amada 100 3 used for sale

Description: Serial Number: 097 Working details: , Working Area: , X: 3070 , Y: 1550 mm , Axis displacement ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , X: 3420 , Y: 1550 , Z: 200 Cutting speed: X,Y: from 0 to 20 mt/min , Max. weight on the table: 840 kg , Assist gas control: Automatic , Max. working height: 840 mm , Weight of machine: Approx. 12.000 kg (excl. dust collector, cooler and changeoderver) , Power requirement: AC 200/220V ±10% 50/60Hz 27 Kva (excl. dust collector, cooler and pallet changer) , Laser  , Model: AF 4000 i-B Maximum Power 4,000w Frequency: 5 to 2000hz Laser Type: Co2 Circular Polarisation , Laser gas consumption Approx. 10 lit./min. Cooling water flow 160 lit./min. Power requirement AC 200/220V ± ...

Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt ; Without grinding belt fuehrung

8 axes: Y1 / Y2 / X1 / X2nbsp; / R1 / R2 / Z1 / Z2 Capacity: 100 Ton x 3100 mm Backgauge: CNC Control: Operateur 2 - 8 axes Passage between uprights: 2700 mm Max stroke: 200 mm Max distance between table -- ram: 470 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 92 mm/sec Electric motor (power): 7,5 kW Length: 3680 mm Depth: 1630 mm Height: 2635 mm Weight: 6750 kg

- Updated CNC ? Task 84 Titano plus, year 2016 - Pneumatic tie downs - Open Height: 0 mm - Hole: 0 mm - Backgauge movement: 0 mm - Table width L -R: 0 mm - Inclination of beam: 0 mm - Operating hours: 0 - Type: 0 - Pressure force: 100 t - Bending length: 3.100 mm - Axes: 7 - Working area: 0 mm - Distance between uprights: 0 mm - Returning speed: 0 mm/seg - Frame type: 0 - Working speed: 0 mm/seg - Locking speed: 0 mm/seg - Throat: 0 mm - Control: CNC TASJ 84 Titano plus 2016 - Stroke max: 0 mm - Oil tank capacity: 0 l - Power: installed max: 0 kW - Weight: 6.750 kg - Dimensions (long x wide x high): 3.750 ? 1.960 ? 2.650 mm

- 2 robots, loader and folder - PROMECAM tooling - Software BENDING SYSTEM 32 - Pressure force: 100 t - Bending length: 3.000 mm - Axes: 8 - Power: installed max: 7,5 + 21 (Robot) kW - Dimensions (long x wide x high): 11.500 x 4.650 x 3.200 mm - Weight: 6.500 kg

Control Amada Pressing force ... 100t Bending length... 3000mm controlled axes ... 7 Drive... Hydraulic The machine is in good condition, possible to test under power.

Pressbrake / Press brake AMADA HFE M2 1003 Bending length 3100mm Pressure / Druk 100 ton CNC 4 axis / CNC 4 axes Year of manuf. / Year of construction 2012.10 Condition / Condition: very good, ready for operation / very good, ready for immediate use Bending tools not included / without bending tools

offer 22499 Specifications: -.max. Working length 3100 mm - Stand passage 2600 mm -.max. Pressing force 100 t - Projection 400 mm - stroke 100 mm -.max. Installation height 370 mm - Table height approx. 960 mm - Delivery speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 11 kW - Space requirement approx. W 3500 x H 2300 x D 1950 mm - Weight approx. 8.0 t - with: - 3 axis CNC control CYBELEC - - CNC – Backgauge 0 - 600 mm - split sharpening tool - split V matrices - Support arms

1993 Amada Promecam ITS2 - 100/30

Capacity 100 tons Bending lenght 3100 mm Number of axes 6

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

year of issue: 2009 Bending stick length: 3100 mm press force: 100 to

AMADA ASTRO 100NT cnc/nc press brake Year 2006 100T

Hydraulic press brake. Nominal forming force: 100t. Working table length: 3000mm. No tools.

Capacity 3100 x 100 tons Year of construction 2012 (commissioned 01-2014) Akas Fiessler laser safe Y1, Y2, X, R, Z1 and Z2 axis CNC controlled Amada Quick clamp Includes toolset

THE AMADA SCHIAVI FLEXA 100/30 FOLDER HAS THE FOLLOWING FEATURES: • YEAR OF MANUFACTURE: 2006 • FOLDER POWER: 10 KW • WEIGHT OF THE FOLDER: 6500 KG. • NUMBER OF AXLES: 8 • TONS (STRENGTH): 100 TN • FOLDING LENGTH: 3 M. • DIMENSIONS: 11463X4633 MM THE FOLLOWING TOOLS ARE INCLUDED IN THE PRICE: PROMECAN TYPE PUNCHES (1193, 30º, R=0.6, H=104) 100 TN/M -2PCSX835MM -1PCX415MM -1 SEGMENTED SET (2 UNITX100MM, 1 UNITX270 MM, 1 UNITX10 MM, 1 UNITX15 MM, 1 UNIT X 20 MM, 1 UNIT ) PROMECAN TYPE MATRIX (MULTI V) 100 TN/M -3 UNITS THE FOLDER IS IN OPERATION, WITH ITS MAINTENANCE UP TO DATE. THE PRICE INCLUDES THE LOADING OF THE MACHINE ON A TRUCK. TRANSPORTATION, UNLOADING AND COMMISSIONING NOT INCLUDED IN THE PRICE AND WILL BE borne by the BUYER.

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...

100 ton x 3000mm with ANTIL Robot

Hydraulic press brake: AMADA type HFP 1000-30 Network Technology, rb: 2005, top model of the best manufacturer of this type of machine. Dual speed X,R and Z axis. Opening of 550 mm. Long stroke increased to 350 mm Bending length: 3100 mm; Between columns: 2650 mm; Loading: 350 mm; Pressure: 100 t CNC controlled press Amada AMNC PC, 3D graphics, Polish language, TFT screen 15 color. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 7.5 t. 9 kW drives. Fiessler lasers. Machine complies with the CE Machinery Directive. Tools - complete, segmented tools. Full original DTR, instructions for the machine and control in Polish, health and safety manual in Polish.

Hydraulic press brake: AMADA type ITPS 100-3. Bending length: 3100 mm; Between columns: 2650 mm, Loading: 350 mm, stroke 105 mm; Pressure: 100 t CNC Ema press, graphics. Controlled axes -Y-X1-X2-R1-R2 + automatic compensation of table bend. Quick-change Amada-type punch holder. Machine weight 7 t. Drives 9 kW. Tools - complete set, Amada standard sectioning tools - 2 SLOT V16 and 24 mm die + Amada Amanit Punch. Full original DTR, workplace health and safety instruction in Polish.

pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...

Description: 100 ton power Total bending length 3,100 mm Distance between uprights 2,705 mm Gooseneck depth 420 mm Motor power 11 kW Apron travel 200 mm 7 axes Y1 Y2 X1 X2 R Z1 Z2. CNC OP 2000. Sick' gate weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,090 x 2,635 mm

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

Press brake: Amada HFE 170-3 Year of construction / Year: 2000 CNC 8 axis: 2Y + 2X + 2Z + 2R Pressure / Pressure: 170 ton Bending length : 3000 mm Stroke / stroke max. 200mm Weight / weight: 11.6 ton

LKI300 loading / unloading system - Control type: FANUC 04PC - Number of turret stations (pcs): 45 - Number of index tool stations, max: 4 - Punching force: 300 kN - Working area max: 2.500 (5.000) x 1.250 mm - Material thickness (punching) max: 6 mm - Dimensions (long x wide x high): 4.673 x 4.120 x 2.450 mm - Weight: 13.500 kg

Amada Promecam GPS 3100 x 12 mm CNC Cuttinglength: 3100 mm Max sheetthickness st 45: 12 mm Backgauge: CNC Electric motor (power): 15 kW Length: 3600 mm Depht: 1820 mm Height: 2120 mm Weight: 10 ton number of sheetholders: 16x

CO² laser cutting machine make AMADA type LC 3015 D2Year of manufacture 1997Technical specifications:Cutting size X: 3000 mmCutting size Y: 1500 mmCutting size B: 165 mmPower: 3000 wattsControl: Fanuc 16LWith- Resonator C 3000 L- cooler- Compressed air treatment- shuttle table- Operating hours 7900used, still in operation, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC controlled backgague CNC knife play adjustment CNC cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3600 mm Depth: 2050 mm Height: 1950 mm Weight: 6,3 ton Number of sheet holders: 16x

