten layer!) Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Quantity: 4 pieces Length: 2600 mm each Usable width: 800 mm each Propulsion: Spur gear motor Conveying speed: 15 m/min Incl. side guide rulers and layer alignment (One layer is formed, ...
new
Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate clear title to the ...
used
Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...
used
- 1.2 m wide - approx. 2.75 m long - from 0.5 to 1.1 m upward
Technical data: intended purpose: Planks Achsabstand: 2 m rope number: 4 pieces impulse achievement: 4 kW chain division: 125 mms lax strength: 40 x 10 mms