compressors used for sale

Key data: 75 , 12 , 12

We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...

Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: compressed air supply, Capacity: 8 m3/min, Stage pressures: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz

Inv. Num. : 6939 Type: S132 Producer: Ingersoll Rand Created: 2017 Parameters: Capacity:: 31500 l/min Operating pressure: 8.5 bar Speed: 2995 1/min Machine weight: 3400 kg Equipment: Compressed air dryer Ventilation

wisAIR oil-free air compressor including compressed air dryer and air filter. air compressor: - max. allowable working pressure: 13 bar - capacity: 146,5 l/s - motor power: 55 kW, Additional title: oil-free screw compressor, Capacity: 146 l/s, Max. working pressure: 13 bar, Motor drive: 5200 rpm, Power: 55 kW, Voltage: 400 V, Frequency: 50 Hz, Weight: 1195 kg

Inv. Num. : 6428 Type: ST 45 Produzent: ATMOS Erzeugt: 2021 Parametern: Einschaltstunden: 461 h Betriebsstunden: 78 h Drehzahl: 3600 1/min Motor: 45 kW Ausstattung: Der Luftschacht Entwässerungsfilter

oil-free compressor, Additional title: oil-free screw compressor, Capacity: 1 m³/min, Working pressure: 8 kg/cm² = 7,8 bar, Max. pressure: 10 kg/cm² = 9,8 bar, Power: 22 kW, Voltage: 400 V, Frequency: 50 Hz/FU, Length: 1100 mm, Width: 1600 mm, Height: 1471 mm, Weight: 640 kg, Features: Swan-air compressor Type SDU-415N with 4 cylinders; MTA air dryer Type DEiT018

Inv. Num. : 6505 Type: UNIGY 11kW-8 Producer: Ingersoll-Rand Created: 2004 Parameters: Total power: 11 kW Max pressure: 22 bar Maximum temperature: 60 C Machine weight: 46 kg Equipment: Compressed air dryers

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

SOLLANT SLT 15 rotary screw compressor built in China in 2021 is a versatile device designed to deliver the highest quality compressed air. The compressor’s special modular design features a small number of parts and connectors, ensuring efficient and uninterrupted operation even during the most demanding industrial applications. The SOLLANT SLT 15 rotary screw compressor also features an integrated SOLLANT LGA-2.6 refrigeration dryer, which continuously removes moisture and water vapour from the compressed air, minimising the risk of corrosion. All key operating parameters are continuously monitored by a MAM-880 controller with electronic display and sensors. The total weight of the machine is 550 kg. Technical specifications of the SOLLANT SLT 15 compressor - power: 15 kW - maximum operating pressure: 1 MPa (10 bar) - capacity: 2.1 m3/min - drive type: direct drive - refri ...

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: compressed air supply system, Operating hours: 2169, Flow: 1 cbm/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1 m³/min , Volume flow at 4 bar: 1 m³/min, Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

WORTHINGTON CREYSSENSAC RLR 20 CE rotary screw compressor was built in Italy in 2022. The easy-to-maintain compressor with innovative technology provides users with high-quality compressed air at low operating costs. The motor, inverter and other machine components are cooled by a separate airflow with a low operating temperature, and the use of direct-drive gearbox ensures high energy efficiency and operational reliability. The ROLLAIR 20 screw compressor has a capacity of 137 m3/h at a maximum operating pressure of 10 bar. The compressor’s internal water separator with automatic drain and DS13 refrigeration dryer immediately remove moisture from the compressed air, guaranteeing long and trouble-free machine operation. A state-of-the-art Airlogic² controller enables operation with different pressure ranges and allows continuous monitoring of key operating parameters. The total wei ...

COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 722 x 1555 x 1080 Weight: 424 kg Compressed air connection: 1

Compressor AIRPOL 15 manufactured in 2008. Technical data : - capacity: 120 m3 - overpressure: 10 bar - engine speed: 3000 / min - engine power: 15 kW - dimensions (length x width x height): 1100 x 650 x 1180 mm - weight: 340 kg

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 1072 x 1555 x 1080 Weight: 524 kg Compressed air connection: 1

The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 " - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 " - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700  ...

Pressure: 10 bar Motor: 11 kW Free air delivery: 1,76 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 505 kg Compressed air connection: 1

With the help of our rental machines, you can bridge the time periods during which there is an increased demand for compressed air. This is useful, for example, in the event of unexpected peaks in demand or the failure of one of your own compressors. The usual high BOGE quality standards also apply to our used rental machines – in addition to various compressors, a wide range of high-performance compressed air components is available for you. Before renting, all machines are carefully reworked and tested – we give you a guarantee for this. Visit the BOGE compressors Used Machinery Shop

Pressure: 10 bar Motor: 22 kW Free air delivery: 3,21 m³/min Measurement (WxHxD): 1072 x 1735 x 1056 Weight: 561 kg Compressed air connection: 1

Key data: 75 , 10 , 11

BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...

Pressure: 13 bar Motor: 18,5 kW Free air delivery: 2,32 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1

Key data: 15 , 8 , 1

As good as new Scoll compressor TECHNICAL DETAILS Power supply: 400 V / 50 Hz / 3 Ph Flow rate: 1780 litres/min Power: 15 kW Pressure: 8.0 bar[g] Nominal power: 2 x 7.5 kW Sound level: 65 dB(A) MACHINE DETAILS Length: 1400 mm - Width: 920 mm - Height: 1020 mm Machine weight: 485 kg Compressor 1: 6 operating hours Compressor 2: 5 operating hours Functionally tested, without warranty

Pressure: 10 bar Motor: 30 kW Voltage: 400 Volt / 50 Hz Free air delivery: 4,1 m³/min Measurement (WxHxD): 1350 x 1585 x 900 Weight: 590 kg Compressed air connection: 1 1/4

Compressor, Mark MSA 11kW, Used TECHNICAL FEATURES: Power of the installed engine: 11 kW / 15 hp Operating pressure: 10 bar Effective air flow rate: 1.43 m³/min at 9.5 bar Noise level: 63 dB(A) Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: ES3000 Dimensions: L x W x H: 995 x 655 x 1045 mm Weight: 235 kg

Pressure: 13 bar Motor: 11 kW Free air delivery: 1,31 m³/min Measurement (WxHxD): 2036 x 1915 x 915 Weight: 740 kg Compressed air connection: 1

Like new, only 580 m/h with small scratch from transportation. Very low working hours shown in photos. Ideal condition.

Pressure: 10 bar Motor: 37 kW Free air delivery: 5,78 m³/min Measurement (WxHxD): 1620 x 1450 x 960 Weight: 760 kg Compressed air connection: G 1 1/4