Category: 1300 other machines and plants
Latest update: 29.03.2024 add to watchlist
item-No.: 163678267
New in: 2006

used

Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Max. workpiece height: 200mm, max. load: 150kg, length: 1300mm, width: 1274mm, height: 1940mm, weight: 1.1t.

Category: 1300 other machines and plants
Latest update: 29.03.2024 add to watchlist
item-No.: 163678351
New in: 2015

used

Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

X-travel: 300mm, y-travel: 200mm, z-travel: 200mm, operating system: Windows 7, software: WinWerth 8.40, weight: 1.5t.

Category: 1300 other machines and plants
Latest update: 29.03.2024 add to watchlist
item-No.: 163678364
New in: 2010

used

Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Measuring range: 400x200mm, with Instruction Manual, the PC needs to be replaced.

Category: 109 other metal working machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 155981488
New in: 2010

used

check Seller: Knops Werkzeugmaschinen
Location: Süddeutschland Land-de

add to watchlist

x-travel: - mm y-travel: - mm z-travel: - mm Control: total power requirement: kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Multisensor-Coordinate Measuring Machine with 4-axis CNC-control WinWerth on Windows PC Measuring range: - Length 500 mm - up to diameter 160 mm - Weight max. 15 kg Kind of measuring: - Optical, Laser, Faser-probe Accessories: - Hydrodehn-clamping chuck with holders from diameter 3-16 mm Excellent condition, low working hours. Inspection under power in the factory possible. New price € 230.000,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1402 other machines for mechanical handling
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162816895

used

Location: Land-de
Price: 60 € add to watchlist

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63 / 86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / thread Ø28 x 25 mm -Cylinder: outside Ø 75 mm -Mounting: bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2x cylinders available -Price per piece -Dimensions: 370/140 / H145 mm -Weight: 11 kg / pc.

Category: 1402 other machines for mechanical handling
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162819129

used

Location: Land-de
Price: 395 € add to watchlist

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: Schorch 1.5 kW 1405 rpm -Sale: in the current condition as seen -Dimensions: 490/340/H585 mm -Weight: 46 kg

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163420370

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKUR0155 * LocationBarneveld * MakePink GmbH Thermosysteme Wertheim (DE) * TypeVSD-e 300-300-120-2 * Machine number2008 4823 * Pressure * Working pressure0.1 Bar * Vacuum possiblecheck * Main Features * MaterialHastelloy * Volume35 Ltr. * Surface0.18 m2 * Specified Features - Tray dryer * Tray dryervacuum * Stainless steel housingcheck * Stainless steel trayscheck * Heating surface0.18 m2 * Drying chamber capacity35 Ltr * Max. temperature150 degr. C * Number of trays2 * Tray sizes300x300mm * Distance between the trays120mm * Max. temperature150 degr.C. * With 1 doorcheck * Connection for the vacuum pumpDN25 * Connections(2x) DN10 * Without vacuum pumpcheck * MaterialStainless steel 2.4602 (Hastelloy C-22) * Information * Year of construction2008 * Mounted on framecheck * With switchgearcheck * Floorspace2.2x1,0 M * CEcheck * Total height2,4 M * Weight1150 Kg * Extra Specifica ...

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163420372

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKUR0159 * LocationBarneveld * MakePink GmbH Thermosysteme * TypeVSD-EX 650-650-140-4 * Machine number2005 4783 * Pressure * Vacuum possiblecheck * Working pressure jacket3 Bar * Main Features * MaterialHastelloy * Volume250 Ltr. * Surface4.7 m2 * Specified Features - Tray dryer * Tray dryercheck * Stainless steel housingcheck * Stainless steel trayscheck * Heating surface4,7 M2 * Drying chamber sizes670x670x140mm (4x) * With jacketcheck * Max. temperature115 degr. C * Number of trays4 * Tray sizes670x670mm * Distance between the trays140mm * Max. temperature115 degr.C * With containers4x * Container sizes650x650x40mm * With 1 doorcheck * MaterialStainless steel 2.4819 (Hastelloy C-276) * Information * Year of construction2005 * With switchgearcheck * Floorspace1,6x1,2 M * CEcheck * Total height2,3 M * Weight1400 KgTray dryersPink WertheimDryers > Tray dryersBrand > Pink Wert ...

Category: 2305 other automation equipment
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 158259555

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453542
New in: 1986

used

Location: Land-de
Price: 2.700 € add to watchlist

3-D coordinate measuring machine ZEISS NUMEREX Granite measuring plate, granite measuring plate, measuring table Model No. 3648-18, Serial. No. X-1019, year of construction approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Probe holder 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz. - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z-axis - Plate on base frame with 5 pieces of adjustable feet, 3 pieces support plate for the adjustable feet - Computer and software missing (not available and not included) Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 ton. Plate damage ...

Category: 1300 other machines and plants
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162094584

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 170 € add to watchlist

welding table, straightening table, straightening flap, work table, clamping table measuring plate with measuring stand, measuring table PAGUS working surface: 300 x 270 mm working height: 50 mm tripod height: 275 mm with measuring stand Ø 12 mm ! Dimensions: 300 x 270 x 330 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162960168
New in: 2016

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 12.500 € add to watchlist

welding table, straightening table, straightening flap, work table, clamping table measuring plate with measuring stand, measuring table PAGUS working surface: 300 x 270 mm working height: 50 mm tripod height: 275 mm with measuring stand Ø 12 mm ! Dimensions: 300 x 270 x 330 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163260360
New in: 2005

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 14.500 € add to watchlist

welding table, straightening table, straightening flap, work table, clamping table measuring plate with measuring stand, measuring table PAGUS working surface: 300 x 270 mm working height: 50 mm tripod height: 275 mm with measuring stand Ø 12 mm ! Dimensions: 300 x 270 x 330 mm

Category: 2500 miscellaneous
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163483648

used

check Seller: Surplex GmbH
Location: Kölleda Land-de
Price: used machinery auction RESALE 20 € add to watchlist

Description: Small measuring table, measuring stand Small measuring table, measuring stand Size: 140 x 300 x 310 mm (WxDxH) Table size: 180 x 105 mm Weight: 14kg Approx. Onsite Dimension. (l x w x h): 140 x 300 x 310 mm, weight approx.: 14 kg

Category: 109 other metal working machines / Measuring Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163610744

used

check Seller: Surplex GmbH
Location: Fuente de Cantos Land-es
Price: used machinery auction RESALE 500 € add to watchlist

Description: General Characteristics Distance between points 405 mm Approx. Onsite Dimension. (l x w x h): 480 x 410 x 840 mm, weight approx.: 150 kg

Category: 109 other metal working machines / Measuring Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 144523958
New in: 1992

used

Location: Land-de

add to watchlist

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ ...

Category: 109 other metal working machines / Measuring Machines
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 158786905
New in: 2019

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 25.955 € add to watchlist

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...

Category: 109 other metal working machines / Measuring Machines
Latest update: 10.11.2023 add to watchlist
approved
dealer
item-No.: 106827661

used

check Seller: W&T EFRA
Location: Philippsburg Land-de
Price: 1.000 € add to watchlist

Ernest Bodmer type: MINIV - 350 (tool measurement) Serial number: 3152 ISO/50 Y2d0vum9 The HSK recording is not included. Measurements L x B x H 1250 x 900 x 1900 Tool measuring machine is fully functional. Tool measuring machine is in perfect condition. We love to hear from you.

Category: 109 other metal working machines / Measuring Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794297

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Measuring machine make MORA type 0190Fabr. -No: 16079/0888 year 02/88 for measuring rotational parts(as used to measure propellers)in 2 levels, in conjunction with a pivot point with encoderMeasuring height: 1500 mmMeasuring width: 1200 mmDistance of the pivot point from the measuring stand: 1400 mmInstallation height from the chuck to the highest position of the chuckProbe: 1260 mmChuck with inner jaws: 240 mm Drm.Space requirement with internal jaws: 2550 x 750 x 2550 mmWeight estimated approx .: 700 kgWith- Digital display with keyboard for X and Z attached to the machine- Turn-Check-Program MS-DOS Version 1.3 for measuringxa0propellers- EPSON FX 1000 printer- Calculator PEALOCK- Monitor- Measuring head RENISHAW with various buttons- technical documentsused, from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Pay ...

Category: 109 other metal working machines / Measuring Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794298

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Measuring Machine Fabr. MDM Mecatronics Type Catrim 3Machine -No: 1901192 Year 1992Measuring plate size: 1400 x 800 mmMeasuring range X: 650 mmMeasuring range Y: 470 mmMeasuring range Z: 320 mmTravel X-axis: 1000 mmTravel Y-axis: 600 mmTravel Z-axis: 400 mmDeviation to max. Travel distance: + 0.01 mmConnected load: 500 VAAir pressure 6 bar: 120 L / minTable dimensions: 950 x 1800 mmWith- Sensor setused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 109 other metal working machines / Measuring Machines
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 161555247
New in: 2014

new

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 8.335 € add to watchlist

FARO EDGE 2.7 M coordinate measuring arm was built in 2014. The efficient and productive portable measuring arm verifies the quality of workpieces of any shape by measuring components in 2D and 3D with an accuracy of ± 0.017 mm. The mounted measuring head and the non-contact laser scanning function also allow for comparative analysis of individual components and assemblies with CAD files. The machine has been designed with convenience and ease of use in mind, as evidenced by the excellent weight distribution and balance maintained. The FARO EDGE measuring machine consists of: – a 2.7 metre long measuring machine with base plate and probe, – battery and cables, – a removable handle, – a non-standard case (hard case). Applications of the FARO EDGE 2.7 M machine - measuring and verifying the dimensions of machine parts of any shape - measurement of shape deviation and c ...

Category: 109 other metal working machines / Measuring Machines
Latest update: 24.01.2024 add to watchlist
approved
dealer
item-No.: 135070405

used

check Seller: MATRACOM
Location: 70469 Stuttgart, Steiermärker Str. 48 Land-de
Price: 500 € add to watchlist

Torque/angle/preload Analyzer Testing and measuring instrument Brand: BLM Type: 5040 Number of pieces: 2 More info: Please see photos All information without guarantee

Category: 109 other metal working machines / Measuring Machines
Latest update: 24.01.2024 add to watchlist
approved
dealer
item-No.: 135070498

used

check Seller: MATRACOM
Location: 70469 Stuttgart, Steiermärker Str. 48 Land-de
Price: 1.500 € add to watchlist

Hardness tester Manufacturer: Stiefelmayer with drawer Cabinet For more info please see photos

Category: 109 other metal working machines / Measuring Machines
Latest update: 24.01.2024 add to watchlist
approved
dealer
item-No.: 135070546

used

check Seller: MATRACOM
Location: 70469 Stuttgart, Steiermärker Str. 48 Land-de
Price: 670 € add to watchlist

Roundness measuring instrument, BALLIGKEITS - & OVALITAETSMESSGERÃ?T Manufacturer: Philip Hafner with DigitameÃ?anzeige HEIDENHAIN Condition: used All information without guarantee

Category: 109 other metal working machines / Measuring Machines
Latest update: 20.09.2019 add to watchlist
approved
dealer
item-No.: 135431489

used

Location: Land-it

add to watchlist

ZEISS MC 850 X-AXIS STROKE: 850 MM Y-AXIS STROKE: 1200 MM Z-AXIS STROKE: 600 MM WEIGHT APPROSS. 3800 KG DIMENSIONS (W X H X D): 1.6 X 1.56 X 2.95 MM

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online