british flag
Resale Logo

Wood used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords Wood > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
126397857 201

MARTIN T 72 A for sale
Circular sawing machines


Article number: Kompfau1 Manufacturer: Martin Type: T 72 A Year of construction: 2000 Machine number: V410943 Power supply: 380V / 15 A Blade diameter: 500 mm Equipment: control panel above / before Ritz saw Leng ...

 
Article number: Kompfau1
Manufacturer: Martin
Type: T 72 A
Year of construction: 2000
Machine number: V410943
Power supply: 380V / 15 A
Blade diameter: 500 mm
Equipment: control panel above / before Ritz saw
Length stop: Yes
Digital display: Yes
Accessories: manual
 
Price  
    request
126398390 702

Brotbretter for sale
woodenplate for bread


 
Price  
    request
126374309 201

TAGLIAPACCHI 120x120 for sale
CHAIN SAW for PALLET BLOCKS


SIZING CUTTING MACHINE for TIMBER PACKS - 120x120 working dimension 1200x1200 mm chain motor power 7,5 hp vertical pressure device for pack locking first loading idle roller lenght 2000 mm second loading motorized  ...
used machine
 
SIZING CUTTING MACHINE for TIMBER PACKS - 120x120
working dimension 1200x1200 mm
chain motor power 7,5 hp
vertical pressure device for pack locking
first loading idle roller lenght 2000 mm
second loading motorized roller 2500 mm
unloading motorized roller 2000 mm
transversal inclined motorized belt for scrap parts downloading
machine tested (video available upon request)
 
Price  
  IT   request
126392645 708

CAMAM LIN/4LD for sale
Camam LIN / 4LD sanding line


The machine is designed for grinding simple wooden elements placed in line.
used machine
 
The machine is designed for grinding simple wooden elements placed in line.
2011
35,200 EU?  
  PL   request
126374251 203

SOCOMEC PS 630 for sale
Thicknessing machines


Description: They offer here on a super functional Planer / Thicknesser, the premium brand of Socomec. It is in good condition. There are small traces of use. The machine is fully operational. This machine provides yo ...
used machine
 
Description:

They offer here on a super functional Planer / Thicknesser, the premium brand of Socomec. It is in good condition. There are small traces of use. The machine is fully operational. This machine provides you with a precise and accurate woodworking.

Technical data:

Brand: Socomec

Type: PS 630

Year: 2009

Table sliding rollers 2 PCs adjustable.
Limb pressure bar
Steel / feed roller
Feed 7, 11, 15, 19 m/min stepless
Number blades 4 PCs.
automatic motor brake
Blades: quick change system
electrical height adjustment with knob fine adjustment
Sound insulation
Suction connection D 160 mm
Weight approx. 800 kg
2009
6,900 €  
    request
126388224 109

FULGENS G40 for sale
Heater


Weight approx.: 500 kgDimensions (l x w x h) approx.: 1200 x 800 x 2400 mmDescription: Power 401000 cal/h, supply wood

 
Weight approx.: 500 kg
Dimensions (l x w x h) approx.: 1200 x 800 x 2400 mm
Description: Power 401000 cal/h, supply wood
 
used machinery auction RESALE 800 €  
  IT   request
126374077 201

GMC KGS 400/E for sale
Panel saws


Vertical panel saw GMC model KGS 400/E at CE norms - useful cutting sizes 4200x2200mm - max horizontal cutting height 1950mm - cutting thickness 50mm - motor kw 4
used machine
 
Vertical panel saw GMC model KGS 400/E at CE norms
- useful cutting sizes 4200x2200mm
- max horizontal cutting height 1950mm
- cutting thickness 50mm
- motor kw 4
2009
Price  
  IT   request
126370753 205

