We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
ZTS KOSICE LEK 160 eccentric press was built in 1985 in Czechoslovakia. The press, operating with a force of 160 tonnes and a slider making up to 50 strokes per minute, is designed for, e.g. punching, cutting and pressing of workpieces. Machining is performed on a large work table with a length of 1000 mm and a width of 740 mm, with full illumination in the form of a lamp mounted on the body of the KOSICE LEK 160 machine. The total weight of the machine is 12180 kg. Technical data of the ZTS KOSICE LEK 160 press - maximum press force: 160 t (1600 kN) - work space dimensions (L x W): 1000 x 740 mm - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 32/min - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider adjustment range: 100 mm - reach: 355 mm - workspace illumination - weight of the KOSICE LEK-160 machine: 12180 kg
used
Hydraulic swivel bending machine Year of construction 1978 Power 2.000mm x 2,5mm Engine 2,2KW Weight approx. 2,8to Technically good condition Condition according to photos. Machine ready for demonstration under power.
used
Eccentric press LE 400
used
Press brake, bench brake, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 -Drive: hydraulic -Max. Working width: 2000 mm -Max. Sheet thickness: 2 mm - Connected load: 2.2 kW -Dimensions: bench 2850/1100/H1400 mm / aggregate 720/540/H760 mm -Total weight: 2160 kg
used
Description: serial number: 038622316 max. sheet width: 1000 mm max. sheet thickness: 2.5 mm Approx. Onsite Dimension. (l x w x h): 1,900 x 1,100 x 1,500 mm, weight approx.: 520 kg
used
Description: working length: 2000 mm max. sheet thickness: 2 mm machine is in good technical condition, after previous agreement the possibility of testing Approx. Onsite Dimension. (l x w x h): 2,780 x 640 x 1,390 mm, weight approx.: 2,300 kg
used
Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg
used
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg
used
Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request
used
very fast Eccentric press, make SCHULER , tested , electrically connected Type PDv 25/200 Masch.-No. 70/32.0610/9 Technical data: Power 25 to Number of strokes approx. 180 /min Extension 200 mm Impact stroke 8 - 80 mm Shock sift creation approx. 60 mm Table size approx. 570 x 410 mm Installation height approx. 310 mm (measured with mounted clamping plate) Width x Depth approx. 1.1 x 1.35 m plus control cabinet Height approx. 2.15 m Engine power 3 kW Weight estimated approx. 1.5 to
used
Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date
Raskin Master 50 ton Capacity: 50 ton Deph of throat: 240 mm Max adjustable stroke: 10 > 80 mm Distance between table -- ram: 360 mm Table area: 650 x 500 mm Electric motor (power): 5,5 HP Weight: 2350 kg
used
Plunger pressure 4 t Stroke rate 70 / min
used
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg
used
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Hole in the table: 100 x 210 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space requirements: 1300 x 800 x 2000 mm Weight: approx. 1450 kg
used
Thomas 10 ton Capacity: 10 ton Deph of throat: 250 mm Table area: 285 x 240 mm
used
Key data: 75 t
Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm
used
Bret PCK 160 ton Capacity: 160 ton Deph of throat: 405 mm Max adjustable stroke: 20 > 200 mm Workingspeed: 40 > 80 strokes/min Passage between uprights: 960 mm Max ram adjustment: 150 mm Electric motor (power): 22 kW Length : 2050 mm Depth : 2235 mm Hight: 4200 mm Weight: 18 ton
used
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
used
Capacity: 40 t Stroke: 230 mm Distance column/center (Throat): 0 mm Table length: 0 mm Table width: 0 mm MACH-id 5199 MAKE Dirlinler TYPE CDCS 401 P81 YOP 1997 SPECIFICATIONS Hydraulic / Mechanical Mechanical Press force 40 Ton Throat 230 mm Die height 280 mm Stroke Length 5 - 75 mm Power 4 kW DIMENSIONS Length 1200 mm Width 1740 mm Height 2100 mm
used
Capacity: 200 t Stroke: 900 mm Distance column/center (Throat): 680 mm Table length: 1450 mm Table width: 850 mm Eccentric press SANGIACOMO - T 200 FPR 7055 = Mach4metal Capacity Kg: 200000 Table Length: 1450mm Table Width: 850mm Hole in table:240mm Working height:960mm Ram size: 900 x 680mm Throat: 435mm Stroke: 19 - 230mm Ram adjustment:110mm Strokes: 45Min. Length: 2360mm Width: 1780mm Height: 3865mm Weight: 19000kg
Type: RPRX/25 double hand control movable protective screen around table Ejector force: 1,6 ton stroke of ejector: 110 mm Capacity: 25 ton Max ram adjustement: 450 mm Max counter-pression in table: 12,5 ton Adjustable stroke - counter pression: 180 mm Eletric motor (power): 15 HP Height: 2600 mm
used
Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg
used
ZM 125 ton Capacity: 125 ton Length: 2350 mm Depth : 1300 mm Height: 2700 mm