Category: 503 shredders / Single shaft shredders
Latest update: 25.10.2023 add to watchlist
approved
dealer
item-No.: 158766165
New in: 2018

used

check Seller: Brauner Recyclingtech GmbH
Location: 49324 Melle Land-de

add to watchlist

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Category: 503 shredders
Latest update: 21.12.2023 add to watchlist
item-No.: 162992506
New in: 1986

used

Seller: Karl Bachl Kunststoffverarbeitung GmbH & Co. KG
Location: Land-de
Price: VB 10.000 € add to watchlist

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

Category: 503 shredders / Shredders
Latest update: 12.10.2023 add to watchlist
approved
dealer
item-No.: 162607334
New in: 2010

used

check Seller: Brauner Recyclingtech GmbH
Location: 49324 Melle Land-de

add to watchlist

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 2300 Year of construction: 2010 Specifications: Main drive power: 1 x 75 kW, 134 A rpm: 1500 Hydraulic drive power: 5.5/0.75 kW, 11/1.9 A rpm: 1.500 60s Cutting Crowns Weight: approx. 14,000 kg

Category: 503 shredders / Shredders
Latest update: 12.10.2023 add to watchlist
approved
dealer
item-No.: 162607335
New in: 2010

used

check Seller: Brauner Recyclingtech GmbH
Location: 49324 Melle Land-de

add to watchlist

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1400 x 1600 Year of construction: 2010 Specifications: Main drive power: 1 x 45 kW, 81 A rpm: 1500 Hydraulic drive power: 2.2 kW, 5.0 A rpm: 1.420 Rotor flight circle: approx. 380 mm 40 mm cutting crowns 52 Tools/Cutting Crowns Weight: approx. 5,400 kg Hint: The gearbox housing had a hairline crack, which was glued. (see pictures) It may have to be replaced.

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829409

used

Location: Land-de

add to watchlist

Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829412

used

Location: Land-de

add to watchlist

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829462

used

Location: Land-de

add to watchlist

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829498

used

Location: Land-de

add to watchlist

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 2010318

used

Location: Land-de

add to watchlist

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 4078786

used

Location: Land-de

add to watchlist

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 5887581

used

Location: Land-de

add to watchlist

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Category: 503 shredders / Pre-shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 11152036

used

Location: Land-de

add to watchlist

Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal

Category: 503 shredders / Waste shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 11841083
New in: 2014

used

Location: Land-de

add to watchlist

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Category: 503 shredders / Waste shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 12828665

used

Location: Land-de

add to watchlist

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 18.04.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162598798

used

check Seller: Bödeker Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 18.04.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162599394

used

check Seller: Bödeker Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Category: 209 other wood working machines / Shredder
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 163244184

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 8.867 € add to watchlist

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...

Category: 209 other wood working machines / Shredder
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 163244222

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 8.200 € add to watchlist

CATALOG NO. 7239 TECHNICAL DATA - shaft width 350mm - shaft diameter 260mm - inlet width 350mm - inlet height 120mm - number of knives 11 pcs - autoreverse - sieve dimensions 18x12mm - toothed shaft pulling from the bottom 0.75kW - toothed shaft pulling from above 0.75kW - with vibrorine - vibrochute length 3280mm - vibrochute width 335mm - vibrochute motor 0.75kW - main engine 22kW - feeder dimensions length/width/height 3280x600x510mm - machine dimensions length/width/height 1600x950x850mm - weight 1150 kg – German production - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 36900 PLN Net price: 8200 EUR depending on the price 4.50 EUR Net price: 9711 USD depending on the price ...

Category: 503 shredders
Latest update: 08.04.2024 add to watchlist
approved
dealer
item-No.: 162548183

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

SPECIFICATIONS: Crushing chamber mm: 2000 x 1500 Rotor length mm: 800 Installed capacity KW: 18 Capacity: 300/500 kg per hour Screen diameter mm: 18 Hydraulic operation

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 10.04.2024 add to watchlist
approved
dealer
item-No.: 162924255
New in: 1993

used

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de

add to watchlist

Feed opening: 800 x 1,000 mm; Hopper capacity: 0.8 m³; Throughput : 2.5 - 4 rm/h Material and screen dependent; Rotor diameter: 300 mm; Rotor length: 800mm; Number of tools: 20 teeth; Screening: hydraulic moving floor: Yes; Suction nozzle: 250mm; Air velocity: 28 m/sec; Motor power: 15kW; Hours: 4165;

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 2010328

used

Location: Land-de

add to watchlist

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1820263

used

Location: Land-de

add to watchlist

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Category: 504 sieving machines / Screening machines
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 11152076
New in: 2014

used

Location: Land-de

add to watchlist

ZENO Disc Screen ZSS 1200 x 4200 Working width: 1200 mm working length: 4200 mm drive: 2 x 7.5 kW screen fraction: 0-80 mm disk diameter: Ø 350 mm

Category: 503 shredders / Cutting mills
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 12828799

used

Location: Land-de

add to watchlist

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Category: 505 other machinery for waste disposal and recycling
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 12899548
New in: 2014

used

Location: Land-de

add to watchlist

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
ZENO 3rd category level
  • ZENO cutting mills (1)
  • ZENO drum screening machines (1)
  • ZENO granulators (1)
  • ZENO macerators (2)
  • ZENO mills (1)
  • ZENO post pulverisers (1)
  • ZENO pre-shredders (1)
  • ZENO screening machines (1)
  • ZENO shredder (2)
  • ZENO shredders (2)
  • ZENO single shaft shredders (1)
  • ZENO timber crushers (1)
  • ZENO waste shredders (2)
  • ZENO wood crushing machines (1)
  • ZENO wood shredding systems (2)
  • ZENO woodchoppers (2)
 
RESALE used machinery 25 years online