HOMAG GENIUS BAZ20/30/12/V/GA for sale
CNC Machining Center


serial number: 0-213-14-3051 Weight approx.: 4000 kgcontrol: PC 83 Dimensions (l x w x h) approx.: 10000 x 2500 x 2800 mmc-axis: mit Drehmomentmitnahme und 3 Punkt setting measure approx (l x w x h): 9250 x 5250 x 2800  ...
used machine
 
serial number: 0-213-14-3051
Weight approx.: 4000 kg
control: PC 83
Dimensions (l x w x h) approx.: 10000 x 2500 x 2800 mm
c-axis: mit Drehmomentmitnahme und 3 Punkt
setting measure approx (l x w x h): 9250 x 5250 x 2800 mm
software: WOOD WOP 5.0
working length x-axis: 3800 (2 x 1200) mm
working width y-axis: 1200 mm
main spindle: HSK F63, Wasser gekühlt, 12 kW
tool changer: 18-fach/ 18-fold
vacuum pump: 2 x 66/100 cbm/h
drilling head vertical x-axis: 11 piece
drilling head vertical y-axis: 7 piece
edge gluing unit: ja / 360°
travelling way Z-axis: 410 mm
path-feed rate max. X-axis: 80 m/min
path-feed rate max. Y-axis: 80 m/min
path-feed rate max. Z-axis: 30 m/min
total power approx: 33 KW
Description: HOMAG GENIUS BAZ20 / 30/12 / V / GA CNC machining center with closed aluminum worktable <,/ b>,

- Pre-skip station and 6-drawer roll automatically
- Laser projection for vacuum vices
- without tools and aggregates
2000
used machinery auction RESALE 8,000 €  
  DE   request
126374075 209

SCM FS 520 for sale
Combi-machines


Code: 0411 Brand: SCM Model: FS 520 - CE Standard 2 Works combined machine (Surface/Thickness planer) - CE Standard Rapid set-up when passing from surfacing to thicknessing operation Tersa shaft Motoriz ...

 
Code: 0411
Brand: SCM
Model: FS 520 - CE Standard

2 Works combined machine (Surface/Thickness planer) - CE Standard

Rapid set-up when passing from surfacing to thicknessing operation
Tersa shaft
Motorized lifting of thicknessing table

Technical data :

Surface planer :
Working width mm 520
Total lenght of tables mm 2300
Fence tilting angle 45°

Thickness planer :
Max working height mm 250
Feed speed mt/min 5-8-12-18
Motor power Hp 7,5
Operating pressure 6 bar
Overall dimensions : mm 2300 x 850 x 1100 h
Weight kg 1120



 
Price  
  IT   request
126355038 205

HOMAG BOF 211/52/R for sale
BOF 211/52/R CNC Nesting Machining Center


serial number: 0-201-23-2924 Weight approx.: 6000 kgcontrol: Power Control PC 85 Dimensions (l x w x h) approx.: 7200x2300x2800 mmpacking measure approx (l x w x h): 7900x2300x2800 mmsoftware: WoodWop working length x-ax ...
used machine
 
serial number: 0-201-23-2924
Weight approx.: 6000 kg
control: Power Control PC 85
Dimensions (l x w x h) approx.: 7200x2300x2800 mm
packing measure approx (l x w x h): 7900x2300x2800 mm
software: WoodWop
working length x-axis: 5240 (2 x 2000) mm
working width y-axis: 1150 - 1300 mm
working height y-axis: 210 mm
main spindle: 7,5 kW
tool changer: 12 fach / 12 - fold
vacuum pump: 2 x 100/140 cbm/h
travelling way Z-axis: 535 mm
path-feed rate max. X-axis: 60 m/min
path-feed rate max. Y-axis: 60 m/min
path-feed rate max. Z-axis: 30 m/min
Description: HOMAG BOF 211/52/R CNC Machining Center with Workbench R with grid grooves

- grid dimensions:
- Pitch 30 mm
- Groove width 7 mm
- Groove depth 7 mm
- Rastersaugstellen 120 mm
- additional grooves in the X direction for mechaniche fasteners, distance 30 mm
- 4 plug connections with single-circuit compressed air system for connection of pneumatic clamping elements

MAIN SPINDLE 7.5 kW WATER COOLED
---------------------------------
- for HSK F63 - DIN 69893
- Room extraction for all tools and aggregates
- Vector controlled asynchronous motor 7.5 KW, water cooled
- Tool weight max. 5 kg incl. recording
- Tool length max. 200 mm from engine spindle lower edge
- Tool diameter:
 , , - Max. 180 mm for milling tools
 , , - Max. 200 mm for sanding tools
- Frequency converter for electronic speed control
- Speed range infinitely programmable from 0 - 18000 rpm
- full torque from 0 - 12000 rpm
- full rated power from 12000 rpm

- without tools and aggregates

Transportation of the dismantled machine requires a transport rack supplied by HOMAG which incurs costs of EUR 4,000,-- plus VAT. After the transport rack has been returned to HOMAG, this amount minus a value deduction of 10 % will be refunded.)
2005
Price  
  DE   request
126374027 209

SICAR SICAR for sale
BIT MORTISER MACHINE SICAR


BIT MORTISER MACHINE SICAR SECONDHAND VOLT. 380

 
BIT MORTISER MACHINE SICAR
SECONDHAND
VOLT. 380
 
Price  
  IT   request
126355101 205

MAKA MASTERWOOD Winner 323 - ZBF 3.2 for sale
CNC Machining Center


Weight approx.: 3500 kgDimensions (l x w x h) approx.: 7500x2400x2400 mmsetting measure approx (l x w x h): 7500x2400x2400 mmpacking measure approx (l x w x h): 7500x2400x2400 mmDescription: MAKA MASTERWOOD Winner 323 -  ...
used machine
 
Weight approx.: 3500 kg
Dimensions (l x w x h) approx.: 7500x2400x2400 mm
setting measure approx (l x w x h): 7500x2400x2400 mm
packing measure approx (l x w x h): 7500x2400x2400 mm
Description: MAKA MASTERWOOD Winner 323 - ZBF 3.2 CNC machining center
machine no.: 00030042
year of construction: 2000
motor data: 380 V - 50 Hz - 36.4 A - 25.2 kW
machining size approx. 3200 x 1250 x 110 mm X Y Z
Drilling head:
vertical drill holes = 21 drills
horizontal X = 2 x 2 drills
horizontal Y = 1 x 2 drills
Grooving saw in X
C-axis
ISO 30 tool holder
5-fold tool changer movable in the gantry
5-fold tool changer on the left at the machine bed as a pick up
main spindle with 6.5 kW
vacuum pump BECKER 100 m³/h
2000
used machinery auction RESALE 6,000 €  
  DE   request
126371062 201

K.SCHULTEN GMBH KS ZA-RKS 650 for sale
Circular sawing automats


Cutting Centre for automatic cropping of plastic materials, aluminium as well as also wooden profiles and aperture set on number of degrees.
used machine
 
Cutting Centre for automatic cropping of plastic materials, aluminium as well as also wooden profiles and aperture set on number of degrees.
2014
Price  
    request
126339287 210

WEINIG Unicontrol 12 CNC for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmweight: 11500 kgLoading meters, approx.: 1360 m Machine is currently being checked # 2428 Weinig Unicontrol 12 CNC, with 2 tenoning spindles ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
weight: 11500 kg
Loading meters, approx.: 1360 m
Machine is currently being checked


# 2428 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario-Table
--------------------------------

Technical Data Summary
--------------------------------
(Possibly additional accessories please inquire)

Total weight: approx. 13000 kg
Slotted part: 5500 kg
Profil part: 5000 kg


Cutting edge saw
--------------------------------
> Cross-cut saw electronically, horizontally infinitely adjustable: NC axis
> Number of tools: 1 pcs.
> Spindle speed: frequency controlled 3000-6000 rpm
> Spindle diameter: 40 mm
> Tool diameter max .: 400 mm
> Motor power: 3 kW
> Laser beam for detecting the saw section:
> Adjustment travel axial: NC axis integrated in the control
> Radial travel range: 150 mm
> Radial clocked to 8 positions for edge rounding from above

Unit for edge rounding from below
--------------------------------
> Axial adjustment together with crosscut saw

CNC controlled length stop
--------------------------------
> Length 4500 mm
> Incl. Positioned crosscut saw integrated into the control


1. Spigot and slotted spindle
--------------------------------
> Number of tools: variable, CNC axis
> Tool clamping length: 640 mm
> Spindle stroke vertical: variable, CNC axis
> Spindle speed: 2925 rpm
> Spindle diameter: 50 mm
> Tool diameter: 380 - 400 mm
> Motor power: 15 kW
> With follow-on counter


2. Spigot and slotted spindle
--------------------------------
> Number of tools: variable, CNC axis
> Tool clamping length: 640 mm
> Spindle stroke vertical: variable, CNC axis
> Spindle speed: 2925 rpm
> Spindle diameter: 50 mm
> Tool diameter: 380 - 400 mm
> Motor power: 15 kW
> With follow-on counter

> VARIOPLUS package
Tapping and slotting table with horizontal CNC axis travel 200 mm


1. Profileing spindle
--------------------------------
> Position: right
> Number of tools: variable, CNC axis
> Tool clamping length: 400 mm with counter bearing
> Spindle stroke vertical: variable, CNC axis
> Spindle stroke horizontal: variable, CNC axis
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tooling circle max .: 232 mm
> Engine power: 11 kW
> Radial adjustment: CNC axis
> Axial adjustment: CNC axis


2. Profileing spindle
--------------------------------
> Position: right
> Number of tools: variable, CNC axis
> Tool clamping length: 400 mm with counter bearing
> Spindle stroke vertical: variable, CNC axis
> Spindle stroke horizontal: variable, CNC axis
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tooling circle max .: 232 mm
> Engine power: 11 kW
> Radial adjustment: CNC axis
> Axial adjustment: CNC axis


Groove tool from above - before the last profile spindle
--------------------------------
> Position: horizontal above
> Spindle speed: 9000 rpm
> Spindle diameter: 40 mm
> Tool clamping length: 40 mm
> Motor power: 3 kW
> Adjustment travel axial: 30 mm
> Radial adjustment: 125 mm
> Radial stroke on 8 positions by pneumatic turret
> Axial stroke on 8 positions by pneumatic turret


Profile spindle - Fitting spindle - at the end of the machine
--------------------------------
> Position: vertical right top
> Tool clamping length: 160 mm
> Spindle speed: 5850 rpm
> Spindle diameter: 40 mm
> Tooling circle max .: 210 mm
> Motor power: 3 kW
> Adjustment travel axial: 115 mm
> Adjustment travel radial: 100 mm
> Radial stroke on 8 positions by pneumatic turret
> Axial stroke on 8 positions by pneumatic turret


Groove tool from below- in the additional stand
--------------------------------
> Position: horizontally down
> Tool clamping length: 125 mm
> Spindle speed: 5850 rpm
> Spindle diameter: 40 mm
> Tooling circle max .: 200 mm
> Motor power: 3 kW
> Adjustment travel axial: 100 mm
> Adjustment travel radial: 100 mm
> Axial and radial adjustment infinitely variable NC axis


Other features
--------------------------------
> Online-capable
> Reverberation device for uneven re-folding
> Double pack
> Return conveyor for 1-man operation: slat conveyor
> Angular window arrangement: swivel angle 75 degrees
> Electronic angle display for inclined windows
> Control: PC Nexus
> NC axis for feed height adjustment
> 1 axially clocked feed roller opposite profile milling units, for production
Of narrow, short parts (e.g., glass-dividing rungs)
> 2 axially clocked feed rollers opposite the profile spindle to 8 positions
By means of a pneumatic turret
> Table top to tool diameter clocked (2 positions)
> Sprout guide consisting of:
Automatically timed guide bar at the stop.
Sprout support strip from above in the area of profile milling unit / fitting
spindle
> Sprout support ledge after the last profiling spindle vertically clocked
> Split pressure plate left for wood widths from 40 to 140 mm
> Automatic central lubrication
> Variot: horizontal CNC axis for slit table with adjustment travel 200 mm

Option:
--------------------------------
Used tools in different systems
(Technical data according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
126360063 1403

A1 PREFAB BUILDINGS Storage Building for sale
Prefabricated Warehouse Building


Used prefab lightweight warehouse building (steel & laminated wood structure) with a covered floor surface area of approximately 1080 square metres, up for deconstruction at the end of 2018. Possible future use: warehous ...
used machine
 
Used prefab lightweight warehouse building (steel & laminated wood structure) with a covered floor surface area of approximately 1080 square metres, up for deconstruction at the end of 2018. Possible future use: warehouse for forestry / agriculture, machine shop, Equestrian Hall or stable, etc.

STRUCTURE:
gable roof composite frame with Uprights made of steel profiles and wooden glulam-beams and steel triangles in frame corner and ridge for rigidity. The secondary structure like gable posts, wall bars and roof purlins consist of solid wood. Reinforcement in longitudinal direction are achieved by roof - and wall bracings made of steel ropes with clamping locks.

APPROXIMATE DIMENSIONS:
Floor surface area: approx. 1080 square metres including of the lateral canopy;
Hall width: 20.00 meters outside wall panel plus canopy 2.5 meters;
Hall length: 48.00 meters, c2c of end frames.
Bay width: approx. 4.00 meters;
Eave height: approx. 6.35 m, top of roof purlins;
Ridge hight: approx. 9.65 m;
Roof pitch: approx. 20 degrees;

CLIMATIC LOADS:
snow load: approx. 0,75 kN/sqm / 75 kg/m2;

ROOFING:
steel trapezoidal and anti condensate insulation.

WALL CLADDING:
steel trapezoidal sheet metal and insulation made of chipboard.

DOCUMENTATION:
Copies of original construction documents (static and drawings) are not available.

LOCATION:
Saxony-Anhalt. Visit by appointment.

AVAILABILITY:
by the end of 2018.

NET PRICE:
upon written request with full company / contact information.
 
Price  
    request
126338823 1900

WODEX for sale
Parallels Set


Weight approx.: 12 kgDimensions (l x w x h) approx.: 450 x 220 x 80 mmDescription: Length 150 mm, height from 15 to 50 mm, in original packaging, unused, in wooden case

 
Weight approx.: 12 kg
Dimensions (l x w x h) approx.: 450 x 220 x 80 mm
Description: Length 150 mm, height from 15 to 50 mm, in original packaging, unused, in wooden case
 
used machinery auction RESALE 60 €  
  DE   request
126359991 201  

GILETT UND SRM VBS1400 for sale
Belt saw systems


entire band saw mill, consisting of two lines of band saw, once Gilett, once SRM with hacker line, with subsequent cutting line EWD DK90, BJ. 2016, with stacking unit MAYERHOFER, BJ. 2016, with drying chamber, with burni ...
used machine
 
entire band saw mill, consisting of two lines of band saw, once Gilett, once SRM with hacker line, with subsequent cutting line EWD DK90, BJ. 2016, with stacking unit MAYERHOFER, BJ. 2016, with drying chamber, with burning with multiple front forklift trucks, wheel loaders, with Sharpening room, with timber cutting saw, with four side Planer WEINIG, truck, complete with workshop equipment for sale - systems still in operation - appointment make out
 
550,000 €  
    request
126338825 1900

WODEX for sale
Parallels Set


Weight approx.: 12 kgDimensions (l x w x h) approx.: 450 x 220 x 80 mmDescription: Length 150 mm, height from 15 to 50 mm, in original packaging, unused, in wooden case

 
Weight approx.: 12 kg
Dimensions (l x w x h) approx.: 450 x 220 x 80 mm
Description: Length 150 mm, height from 15 to 50 mm, in original packaging, unused, in wooden case
 
used machinery auction RESALE 60 €  
  DE   request
126359975 204  

SEYNA Optimatic for sale
Grinding machines


Bandsaw Setup Center, almost new, to visit
used machine
 
Bandsaw Setup Center, almost new, to visit
2011
40,000 €  
    request
126339086 1900

WODEX for sale
Parallels Set


Weight approx.: 12 kgDimensions (l x w x h) approx.: 450 x 220 x 80 mmDescription: Length 150 mm, height from 15 to 50 mm, in original packaging, unused, in wooden case

 
Weight approx.: 12 kg
Dimensions (l x w x h) approx.: 450 x 220 x 80 mm
Description: Length 150 mm, height from 15 to 50 mm, in original packaging, unused, in wooden case
 
used machinery auction RESALE 60 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Post pulverisers DoppstadtAK 535 2013r

Wood waste grinder, Hammer, high speed Doppstadt AK535 Compact -year of manufacture 03.2013 -engine Mercedes-Benz 510KM -weight 22000kg -mileage 5221 hours -hydraulic samonap?d-riding -magnetic separator-nadta?mowy -2.5 ton cutting shaft -36 teeth blade -rear conveyor to move crumbled material -floating floor with a batch roller feeding -the possibility to transport machines (back, legs and separately samonap?du) without having to run the machine -The machine on: list the oils, filters-the ability to apply different baskets blade -for shredding trees, stumps, roots, compost, etc. -perfect for the production of biomass -built on the chassis of trailers 3 axis -machine introduced-not used in Poland Very good condition-ready to go

Semi-automatic sanding machine for wood, varnish, NERLIPN 28

Code: 0405 Brand: NERLI Model: PN 28 Semi-automatic sanding machine for wood, varnish, polyester, with 1 abrasive belt N° 20 pads with automatic lowering by means of selectors Table lenght mm 3000 Table width mm 950 Automatic table raising with electronic display Inverter for belt speed Motor Hp 20 Blowers for abrasive belt cleaning N° 2 suction outlets diameter 160 mm Overall dimensions: mm 4850 x 1850 x1850 h Weight kg 1600

Automatic loader with belt MASTERWOOD3000

Code: 0403 Brand: MASTERWOOD Model: 3000 Automatic loader with belt Lenght mm 3000 Belt width mm 150 Table width mm 350 Motorized belt Overall dimensions mm 3200 x 850 x 1850 h Weight kg 320

CNC Boring and routing machine MASTERWOODPROJECT 316 K

Code: 0401 Brand: MASTERWOOD Model: PROJECT 316 K - CE Standard CNC Boring and routing machine with 3 controlled axis - CE Standard Technical data: Max lenght of piece which can be machined mm 2600 Max width of piece which can be machined mm 1000 Max thickness of piece which can be machined mm 50 Boring unit composed by n° 9 independent vertical spindles - n° 2 double horizontal spindles along X axis - N° 1 double horizontal spindles along Y axis Spindle drive motor Hp 2 Sawing unit for grooves diameter 100 mm Cutting unit 5/9 Hp with tools changer with 4 positions N° 6 bars with vacuum suction cups Vacuum pump Numeric control along 3 controlled axis Suction tube diameter mm 200 Overall dimensions : mm 3700 x 2150 x 1700 h Weight kg 1800

Double sanding grinding machine GALLI - ITALIARCG 1000

Code: 0399 Brand: GALLI - ITALIA Model: RCG 1000 Double sanding grinding machine for drawers, wood doors , edges, panels Max working lenght mm 1200 Max working width mm 1000 Max working height mm 230 Belt dimension mm 250 x 3280 Lateral working table mm 920 x 350 Belt driving motor 7,5 Kw + 7,5 Kw Motor for oscillation 0,37 Kw + 0,37 Kw Overall dimensions mm 2500 x 1800 x 1200 h Weight kg 1200

Impregnating Spraying machine ISVE200/170

Code: 0397 Brand: ISVE Model: 200/170 Impregnating Spraying machine fit for applying solvents upon wood profiles Technical data Height adjustable steel frame Stainless steel sidewalls and bottoms The impregnating product is put into a proper bath by means of a proper pump through spraying nozzles Process of pieces with a variable speed from 10 to 48 mt/min N° 4 roughing brushes N° 4 finishing brushes Sections of pieces vary from mm 20x10 to mm 200x150 Minimum piece length mm 450 Power Kw 2 Infeed and outfeed roller tables Overall dimensions : mm 2300 x 1350 x 1400 h Weight kg 400

Filling installations Tetra Pak VOLUMECONVERSION KIT TBA21 10OO SLIM

THE Tetra Pak COMPLETE VOLUME CONVERSION KIT FOR TBA21 1000 SLIM, MANUF. IN 2010, EXCELLENT CONDITION, IN ORIGINAL WOODEN BOXES. LOCATION IN POLAND

Wood presses LIGNUMFC 10 HK6

LIGNUM F10 HK 6 press for gluing producer LIGNUM Model / machine type F10 HK 6 Production year 2018 Category of machines Press for gluing length Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Start type to be agreed Description Comments FC 10 HK 6 Pneumatic compression × Hydraulic compression - YES Pneumatic compression force. (6 bar) 4800kG × Hydraulic clamping force 7500kG - Saw motor [kW] 1.5 × Saw diameter [mm] 300 × The width of the board j [mm] 40 ÷ 160 Height of the board [mm] 15 ÷ 80 Board length [mm] * max 6050

EdgebanderFully Automatic Edge Bander

Model: Edgebander - Fully Automatic Edge Banding Machine Condition: Used Machine type: Other Location of machine: UK Machine Details Edgebanding machine functions: 1.The glue mechanism adopt a special structure to gelatinize the plates and coating materials uniformly, ensure a more solid conglutination 2.End-trimming mechanism through a precise guide track movement, adopt automatic tracking and high-frequency motor fast cutting structure to ensure the Cutting surface smoothly 3.Rough/Fine Trimming Unit , with two individual high frequency motors, trim the exceeding edge on the top and bottom side of the panel, ensure the top and bottom side of the edge smooth and even. 4.Scraping unit for a perfect finishing of the applied edge. 5.buffing clean up the wood panel,remove all excess glues via 2 cotton wheels(run by a high speed motor) to make a smooth surface,a refined edge banding wood panel is ready. You are strongly adviced to view this machine in operation before purchasing. The price is inclusive VAT. Warranty for main and non-quickly wearing parts 3 months.

AlphaCNCBenchtop Wood Routing CNC

Make: AlphaCNC Model: Benchtop Wood Routing CNC Machine Series BT-6012 Condition: Used Machine type: Other Location of machine: UK Machine Details The power of CNC on your bench Now you can bring the power and capabilities of an industrial CNC router to your desk. The Benchtop Series is the first desktop model with the rigid build of an industrial CNC machine. Designed with industrial ball screws on every axis and equipped with 20mm linear rail, you get better motion and more control than any other machine in this price or size range. The Benchtop Series revolutionizes the desktop market with a high-quality construction that has not previously been available in a machine of this size. The Benchtop Series is perfect for educational settings, hobbyist shops, and startup companies where a large machine simply is not possible or necessary. Complete with manufacturer lifetime tech support, this machine is perfect for every user from a novice to the most experienced CNC user. Contact us today to find out how you can get everything you need from a CNC router that fits right on your desk. Specs: Working Area 600*1200*150mm. 2.2kw water coolant Spindle. Yako Stepper driver. 86 series stepper motor. DSP A11 Controller. 20mm linear rail. All axes ballscrew transmission. Auto tool zero sensor. Cast iron structure. Materials Cut. Benchtop Series CNC can accurately cut virtually any hard material including: Wood Acrylic Plastic Foam Aluminum Brass and More Software. So, what software is involved in CNC? There are primarily three parts: Your CAD (Computer Aided Design) software is where you design your parts to be routed, lathed, milled, or cut. CAM (Computer Aided Manufacturing) software converts your CAD drawings into G-code, which is the programming language that the CNC control software understands. The CNC control software (which is the controller of the machine)then reads the G-code and turns it into motion to drive your machine. Software We recommend (CAD/CAM all in one) Vectric Aspire Autodesk Fusion 360 Mozaik. Specialized in cabinet & furniture CAD Software Google Sketchup Blender Caligari TrueSpace Wings 3D Moi3D Corel CAD ArtCam SolidWorks RhinoCAD SolidEdge AutoCAD TurboCAD Alibre CAM Software Heeks CAD/CAM G-Simple FreeMill Dolphin CAD/CAM CamBam Vizion (ArtCam) OneCNC VirtualGibbs MasterCAM BOBCAD-CAM RAM MeshCAM VisualMill TurboCADCAM DeskCNC SheetCAM OneCNC SprutCam EdgeCAM ArtCAM

PRODOTTI IMBOTTIGLIATIMATERIALE VARIO

For sale by auction at 10:30 the next 25 at our office in Bergamo. Auction for the failure of a distillery, sold stock inventories of spirits, bottling materials, empty bottles, kegs for wine. WAREHOUSE: -nr. 72 pallets of canned and bottled liquors -nr. 140 pallets of empty bottles -Kegs for wine -Pallet and wooden boxes -Pallet packaging materials packaging boxes and various miscellaneous: caps, Contact us at our addresses for more information and schedule an appointment 030 77 51 645

Numerically Controlled Machining Centres MASTERWOODPROJECT 317

CNC WORKING CENTER - MASTERWOOD PROJECT 317 year of manufacturing 1998 CE standard No. 3 axes controlled ISO 30 electrospindle - power 9 hp - rotation from 1.000 to 24.000 rpm 4-position automatic toolchanger dilling unit with 10 vertical and 3+3 horizontal positions blade position along X axis - max blade diameter 125 mm No. 6 suction cups supports with No. 2 suction cups 160x160 mm each No. 4 back reference stops + No. 1+1 on the sides No. 4 lifting panel devices Becker vacuum pump - capacity 100 m3/h working area for milling + vertical and 4-side horizontal drilling: 2600x850 mm working area for milling + vertical drilling: 2920x950 mm vertical working area 65 mm user + electrical manuals

Automatic Calibrating sanding machine BIESSEREGAL 330 - RRK

Code: 0381 Brand: BIESSE Model: REGAL 330 - RRK - CE Standard Automatic Calibrating sanding machine with 3 belts for veneer, solid wood, paint - CE Standard - Year 2006 Max working width mm 1350 - Belt dimensions mm 1370x 2620 Min/max workable thickness mm 3-200 Composition: 1° Group Steel calibrating roller diameter 175 mm 2° Group Rubber sanding roller diameter 250 mm 3° Group Roller diameter 175 mm + Electronic sectioned pad Scotch brite roller Oscillating blowers for the cleaning of sanding belt Vacuum table Pneumatic On/Off on operating units Electronic belt oscillating system Electronic working thickness display Automatic positiong of work table Infeed and outfeed roller conveyor Variable speed on feed belt Inverter on main motors Working pressure 6 Bar N° 6 suction inlets Overall dimensions: mm 2290 x 1935 x 2444 h

Power Supply LV PowerControl Cable

New Surplus Nexans LV Power & Control Cable New Surplus Nexans LV Power & Control Cable is available due to a cancelled power project. The power and control cables are used for electricity supply in low voltage installation system. They are also well adapted to underground use in industrial applications where chemical and mechanical protections are needed (power plants, refinery areas, chemical plants......). Available due to a cancelled project This is an excellent deal to purchase new power and control cable with big savings from the original price of new. Power & Control Cable VOLTAGE GRADE: 0.6/1 kV XLPE/PVC/GSTA/PVC 4G10 8.7/15 kV XLPE/PVC/GSTA/PVC NUMBER AND CROSS SECTION OF CORES: 4G10 TOTAL PACKAGES 73 drums + 2 wooden boxes TOTAL NET WEIGHT 112 240 KGS TOTAL GROSS WEIGHT 135 848 KGS TOTAL VOLUME 221,647 M3

Brush sanding machine WOODLAND MACHINERYDTL-20D

Type DTL-20D Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg

Brush sanding machine WOODLAND MACHINERYDTW-60A

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg

Brush sanding machine WOODLAND MACHINERYDTW-120A

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Get the latest machine offers by email: order newsletter