used ZENO Wood crushing machines

Slow runner with sliding floor 800 mm rotor width 11 kw motor

Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

SPECIFICATIONS: Crushing chamber mm: 2000 x 1500 Rotor length mm: 800 Installed capacity KW: 18 Capacity: 300/500 kg per hour Screen diameter mm: 18 Hydraulic operation

Feed opening: 800 x 1,000 mm; Hopper capacity: 0.8 m³; Throughput : 2.5 - 4 rm/h Material and screen dependent; Rotor diameter: 300 mm; Rotor length: 800mm; Number of tools: 20 teeth; Screening: hydraulic moving floor: Yes; Suction nozzle: 250mm; Air velocity: 28 m/sec; Motor power: 15kW; Hours: 4165;

Chopper/shredder/shredder to crush by Carpentry waste, carpentry waste, pallets and wood waste of many kinds. Propulsion: 15 kW Insertion dimensions: 800 x 1000 mm Workshop tested in good condition

ZENO Disc Screen ZSS 1200 x 4200 Working width: 1200 mm working length: 4200 mm drive: 2 x 7.5 kW screen fraction: 0-80 mm disk diameter: Ø 350 mm

Drum screen ZENO ZTS 2500, built in 2016, with warranty New drum screen. The machine was never put into operation. It is currently stored by the manufacturer Zeno. The drum screen is suitable for the separation of municipal waste, plastics, paper, Cardboard, wood waste. Specifications: Manufacturer: Zeno Type: ZTS 2500 Year of construction: 2016 Drive power: Electric motor 18.5 kW / 400V Capacity: 100-150 m3 per hour 3 levels of material separation: up to 80 mm, 80-320 mm, over 320 mm First separating stage: 0 - 80 mm Length: 6,250 mm Second separating stage: 80 - 320 mm Length: 3,750 mm Third separating stage: over 320 mm Working width: 2,500 mm Total length of drum screen: 10,000 mm Total machine length: approx. 12,000 mm Colour of the machine: RAL 6029 The scope of delivery includes: Feed hopper for feeding the drum screen via a conveyor belt Screen cov ...

Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg