used ZERBST Facing Lathes

Key data: 1800 mm, 3000 mm

Center width: 3000 mm Rotation diameter: 1800 mm above bed / 2800 mm above floor Workpiece weight: 8,000 kg max. Jaw chuck: Ø 1800 mm Speed range: 1.8 - 180 rpm. Spindle passage: 220 mm 3-Axis Digital Readout: Easson ES-14 Equipped with: - Motorized tailstock - Various tooling -Operating instructions Country of origin: Germany Engine power: 34 kW Machine weight: 21.000 kg

Turning diameter: 6400 mm Center distance: 18000 mm Spindle bore: 220 mm Numbers of bed guide ways: 0 Weight between centres maximum: 80000 kg MACH-id   4069 MAKE       Zerbst Germany TYPE         DXP 5 YEAR         1987 SPECIFICATIONS Swing in the gap Ø   6400 mm Distance between centres    18.000 mm Work piece weight      80.000 kg Spindle bore    220 mm Spindle speeds / ranges    22,4 Rpm Power    70 Kw DIMENSIONS Length    25.000 mm Width     15.000 mm Height    10.000 mm

Type DP 4000 Special facing lathe which has been converted to Siemens CNC for making internal conical threads!! Chuckdiameter: 3700 mm Siemens 840D Thread inserts are included, these are used to test if the thread has been correctly turned on the workpiece.

Key data: 5000 mm, 4000 mm, 22000 mm

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...

turning diameter over bed: 5000 mm turning diameter over slide rest: 4000 mm turning length: 22000 mm total power requirement: 36 kW weight of the machine ca.: 53,5 t dimensions of the machine ca.: m Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4.000 mm travel -x axis: 4.500 mm travel -z axis: 600 mm control: Siemens Sinumerik 840D feed range: 0 - 8.000 mm/min Head lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3200 mm turning diameter over slide rest: 2400 mm turning length: 15000 mm faceplate diameter: 2600 mm control: Siemens 840 Dsl workpiece weight max.: 80000 kg accuracy +/-: bis/up to: 0,01 mm spindle motor: 110 kW faceplate speeds from - to: 0-50 U/min total power requirement: - kW weight of the machine ca.: 60 t overhauled and modernized 2009 & 2012/2013 equipped with: - CNC control Siemens 840D SL - 2 supports with 1 controller each - 4-jaw face plate - 2 hydraulic steady rests - hydraulic tailstock Machine is dismantled and stored. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning dia. over bed: 3.520 mm turning diameter over slide: 3.000 mm turning diameter over slide: 2.440 mm turning length: 15.000 mm Control: Sinumerik 840 D SL turning speeds: 50 U/min workpiece weight max.: 80.000 kg turning diameter: orig. 3500 / mod. 2400 mm accuracy +/-: 0,01 ° total power requirement: 110 kW weight of the machine ca.: 154,4 t dimensions of the machine ca.: 20,7 x 6,0 m - The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system. - In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to be reworked.Thus, the entire bearing arrangement was modified and optimally adjusted. - In addition, control and safety-related points had to be modified. - Geometric acceptan ...

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 1,4-74 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm -Dimensions: 530/530/H735 mm -Weight: 144 kg

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Code 151295 Description Facinglathe with center Make WMW NILES Model DP 1 / S 2 Serial number 261 526 149 Year of make 1986 Max. centerheight over base plate 1250 mm Max. swing over base plate 2480 mm Max. swing in Gap 3100 mm Distance between centers 4000 mm Max. workpiece weight betw. centers 10.000 kgs Spindle bore 100 mm Movement slide ( max. ) 1000 ( + 750 ) mm crossslide 630 mm toolslide 200 mm 18 Speeds 5,6 – 280 rpm Motorpower 45 kW Total power 55 kVA Machine weight total ± 18000 kgs Accessoiries 4 chuck facingplate of Ø 1250 mm Condition Machine is in very good condition

Facing lathe DP 800

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Turning diameter: 1900 mm Turning length (Z-axis): 2500 mm Spindle bore: 102 mm Turret positions: 0 Motor power: 45 HP/kW Chuck diameter: 500 mm Swing over bed Ø:        1900mm Swing over cross slide Ø:1520mm DBC Turning Length:      2500mm Spindle bore:            102mm Spindle power:           45kW Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Length:                  6800mm Width:                   2800mm Height:                  2800mm Weight:                  10000kg

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

Turning diameter: 3000 mm Turning length (Z-axis): 3000 mm Spindle bore: 0 mm Turret positions: 0 Motor power: 0 HP/kW Chuck diameter: 0 mm CNC Model: 0 Max. thickness in 40 Kg/mm2 13 mm Max. thickness in 60 Kg/mm2 10 mm Max. workpiece:        3000Ø Maximum sheet thickness:13mm Max. dishing radius:   40mm Min. product Ø:        800 Length:                2875mm Width:                 990mm Height:                2010mm Weight:                2120kg  

Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW

Large head lathe Automatic feed in both axes Face plate 800 mm Turning diameter max. approx. 1400 mm more technical data - see pictures

max. workpiece diameter:110 mm min. workpiece diameter:3 mm workpiece length:30 -400 mm total power requirement:11 kW

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm