used WHEELABRATOR Blasting Machines

ROLLER TABLE BLASTING SYSTEM MANUFACTURER: WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting machining of profiles and sheets Manufacturer: Wheelabrator Berger Type: CRC 400x300 Throughput width: 400mm Throughput height: 300mm Centrifugal wheel: 4 pieces x 4 kW frequency controlled Inlet roller conveyor: approx. 6,000mm Discharge roller coaster: approx. 6,000mm Incl. blow-off station, control cabinet, etc. TOP CONDITION ROLLER BLAST MACHINE BRAND : WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting processing of profiles and sheets. Brand: Wheelabrator Berger Type: CRC 400x300 Inlet Width: 400mm Inlet High: 300mm Wheels: 4 x 4,0kW with Drivers Inlet roll table: ca.6.000mm Outlet roll table: approx. 6.000mm Blowstation: YES Incld. Main Panel., Very good condition! Price: Loading on truck .-€ Price: Loading on Truck .-€ Warranty: 6 months f ...

entry dimensions: 1000 mm wide / 4000 mm high length of chamber: 3500 mm 4 turbines, 5,5 kW each material speed: 63 m/sec 150 kg/min abrasive material per turbine max workpiece weight: 500 kg electric power: 45 kW Kind off: shot blasting unit Turbines: 4 turbines - 5,5 kW each

Roller conveyor type G with Titan blastwheels max entrance width: 1100 mm max entrace height: 550 mm 4 turbines, each 11 kW working speed: 1,4 gt; 2,4 m/min Total power: 62kW Installed on top of floor, no foundation needed! 65 000€ spare parts inlcuded!!!! Length : 15 meter Width : 3 meter Height: 5,35 meter Weight: 20 ton

Infeed and Outfeed roller conveyor transport system for material lengths 2.5-14m Entrance dimensions- 2100 x 600mm The machine can process a plate of 2000mm wide and min. 5mm thickness Transport weight of max 1000 kgm Number of Turbines- 6 Turbines of C-380 11 kW Turbine Power Average speed at BSa 2 12- 1-1.5 mmin Abrasive hopper with screw conveyor 2.2 kW Abrasive used- Round low carbon sheet shot or cut wire Buck elevator with a 5.5 KW gear motor and a broken belt detection sensor Machine with Brush blow off plant Machine equipped with screw conveyor Automatic height adjustment for the brush Automatic adjustment for the 4 outer turbines

Pressure blasting cabin AUER in refurbished condition. Very good work result thanks to pressure blasting technology. Interior with impact protection 1200x1200x1000 mm. workpiece weight 200 kg. Large dust extraction. Platform and accessories.

Te koop: The Normfinisch Turntable blasting machine is suitable for blasting often larger, round products. The products are placed on a turntable and blasted by rotating the table in combination with the oscillating nozzle movement. The turntable is moved outside the cab with a transport system, so that loading with a crane/forklift is possible. The blasting machine is like new. Very little used!!! Areas of application of the turntable blasting machine are: Burr Shotpeenen Roughen For a uniform blasting result, the products rotate on a turntable The basic system is a manual turntable that can be placed on wheels or not in the cabin Different systems are possible for blasting, from manual to fully automatic with several movable guns. The degree of automation depends on the type and shape of the product Still to be seen under power. The original price was 60,000 euros. Please bid!! ...

5214 – AGJ LRFB-2600-850 Blasting machine, painting equipment Manufacturer: AGJ Model No.: LRFB-2600-850 Dimensions of the materials to be processed: Plate: Length: Maximum: 12000 mm Min.: 2000 mm Aisle length: 6000 mm Width: Maximum: 2600 mm Min.: 1000 mm Aisle width: 2000 mm Thickness Maximum: 120 mm min: 3 mm Travel: 8–20 mm Enclosure size: 54.5 x 18.5 m Built-in electrical power: 290 kW Power consumption: 470 A Voltage: 3x400 V

Inv. Num. : 6972 Parameters: Chamber dimensions: 10,000 x 6,000 mm Door size: 4,000 x 3,000 mm Equipment: Abrasive feed conveyor Components: Aviator Air purifier Compressor Filter Blasting machine with wheel conveyor

Operating Tunnel 500 Number of chambers 3 Quantity of rods 63 Number of turbines 2

Blasting Manufacturer: KIESS Year of construction: 2009 Cabin interior dimensions: LxWxH = approx. 5x8x4 m System screwed Inside extraction floor with grates integrated in the building Blast gun with hose and nozzle in addition, outside extraction and filter system with extraction motor Kiess CD355-1 Flow rate 10,000 m³/h Pressure: 350 bar Power: 15 kW Filter Tower DVP140-2 Steel Goods Container Taifun 200 4 extraction motors for floor ducts Elevator height approx. 500 cm Control cabinet Trolley on rails for workpieces approx. 250x125 cm

Inv. Num. : 5122 Type: Tornado Producer: BMF Created: 2018 Parameters: Hours: 2964 h Switch-on hours: 1485 h Throwing wheel: 231 h Max. workpiece diameter: 250 mm Maximum filling volume: 30 l Throw wheel force: 2.2 kW Maximum spindle speed: 9000 1/min Quantity: 12-15 pieces Maximum workpiece weight: 90 kg Machine dimensions: 1500x1500x2000 mm Weight: 900 kg Equipment: Filter system with separation Universal Tool Holder 14 positions of planetary gears Components - Impellers

Inv. Num. : 7171 Type: TZB 1-5.5/700 Producer: Kovo Staněk Generated: Parameters: Max. workpiece diameter: 345 mm Maximum filling volume: 165 dm³ Throw wheel force: 7.5 kW Blasting chamber internal dimensions: 720 x 800 mm Maximum load: 350 kg Max. weight of the part: 15 kg

On and including 2 pallet

On and including 2 pallet

Foot pedal

On and including 2 pallet

Equipped with chest of drawers with Daytona 25KG Glass Beads

Pipe diameter: 219mm, nominal width: 3600mm, including preheating oven, Blasting System GIETART GW 1530-425, centrifuge, coating center, drying tunnel, chain conveyor and color filter, operational hours: ca. 8,000h.

Capacity: 100l, max. operating temperature: 50°C, the machine is integrated into a container.

Connected load: 25kW, length: 3950mm, width: 5200mm, height: 2750mm, with documentation.

Control panel: Siemens SIMATIC HMI, operational hours counter: 2169h, with Deduster MHG 1703-2,2 and various accessories.

Connected load: 14kW, with documentation.

Work Envelope (WxDxH) (mm): 1600x500 Work Handling Method: Grit Sand   Other Info: 4 blasting turbines - Make : Rösler Germany - Typ : RRB 16/5 - Serial : WO 1576 - YOP : 2008 - Max. width : 1.600 - Max. height : 500 - Minimum product length : 2.300 - Minimum thickness : 6 - Workpiece weight Kg : 1.250 - Working speed M/min : 0,5–3 - In feeding height : 800 - 4 blasting turbines - Power 11 kW - Speed 100 M/sec - Roller conveyor feeding in - Roller conveyor feeding out - Filtration System ROSER RF 75/9 P/w Capacity 7500M³ - Under power up to 03.2020 - Incl. double brushes for cleaning - Return to sender for grit sand  

Other Info: Micro Blasting MAKE   IEPCO Peenmatic TYPE     Peenmatic 750 S YEAR    2000 DIMENSIONS Length    740 mm Width      520 mm Height      500 mm Make        : Iepco Swiss Type        : Peenmatic 770 S YOP         : 2006 No.         : 770 - 289   Working internal space   Length        : 740 Width         : 520 Height        : 500 Optimal product 500 x 400 x 250 mm   Dimensions outside   Length        : 870 Width       ...

Other Info: Micro Blasting MACH-id   3898 MAKE       IEPCO TYPE        Peenmatic 620 S YEAR       1999 DIMENSIONS Length    550 mm Width      350 mm Height    400 mm