used WICKMAN Single Spindle Automatics For Bars

Technical data Number of spindles: 8 Capacity round bar: 45 mm Capacity square bar: 31.3 mm Capacity hexagon bar: 38.5 mm Machining rate: from: 7.1 sec up to: 922 sec Spindle speeds: number (steps): 24 from: 96 rpm up to: 1243 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 12700 kg Overall dimensions machine: Length: 6630 mm Width: 1600 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 100 F

Multi Spindle Wickman 1-6 Multispindle automatic lathe.

Multi Spindle Wickman 1-6 Multispindle automatic lathe

Wickman 5/8 + Barloader Pietro Cucchi PB20 The machine is located in Spain.

Used Wickman 25/8 -6 Multispindle automatic lathe Wickman 2 5/8 -6. Excellent machine for big task The car needs a small check. In production until recently, generally very reliable machine.

This WICKMAN 5/8-6 Swiss Type Turning machine was made in 1996. It is equipped with a SIEMENS SIMATIC HMI control unit. The machine has a spindle speed of 400 - 5000 rpm.

Rod lathes Thiel

Index HE 25 with rod feed hydraulically controlled with long turning device

with rod pipe

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.

CNC SPINNING LATHE MANUFACTURER: M+M MODEL: HF450TT/2S SERIAL NUMBER: 26-2453-00 YEAR: 2000 CONTROL MANUFACTURER AND MODEL: Tracktronic Z-AXIS CENTER HEIGHT: 419mm DISTANCE BETWEEN CENTERS: 1200mm Z -AXIS TOOLING ADAPTER: DIN 55027/ Size 15 Z-AXIS DRIVE POWER: 80kW Z -AXIS DRIVE ZF REDUCTION RATE: 1:4 Z-AXIS DRIVE SPEED: 0-1000 RPM step less variable X - SLIDE TRAVEL: 500mm X - SLIDE FORCE: 100kN X - SLIDE VELOCITY: 400mm/min Y - SLIDE TRAVEL: 275mm Y - SLIDE FORCE: 100kN Y - SLIDE VELOCITY: 400mm/min TAILSTOCK TRAVEL: 600mm TAILSTOCK CLAMPING FORCE: 80kN EJECTOR TRAVEL: 450mm COOLANT: yes POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH/60Hz/480V existing SPECIAL FEATURES OR ADDITIONAL ITEMS: POWER RATING 204 HP (152 Kw), CONTROL VOLTAGE 110VOLT / 24 VOLT DC MACHINE WEIGHT: 22000 kg CONDITION: EXCELLENT - VERY LIMITED USE

GENERAL Project No.: 905433 Quantity: 1 pcs. Manufacturer: TORNOS BECHLER Type: MultiDeco 20/6 Control: Tornos Bechler Fanuc PNC Deco Year of construction: 2001 Condition: Used machine Machine on approx. (hrs): 77,725 Layers approx.: 2-3 layers DESCRIPTION TURN 18 axes turning diameter 20 mm 6 pcs. main spindle(s) speed main spindle 6000 1/min power main spindle at ED 10-40/100% 15 kW ADDITIONAL EQUIPMENT Splash guard cladding with fully encapsulated working area Lighting in the workroom Preparation for central oil/emulsion mist extraction system Hinged belt chip conveyor MAYFRAN Consep 2000 Machine is/was operated with oil Coolant device Automatic CO2 fire extinguishing system Bar feeder/bar loading magazine ROBOBAR MSF 522/6 GENERAL TECHNICAL DATA Total power requirement 43 kVA Machine dimensions (LxWxH) approx. 3500x1600x1950 mm Machine wei ...

Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Iemca SIR

Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600

Number of spindles 8 Controller Siemens 810D Chuck diameter: 130 mm Max part diameter: 135 mm Total stroke: 125 mm Working length: 100 mm

Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi

Mori Say TM626 AC, 5 axial slides, 4 cross slides, double slide pos. 6, pickup spindle, swarf conveyor with vibrating filter device, high pressure coolant system, set of tool holders, auto bar loader L = 3 m, Country of origin: Czech Republic, Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: Iemca PRA 52/32 P

- 6 spindles - Guide tubes Equipment according to pictures Available from week 20/2024

Refurbished 1992 Tapping Multi-edge hammering 1x threaded rods 2x threaded spindles Bar feeder Giovanni Cucchi DBMF 26 (YOC 2001) Lots of accessories

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available

Matching bar feeder DMG S Loader, year of construction 2010 unused, lateral sliding device. ( original price at that time 18000,- EUR) Bought for a Guildmaster CTX 310 but never used it.

Curve Controlled Turret Bar Automatic Turning Machine max bar passage 26 mm max. speed 4750 rpm 6-fold star turret max. stroke of the turret slide 80 mm Coolant device Gearbox 2 Double Vertical Support 2 side supports with steel brackets - Reverse machining driven - Oil protection cover - Bar weight feed

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer