Sheet thickness: 0,00 mm Bar diameter: 0 mm Punching size: 0 mm (1) hydraulic / (2) mechanical: 1   MACH-id   5017 MAKE       Amada Promecam TYPE        ARIES 222 YOP          1991 SPECIFICATIONS Controll       AMADAN -03P Capacity Ø x plate thickness         88,9 x 4,5 mm mm Cutting lenght          1200 mm Throat    600 mm Press force     20 Ton Table size Length x Width        1200 x 600 mm Working speed        20 M/Min Power        &nb ...

Amada Promecam GPS 3100 x 12 mm CNC Cuttinglength: 3100 mm Max sheetthickness st 45: 12 mm Backgauge: CNC Electric motor (power): 15 kW Length: 3600 mm Depht: 1820 mm Height: 2120 mm Weight: 10 ton number of sheetholders: 16x  ...

• more information

plate high hold system CNC controlled backgague manual knife play adjustment manual cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3560 mm Depth: 1990 mm Height: 1955 mm Weight: 6,3 ton High hold system: yes Number of sheet holders: 16x

Max. thickness Steel: 12 mm; Stainless steel cutting thickness: 8 mm; Cutting thickness Aluminum: 10 mm; Programmable backgauge stroke: 1000 mm. 1 square ruler, length 1200 mm ...

• more information

Hydraulic guillotine - AMADA type GPX 630. Cutting length: 3100 mm x 6 mm, full CNC control. Variable angle of the knife and the gap between the knives, set by the computer after feeding the gr. and length of material. Sheet metal cutting in the range of 0.4 - 6 mm. CNC bumper departure 10 -1050 mm, retraction, programs. Machine with automatic support for long sheets of cut sheet metal at the back. Raised rear bumper. Machine weight 6.5 t. 2 supports and an angle bar at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, the main motor only - 5.5 kW. Full original DTR in English and Polish, OHS manual in Polish. The machin ...

Hydraulic guillotine - AMADA type GPN 630. Cutting length: 3100 mm x 6 mm, Variable knife angle and knife gap. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Offer 24162 Specifications: - max. working width 3050 mm - max. cutting capacity - at 400 N/m² strength 6 mm - at 700 N/m² strength 4 mm - Adjustable cutting angle - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Back gauge with positioning control AMADA 10 - 1000 mm - Front angle stop + support arm - Stroke rate 12 - 32 per/min - Drive 400 V / 12 kW - Table height approx. 800 mm - Space requirements incl. back gauge, without front support arms -ca. W 3800 x H 1950 x D 3200 mm - Transport width approx. 2200 mm - Weight approx. 6000 kg - With: - E - foot switch - Sheet metal holding -M ...

sheet width: 3050 mm plate thickness: 6,35 mm thickness at Niro-steel: 4,0 mm down holder: 16 Stück table length: 575 mm Control: AMADA cutting angle: 40° - 2°20 ° 0: 305 bar oil volume: 100 ltr. total power requirement: 5,5 kW weight of the machine ca.: 6150 kg range L-W-H: 3790 x 2090 x 1860 mm maintained condition () Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind t ...

Capacity: 100 t Folding length: 3100 mm CNC Brand: Amada CNC Model: Operateur Max. bending length:        3.100mm Distance between column:    2.700mm Max. pressing force:        100T Dis. Beam – Table:          450mm Beam stroke:                180mm Approch speed:              8mm Working speed:              100mm Return speed:               80mm Adjustment X-Axis back gauge:750mm Number of controlled axis:  4 Control:          ...

Capacity: 220 t Folding length: 4200 mm CNC Brand: _Unknown / Other CNC Model: Operator AMADA - HFBO 220-4 CNC Pressbrake 4200 x 220 Ton MACH - ID 6330 Make: AMADA Type: HFBO 220-4 Control: Operateur YOP: 1994 Max. bending length    4.200 mm Distance between column     3.760 mm Max. pressing force     220 T Dis. Beam – Table       450 mm Beam stroke        180 mm Troth beam          410 mm Approch speed       100 mm Working speed        7,5 mm Return speed           ...