used ZMM BULMAK Engine Lathes Sliding Surfacing And Screw Cutting Lathes

turning diameter: 440 mm turning length: 1000 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2250 kg dimensions of the machine ca.: 2450 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mm turning length: 1500 mm swing diameter over bed slide: 420 mm Swingdiameter in the bed bridge: 850 mm centre height: 330 mm reus: 15 (9 - 1320) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 103 mm feed: längs 0,039 - 18 m/min feed: quer 0,02 - 9 m/min total power requirement: 11 kW weight of the machine ca.: 4170 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 285 mm Center width: 1500 mm Circumferential Ø: above bed 580 mm Spindle bore: 72 mm Spindle mount: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 20 - 2000 rpm Feeds: longitudinal/flat 0.05-16.32/0.025-8.16 mm/rev Thread pitches: 0.5 - 120 mm Electrical connection: 400 V, approx. 10 kW Dimensions: 3000 x 1250 x 1550 mm Weight: 2860 kg

Saw Type ON 254

diameter: 80 mm width: 25 mm thickness: 1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic hacksaw make BULMAK type OH 253Fabr. -No: 1286 built in 1986Cutting area round: 280 mmxa0xa0xa0 flat: 250 x 250 mmxa0xa0xa0 45 °: 180 mm6 medium speeds: 10 - 32 m / minSaw blade length: 450 mmDimensions L x W x H: 1400 x 700 x 1000 mmWeight approx: 570 kgWith- Cooling device- miter viceused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...

Key data: 417 , 830

Lathe in excellent condition, mechanically like new. Technical data: - Centres height: 417 mm - Distance between the centres: 2000 mm - Spindle hole 113mm - Bench width: 560 mm - Turning diameter on the bench: 830 mm - Turning diameter on the deep hole: 510 mm - Visualization by DRO Available for immediate delivery. Machine in excellent condition, like new!

turning diameter over bed: 325 mm turning diameter over slide rest: 190 mm turning length: 500, 750, 1000 mm spindle bore: 32 mm turning dia. in gap: 440 mm spindle turning speed range: (12) 85 - 2000 U/min metric threading: (48) 0,1 -28 mm thread - inch: (53) 75 -2,5 inch. thread - module: (19) 0,1 - 1,75 Tpi Whitworth-thread: (19) 70 - 4 DP bed width: 200 mm spindle cone: gr. 5 number of feeds: 48 mm/U longitudinal feeds:: 0,006 - 1,77 mm/U face feeds: 0,003 - 0,888 mm upper slide-adjustment: 95 mm diameter of quill: 40 mm : gr. 3 quill stroke: 100 mm total power requirement: 2,2 kW weight of the machine ca.: 770 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small s ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 bis 6000 mm spindle bore: 155 mm turning dia. in gap: 1050 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 80 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm thread: 80 Stufen face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 250 kW weight of the machine ca.: 6550 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1 ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 4000 mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm : MTS quill stroke: 230 mm total power requirement: 11 kW weight of the machine ca.: 2650 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed ...

turning diameter over bed: 630 mm turning diameter over slide rest: 430 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 830 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 500 mm spindle cone: Gr. 11 number of feeds: 64 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: MT5 mm total power requirement: 11 kW weight of the machine ca.: 3010 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m.  ...

turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1000 bis 5000 mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 80 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2710 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. v ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 700 mm number of spindle speeds: 11,5 - 1400 metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 11 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 130 mm : MTS quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed, 3 steps rapid traverse throu ...

turning diameter over bed: 325 mm turning diameter over slide rest: 190 mm turning length: 750 (500 o.1000) mm spindle bore: 32 mm turning dia. in gap: 440 mm spindle turning speed range: (12) 85 - 2000 U/min metric threading: (48) 0,1 -28 mm thread - inch: (53) 75 -2,5 inch. thread - module: (19) 0,1 - 1,75 Tpi Whitworth-thread: (19) 70 - 4 DP bed width: 200 mm spindle cone: gr. 5 number of feeds: 48 mm/U longitudinal feeds:: 0,006 - 1,77 mm/U face feeds: 0,003 - 0,888 mm upper slide-adjustment: 95 mm diameter of quill: 40 mm : gr. 3 quill stroke: 100 mm total power requirement: 2,2 kW weight of the machine ca.: 720 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small ...

Center height: 160 mm Center distance: 750 mm Spindle bore: 0 mm MACH-id   3717 MAKE    ZMM Sliven TYPE    HU 310 VAC YEAR    1999 SPECIFICATIONS Swing over bed Ø  320 mm Swing over cross slide   185 mm Distance between centres   750 mm Work piece weight   100 kg Spindle bore    32 mm Spindle speeds / ranges    Vario 2200 Rpm Bed width   200 mm Power    2.2 Kw DIMENSIONS Length   1885 mm Width    1100 mm Height   1730 mm

Center height: 0 mm Center distance: 1500 mm Spindle bore: 155 mm Make ZMM 1.000 mm Type C 13 SH Year 2001zmm draaibank drehmaschine lathe machine Centre height (mm)Swing = 1.000 Center distance (mm)DBC = 1.500 Spindle bore Bore = 155 Speeds 22 steps 1.000 Rpm 2 axis digital readou t4 chuck 1.000 mm  

ZMM C11MB conventional lathe, manufactured in Bulgaria, is used for machining workpieces with a maximum length of 1000 mm and a diameter of 460 mm (turning above bed) or 350 mm (turning above support). The offered C-11MB x 1000 mm universal lathe of indestructible design has been equipped with a 7.5 kW main motor and a high-speed spindle to provide the user with maximum productivity and reliability for many years. Technical data of the ZMM C11MB metal lathe - maximum workpiece diameter (turning above bed): 460 mm - maximum workpiece diameter (turning over support): 350 mm - maximum workpiece length at the tusk: 1000 mm - maximum spindle speed: 2000 rpm - minimum spindle speed: 16 rpm - number of spindle speeds: 18 - spindle passage: 65 mm - motor power of ZMM C-11MB lathe: 7.5 kW

Spindle power: 15kW Incl. glasses

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 2000 (or 1000, 1500 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2560 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 (or 1500, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2230 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...

turning diameter over bed: 400 mm turning diameter over slide rest: 236 mm turning length: 1500 (or 750, 1000) mm spindle bore: 52 mm turning dia. in gap: 550 mm spindle turning speed range: (12) 50 - 2240 U/min metric threading: 0,25 - 7,5 mm thread - inch: 120 - 4 inch. thread - module: 0,0625 - 1,875 Tpi Whitworth-thread: 480 - 16 DP bed width: 320 mm spindle cone: gr. 6 (DIN 55027) number of feeds: 80 mm/U longitudinal feeds:: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 mm cross adjustment: 235 mm upper slide-adjustment: 110 mm diameter of quill: 50 mm : MK 4 quill stroke: 100 mm total power requirement: 4,0 kW weight of the machine ca.: 1700 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. T ...

turning diameter over bed: 440 mm turning diameter over slide rest: 230 mm turning length: 1000 (or 1000, 2000 mm) mm spindle bore: 62 mm turning dia. in gap: 620 mm spindle turning speed range: (21) 20 - 2000 U/min metric threading: 0,5 - 120 mm thread - inch: 60 - 1/4 inch. thread - module: 0,125 - 30 Tpi Whitworth-thread: 240 - 1 DP bed width: 360 mm spindle cone: gr. 8 (DIN 55027) number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm cross adjustment: 2150 mm upper slide-adjustment: 130 mm diameter of quill: 70 mm : MK 5 quill stroke: 180 mm total power requirement: 4,0 kW weight of the machine ca.: 2560 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU ...