Four-column screw press make AGEO type SP 40/650Technical specifications:Pressure force: 40 tAchievable maximum pressure: 50 tSpindle diameter: 95 mmNumber of guide columns: 4Clear width between the columns: 650 mmInstallation height: 440 mmRam stroke: 345 mmTable surface: 650 x 550 mmPlunger surface: 580 x 250 mmPusher bore: 50 mmTable height: 690 mmDimensions L x W x H: 1800 x 1200 x 1800 mmWeight approx. 2210 kgWith- hydr. Rear lifting deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always availabl ...

Two-column screw press make AGEO type SP 28/510Machine -No: 1596 built in 1966Technical specifications:normal pressing force: 28 tachievable compressive force: 32 tSpindle Diameter: 80mmSpindle pitch per revolution: 48 mmClear width between the columns: 510 mmMax. clear installation height between table and ram: 380 mmStroke of the ram: 260 mmRam clamping surface: 470 x 210 mmPlunger Bore:40mmTable surface: 510 x 400 mmHole diameter: 150mmProtection and grip ring diameter: 1550 mmHeight of the top of the table above the floor: 700 mmMachine height: 2200 mmApprox. weight: 840 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointmen ...

Arbor press with ratchet drive make AGEO type DP 2Fabr. -No: 1231, built in 1964Technical specifications:Pressure force: 1.5 tProjection: 220 mmInstallation height: 350 mmRam diameter: 50 mmRam stroke: 350 mmWeight with underframe approx: 130 kgwith- Lever with ratchet- underframe- Support plate with slotsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Specifications: Compressive force 40 tons max. achievable compressive force 50 tons Table size W x D approx. 650 x 550 mm Passage between uprights 650 mm Diarrhea hole 150 mm Plunger 580 x 250 mm  ...

• more information

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm  ...

• more information

AGEO SP 60/1000 Four-column screw press with hydraulic return stroke Ctgywn3w Year of construction 1998 CE marking Compressive force 60 tons Four management pillars Hydraulic return stroke Clear width between the columns 1000mm Groove table 900x700mm Passage max.415mm Dimensions: LxWxH approx. 1.8x1.5x2.5meters Weight approx. 3000Kg

Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm -Pitch: 48 mm/rev. -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Technical review: 2017; Printing capacity: 40 / 50 t; Spindle diameter: 95 mm; width between columns: 650 mm; max. height between table and ram: 440 mm; spindle stroke max.: 345 mm; table surface (width x depth): 650 x 550 mm; drop-down hole in the table: 90 mm; tenon hole in ram: Ø 50 mm; machine color: blue / white / red

Description: lichte Weite zwischen den Säulen ca. 500 mm Neigung vor der Drehung ca. 48 km , Druckkapazität 28 Tonnen table surface area l x w : 500x400 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 1,900 mm, weight approx.: 350 kg ...

• more information

3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls  ...

• more information