Type: HFT 130-3 3 axes: Y1 / Y2 / X Capacity: 130 ton x 3140 mm Backgauge: CNC Control: Graphique CD2005 Passage between uprights: 2700 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 420 mm Table width: 90 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Length: 3995 mm Depth: 2020 mm Height: 2820 mm Weight: 8150 kg

plate high hold system CNC controlled backgague manual knife play adjustment manual cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3560 mm Depth: 1990 mm Height: 1955 mm Weight: 6,3 ton High hold system: yes Number of sheet holders: 16x

Laser power: 6 kW Oscillator: AF 6000 Positioning speed: 120 m / min Working area: 3070 x 1550 mm The principle of the laser: flying optics Cutting speed: 0 - 60 m / min. Cutting thickness: steel up to 25 mm, stainless steel up to 20 mm. Length - 9845 mm Width - 4245 mm Height - 2015 mm Weight - 11,000 kg.

Table size : 3000 mm x 1500 mm Power : 3.5 KW Fanuc resenator Machine is in good condition

Force 170 T Bending length 3000 mm Distance between posts 2700 mm CNC AMNC Throat 420 mm Vertical stroke 350 mm Engine power 16.5 kW Length x width x height 4533.0 × 2650.0 × 3140.0 Weight 12750 kg

Amada LST 3015-X1 Laser Cutting Machine All maintenance has been done regularly Maximum sheet size : 3000 x 1500 x 20 Maximum Load : 720 KG

Used Amada LCV 3015 B2 laser cutting machine Iron up to 20 mm Stainless steel up to 12 mm Aluminum up to 6 mm

Resonator power 4000 W 2000 W Working range X and Y: 3420 x 1550 mm Z-axis working range: 200 mm Max. table load: 920 kg CNC: AMNC3i Weight: 10500 kg

Machine is under power and can be inspected. The machine comes with the latest 3i software.

The machine is in good technical condition. Upon prior arrangement, inspection is possible, the machine is dismantled and ready for shipment.

Amada Optiplex Nexus 3015 Fiber Laser Cutting Machine 3000 mm x 1500 mm Power : 3 KW Machine is in good working condition

Working hours machine: 61.000 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min

Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.

CO2 laser cutting machine (AMADA type FO-3015 MII NT CI) - 4000 Watt resonator w standard equipment according to the offer: travel range 3070 x 1550 x 200mm maximum thickness of cut material: Normal steel - 20mm Alloy steel - 12mm Aluminum - 10mm displacement speeds of 113m / min specially cast machine bed pallet changing system telescopic cabin - protection against radiation laser head with capacitive sensor programmable Z axis diode laser for positioning laser power control (DR) Intelligent Cut Control - (ICC) auto focus recognition of the position of the sheet Active Cut - rays telescope Clean Cut Alu Cut Power Piercing oil spray device 5 and 7.5 lenses with replaceable cartridge WACS system suction system cooling system ROTO- CI - Profile cutting unit - installed in the FO-3015 lase ...

Equipment for stamping sheet material produced by Amada is on sale. Machine Vipros 358 King was produced in 1999 in Japan, force 30 t, revolver 58 stations with 4 auto index, brush table type, processing area 1270x4000 mm, maximum sheet thickness 3.2 mm. The equipment was serviced by an official AMADA dealer. The machine is equipped with basic tools and software AMADA and METALIX.

-resonator power:4 kW -machining range:3000x1500 mm -Z axis range:100 mm -maximum cutting thickness black steel:20 mm -maximum cutting thickness stainless steel:12 mm -maximum cutting thickness aluminum: 10 mm -maximum load on the table:920 kg -machine weight:11000 kg -automatic storage

Amada LC 3015 X1 NT Laser Cutting Machine with automatic pallet changer CNC Control Unit : LC20BP2 Working area : 3000X1500X120 Power : 4000 WATT Maximum working weight : 750 KG Automatic pallet changer Dust collecting device is not included!

Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Feed length Y-axis: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

Cutting length: 3100 mm x 6 mm, full CNC control. Variable knife angle and knife gap, set by the computer after entering the gr. and length of the material. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6.5 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Capacity 30 tons (294kN) X axis 2000mm / Y axis 1270mm Maximum sheet thickness 6.35mm normal steel Maximum plate 1525 x 4000mm 45 stations: 24 x A (Max. Dia. 12.7mm) 12 x W (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) 2 x E (Max. Dia. 114.3mm) Auto Indexing: 2 x W (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm)