Category: 206 presses / Briquetting presses
Latest update: 12.12.2023 add to watchlist
approved
dealer
item-No.: 161498103

used

check Seller: Walter Hirsch Maschinenhandel
Location: 94244 Geiersthal Land-de
Price: VB 3.290 € add to watchlist

I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions!! Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The  ...

Category: 206 presses / Briquetting presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 163553557
New in: 1997

used

check Seller: Walter Hirsch Maschinenhandel
Location: 94244 Geiersthal Land-de
Price: VB 4.590 € add to watchlist

Briquette Press Briquetting Press Chip Press Pressing unit without feed auger/hopper WEIMA TYPE: TH500 Briquette diameter approx. 50 mm Hydraulic engine power 7.5 KW Pressing capacity approx. 800 Kg/h Here you bid on the complete press including control without feed screw and bunker. Machine was connected and test run, pump and cycle work perfectly. Wiring diagram is also available. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information subject to change. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packing can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.

Category: 209 other wood working machines / Shredder
Latest update: 13.12.2023 add to watchlist
approved
dealer
item-No.: 147346608

new

check Seller: WEIBERT maschinen
Location: Land-de

add to watchlist

Weima WL 4 Hackers Weima Single-shaft Shredder NEW!! Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

Category: 209 other wood working machines / Shredder
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 163244192

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 11.089 € add to watchlist

CATALOG NO. 7145 TECHNICAL DATA - loading hopper inlet 800x600mm - outlet for chipped wood, diameter 125 mm - rotor working width 580mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 40x40mm - 20x15mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1820x1220x1650mm - weight 1232kg ADVANTAGES – German production – original DTR + CE documentation – V-type rotor – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 49900 PLN Net price: 11089 EUR depending on the price 4.50 EUR Net price: 13132 USD depending on the price of 3.80 USD (Prices may vary with higher flu ...

Category: 209 other wood working machines / Shredder
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 163244195

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 13.978 € add to watchlist

CATALOG NO. 7105 TECHNICAL DATA - loading hopper inlet 800x1000mm - rotor working width 800mm - main engine 18.5kW - pump motor approximately 1.1kW - number of knives 19 pcs - knife dimensions 30x30mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 180 mm - dimensions length/width/height 2090x1360x1630mm - weight 1250kg ADVANTAGES – autoreverse – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 62900 PLN Net price: 13978 EUR depending on the price 4.50 EUR Net price: 16553 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Pla ...

Category: 503 shredders / Woodchoppers
Latest update: 26.03.2024 add to watchlist
approved
dealer
item-No.: 150501711
New in: 2022

new

Location: Land-de

add to watchlist

WEIMA shredder for carpentry-carpentry sawmill waste -old wood etc. Type:WL 4. Feeding opening: 600x1050.mm. ( Log Funer ) Rotor diameter:252.mm. Rotor width:600.mm. Drive power:18.5kW. Tools: ( Knife piece 28.) 40x40.mm. Koncav Vs9lrq Weight:1300.kg.

Category: 209 other wood working machines / Shredder
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 152337257

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 16.069 € add to watchlist

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Category: 209 other wood working machines / Wood crushing machines
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 153707353
New in: 1991

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: Land-pl
Price: 16.069 € add to watchlist

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16,069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Category: 209 other wood working machines / Wood crushing machines
Latest update: 26.03.2024 add to watchlist
approved
dealer
item-No.: 156896822
New in: 2022

new

Location: Land-de

add to watchlist

Shredding Machine Hacker Shredder Manufacturer: WEIMA-Maschinenbau Type: WL.4. Drive:18.5Kw. Feed opening:600x1050.mm. Rotor width:600.mm. double knife row (28.pcs.) Sieve size: still selectable

Category: 209 other wood working machines / Wood crushing machines
Latest update: 28.11.2023 add to watchlist
item-No.: 160250517
New in: 1999

used

Seller: StanDrew
Location: Land-pl

add to watchlist

– after technical inspection – German production – year of production 1999 TECHNICAL PARAMETERS: inlet hole 600 x 800 mm rotor diameter 175 mm rotor length 600 mm total power 18,5 kW number of knives 14 pieces rotatable cutting knives 30 mm x 30 mm sieve fi 15 and 12 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 180 mm rotor rotations 80 -120 rpm extraction connection diameter fi 200 mm dimensions (L/W/H) 200 x 120 x 120 cm weight 1200 kg

