Category: 209 other wood working machines / Macerators
Latest update: 26.03.2024 add to watchlist
approved
dealer
item-No.: 160443931

used

check Seller: HERBOLD Meckesheim GmbH
Location: Land-de

add to watchlist

Secondary shredder with feed hopper with screw discharge Rotor 1000 mm diameter x 700 mm wide 10 rotor blades, 2 stator knives Motor 110 kW (other motor size available on request)

Category: 209 other wood working machines / Macerators
Latest update: 11.12.2023 add to watchlist
item-No.: 162936715

used

Seller: StanDrew
Location: 83-33 Miechucino Land-pl

add to watchlist

- German production - new knives and counter knife TECHNICAL PARAMETERS: - infeed size 520x1000 mm - motor power 80 kW - four rows of knives - Counter knife - sieve 20 x 20 mm - sieve size 1000 x 900 mm - rotor diameter 600 mm - shaft speed 830 rpm Dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1820263

used

Location: Land-de

add to watchlist

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162598798

used

check Seller: Bödeker Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162599394

used

check Seller: Bödeker Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Category: 501 granulation plants / Granulators
Latest update: 02.11.2023 add to watchlist
item-No.: 162749765
New in: 2012

used

Seller: MachinePoint
Location: Land-es

add to watchlist

Rotor Diameter: 1000 mm

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829409

used

Location: Land-de

add to watchlist

Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg

Category: 209 other wood working machines / Shredder
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 163244184

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 8.867 € add to watchlist

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...

Category: 209 other wood working machines / Shredder
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 163244222

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 8.200 € add to watchlist

CATALOG NO. 7239 TECHNICAL DATA - shaft width 350mm - shaft diameter 260mm - inlet width 350mm - inlet height 120mm - number of knives 11 pcs - autoreverse - sieve dimensions 18x12mm - toothed shaft pulling from the bottom 0.75kW - toothed shaft pulling from above 0.75kW - with vibrorine - vibrochute length 3280mm - vibrochute width 335mm - vibrochute motor 0.75kW - main engine 22kW - feeder dimensions length/width/height 3280x600x510mm - machine dimensions length/width/height 1600x950x850mm - weight 1150 kg – German production - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 36900 PLN Net price: 8200 EUR depending on the price 4.50 EUR Net price: 9711 USD depending on the price ...

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829412

used

Location: Land-de

add to watchlist

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829462

used

Location: Land-de

add to watchlist

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 2010328

used

Location: Land-de

add to watchlist

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

Category: 505 other machinery for waste disposal and recycling
Latest update: 23.02.2024 add to watchlist
approved
dealer
item-No.: 163426869
New in: 2015

used

check Seller: RDA Recycling Machinery GmbH
Location: 28816 Stuhr/Bremen - Germany Land-de

add to watchlist

Disc separator Zeno, type ZSS 1200 x 4500, with FE separator and conveyor technology, very good condition Specifications Disc separator with elevation Manufacturer: Zeno Type: ZSS 1200 x 4500 Year of construction: 2015 Grain size: 0-30 mm Working width: 1200 mm Length: 4500 mm Drive power: 3 x 7.5 kW Separate control panel Elevation height: 1000 mm FE separators Manufacturer: Solau Type: DND-AC M5 Working width: 800 mm Drive power: 2.2 kW Self-Cleaning Device – Wiper Conveyor Feed belt Length: 5000 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.3 m/s Discharge belt Length: 3500 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.4 m/s Discharge height: min. 2000 mm Collection belt fraction 0-30 mm under disc ...

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 1829498

used

Location: Land-de

add to watchlist

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 2831353

used

Location: Land-de

add to watchlist

Stationary double roller prebreaker Drive power 4 x 45 kW Rotor flight circuit 540 mm each Hydraulic sieve flaps 2 x 25 rotor tools

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 2010318

used

Location: Land-de

add to watchlist

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Category: 504 sieving machines / Screening machines
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 11152076
New in: 2014

used

Location: Land-de

add to watchlist

ZENO Disc Screen ZSS 1200 x 4200 Working width: 1200 mm working length: 4200 mm drive: 2 x 7.5 kW screen fraction: 0-80 mm disk diameter: Ø 350 mm

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 4078786

used

Location: Land-de

add to watchlist

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Category: 503 shredders / Cutting mills
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 12828799

used

Location: Land-de

add to watchlist

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Category: 503 shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 5887581

used

Location: Land-de

add to watchlist

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Category: 505 other machinery for waste disposal and recycling
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 12899548
New in: 2014

used

Location: Land-de

add to watchlist

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Category: 503 shredders / Pre-shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 11152036

used

Location: Land-de

add to watchlist

Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal

Category: 504 sieving machines
Latest update: 05.01.2021 add to watchlist
approved
dealer
item-No.: 73367558

used

check Seller: Reinhard
Location: Land-de

add to watchlist

ZENO screening machine type: ZPS 250 good condition information see data sheet Screening machine type of ZENO: ZPS 250 good condition see data sheet Contact at: rerec@web.de or mobile: 0049 16096232593

Category: 503 shredders / Waste shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 11841083
New in: 2014

used

Location: Land-de

add to watchlist

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Category: 503 shredders / Waste shredders
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 12828665

used

Location: Land-de

add to watchlist

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
ZENO 3rd category level
  • ZENO cutting mills (1)
  • ZENO drum screening machines (1)
  • ZENO granulators (1)
  • ZENO macerators (2)
  • ZENO mills (1)
  • ZENO post pulverisers (1)
  • ZENO pre-shredders (1)
  • ZENO screening machines (1)
  • ZENO shredder (2)
  • ZENO shredders (2)
  • ZENO single shaft shredders (1)
  • ZENO timber crushers (1)
  • ZENO waste shredders (2)
  • ZENO wood crushing machines (1)
  • ZENO wood shredding systems (2)
  • ZENO woodchoppers (2)
 
RESALE used machinery 25 years online