Category: 209 other wood working machines / Wood crushing machines
Latest update: 28.11.2023 add to watchlist
item-No.: 160251340

used

Seller: StanDrew
Location: Land-pl

add to watchlist

– after technical inspection – very good condition –documentation TECHNICAL PARAMETERS: infeed size 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main engine 18,5 kW number of knives 18 pieces rotatable cutting knives 40 mm x 40 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 175 mm connection diameter fi 200 mm dimensions (L/W/H) 230 / 140 / 160 cm weight 1400 kg

Category: 503 shredders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 160764821

used

check Seller: MEB Maschinenhandel GmbH
Location: Norddeutschland Land-de

add to watchlist

machine measurements: -- mm machine weight: 1.500 kg power capacity: 30 kW Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg ...

Category: 209 other wood working machines / Wood crushing machines
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 161508739

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 27.311 € add to watchlist

CATALOG NO. 6926 TECHNICAL SPECIFICATIONS - loading hopper inlet 1200x1000mm - outlet for shredded wood + viper fi 200mm - rotor working width 980mm - main motor 30kW - pump motor 0,75kW - viper motor 0,55kW - number of knives 24pcs - knife size 30x30mm - sieve 10mm, 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2470x2130x1720mm - weight about 3000kg ADVANTAGES C0fhenux8o – German production – autorewers – pressure drawer – viper – very good condition – used chipper Net price: 122900 PLN Net price: 27311EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Category: 1009 excavators
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162002729

used

Location: Land-de
Price: 490 € add to watchlist

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -execution: stable -Width: 500 mm -Height: 900 mm -Depth: 1100 mm -Admission intermediate dimension: 185 mm -Bore mounting: Ø 50 mm -ripping teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 190 kg

Category: 209 other wood working machines / Wood shredding systems
Latest update: 02.02.2024 add to watchlist
approved
dealer
item-No.: 162204022

new

check Seller: WEIBERT maschinen
Location: 63768 Hösbach - Rottenberg Land-de

add to watchlist

Weima WL 6 Hacker Hopper size / feed opening (mm): 800 x 1200 Rotor diameter (mm): 368 Rotor length (mm): 800 Rotor speed (rpm): 60 - 100 Drive power (kW): 22 / 30 / 37 Number of knives (pcs.): 23 / 42 2 row of knives Weight (Kg approx.): 2000 Suction nozzle diameter (mm): 200 Screen perforation (mm): 10 - 40 G&WE-WL6/18,5

Category: 209 other wood working machines
Latest update: 30.11.2023 add to watchlist
approved
dealer
item-No.: 162883820
New in: 1992

used

check Seller: Schreinerei Faessler
Location: 88368 Bergatreute Land-de
Price: 20.000 € add to watchlist

Single-shaft chipper with rotor width of 150 cm with 37 kw motor with hydraulic slider

Category: 209 other wood working machines / Macerators
Latest update: 07.12.2023 add to watchlist
item-No.: 162919191

used

Seller: StanDrew
Location: 83-33 Miechucino Land-pl

add to watchlist

Chipper shredder crusher WEIMA WL 15 – DTR documentation – year of production 1992 TECHNICAL PARAMETERS: main motor power 37 kW motor power from hydraulic pump 1.5 KW total power: 39.25 kW AUTOMATIC AUTOREWERS HYDRAULIC DRAWER shaft speed 90 U/min rotor length 1500 mm Multi-knife roller STUK 36 knife dimensions: 35 x 35 mm sieve fi 20 / 15 mm pressure drawer height 180 mm Viper Wood Chips Collection rotor diameter 245 mm infeed dimensions 1500 mm x 1500 mm drawer length 1000 mm dimensions (length/width/height): 270 x 240 x 280 cm weight 4000 kg

Category: 209 other wood working machines / Wood crushing machines
Latest update: 13.12.2023 add to watchlist
approved
dealer
item-No.: 162944859

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: 83-34 Sierakowice Land-pl
Price: 33.386 € add to watchlist

ORDER NO. 7188 TECHNICAL DATA - inlet width 600mm - inlet height 250mm - shaft width 600mm - shaft diameter 300mm - number of knives 32pcs - knife size 40x40mm - sieve dimensions 10mm, 12mm - toothed pulling shaft from above - shaft motor about 1.1kW - Electric autorewers - outlet for shredded wood fi 200mm, fi 300mm vibrogutter WRR 600 - vibrogutter motor power 1.8kW - vibrogutter length 3050mm - vibrogutter width 550mm - main motor 30kW - chipper dimensions length/width/height 2000x1600x1100mm - total dimensions of the vibrogutter: length/width/height 3050x700x750mm - weight 2280kg – made in Germany – used chipper, very good condition Net price: 146900 PLN Ex Tax: 33386EUR Net price calculated according to the exchange rate of 4,4 PLN/EUR (in case of major fluctuations in the exchange rate, the price may change)

Category: 503 shredders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163159404

used

check Seller: GERMANPLAST SRL
Location: ponderano Land-it

add to watchlist

WEIMA SIZE REDUCTION LINE, Including :, loading conveyor belt, construction year 2002, WEIMA WLK 6 single shaft shredder, construction year 2005, rotor width 800 mm., rotor diam. 370 mm, 45 kw drive, screen, extraction belt, magnetic drum, WEIMA GRANULATOR NZ3 10/600, soundproof cased, construction year 2005, 22 kw drive, extraction blower, pneumatic system, Big Bag filling station

Category: 209 other wood working machines / Wood crushing machines
Latest update: 02.02.2024 add to watchlist
item-No.: 163276174

used

Seller: StanDrew
Location: 83-33 Miechucino Land-pl

add to watchlist

WEIMA WL 6 I chipper Crusher from the German company WEIMA – documentation – year of production 1998 TECHNICAL PARAMETERS: filling dimension 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor speed 90 rpm V-rotor main engine 22 kW number of knives 21 pieces rotatable cutting knives 35 mm x 35 mm sieve diameter 20 mm and 15 mm AUTHOR-VERSE HYDRAULIC DRAWER pressure drawer height 175 mm connector diameter 200 mm dimensions (length/width/height) 230 / 140 / 160 cm weight 1400 kg

Category: 503 shredders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163410272
New in: 2020

used

check Seller: GERMANPLAST SRL
Location: ponderano Land-it

add to watchlist

WEIMA WLK 18 SJ SUPER JUMBO SINGLE SHAFT SHREDDER, Totally refurbished in 2020 with replacement of electric circuits + motor + rotor + board .., 219 worked hours after refurbIshing, loading hopper 1.800 x 1.880 mm., hopper capacity approx 5,4 m3, rotor width 1.800 mm, rotor diameter 482 mm, 100 rpm, 75 kw drive, weight : about 12.000 kg, installed power : 75

Category: 209 other wood working machines / Wood shredding systems
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163541485
New in: 2005

used

check Seller: Surplex GmbH
Location: Donostia-San Sebastián Land-es
Price: used machinery auction RESALE 3.600 € add to watchlist

Description: Serial Number 5007084 Chipper with 15 KW motor.  ,Rotating blades Rotor width 600 mm.  , Approx. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 1,600 mm, weight approx.: 2,000 kg

Category: 209 other wood working machines / Wood crushing machines
Latest update: 18.03.2024 add to watchlist
item-No.: 163601952

used

Seller: StanDrew
Location: 83-33 Miechucino Land-pl

add to watchlist

Chipper WEIMA WLK 6 S Crusher from the German company WEIMA – after technical inspection – year of production 2008 –documentation – NEW KNIVES TECHNICAL PARAMETERS: infeed dimensions 800 x 2100 mm rotor diameter 315 mm rotor length 800 mm rotor speed 90 rpm V-rotor main motor 37 kW number of knives 42 pieces rotatable cutting blades 40 mm x 40 mm sieve fi 12 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 275 mm diameter of the spigot fi 200 mm dimensions of the machine (length/width/height): 250 / 180 / 170 cm weight 1700 kg

Category: 212 peripheral equipment (e.g. heating, conveying, drying) / Timber crushers
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163666362
New in: 1994

used

check Seller: Schreinerei Faessler
Location: Bozen Land-it
Price: 7.000 € add to watchlist

Shredding chippers for scrap wood Low-speed with moving floor Rotor width 9th 600 mm 18.5kw motor

Category: 209 other wood working machines / Wood shredding systems
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163673287
New in: 1996

used

Location: Land-de
Price: 6.000 € add to watchlist

Crushing machine for shredding joinery and joinery waste, as well as Wood waste of many kinds Insertion dimensions: 600 x 800 mm Propulsion: 18.5 kW Photo shows the machine as returned by customer

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
WEIMA 3rd category level
 
RESALE used machinery 25 years online