used WEBOMATIC Clipping machines

Sell a used functional deep drawing machine WEBOMATIC Type ML 7000 Machine width: 560 mm Preferred: 220 mm Formats: 1.1 /2.1 / 3.1/4.1 for hard and soft foil with built-in vacuum pump with residual foil winding Side plates are all available Fun

Stainless swing top vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph

small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022

The automatic traysealer is a device used to close preformed trays with the possibility of vacuum and modified atmosphere packaging. Manufacturer: WEBOMATIC; Model: TL500; Length: 3300 mm; Width: 1000 mm; Height: 1600 mm; Weight: 1000 kg.

Vacuum sealer Webomatic duoMAT 850 large double-chamber machine, with fumigation possibility, 2x4 shelves, new lid gasket as replacement, Vacuum pump Busch 250cbm/h Year of manufacture 2015, machine size LxW approx. 213x98cm, chamber size approx. 85x64x20cm, Top maintained machine, only 1632 operating hours, very good condition

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Product number: 2833 Type: TRL 10 Serial number: 40DK112 Belt width: 540 mm Compressed air: min 3 Bar, 3 l/min. Power: 3 x 400V, 50Hz, 10kW Dimensions: 1500 x 950 x 1600 mm Weight: 415 kg

Product number: 2834 Type: STB W 60/80-E Serial number: 72GE1585 Capacity: 3 - 5 cycles/min Belt width: 540 mm Chamber: 800 x 600 mm Heating: electric, 30kW Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 36kW Dimensions: 1250 x 1050 x 1700 mm Including spare conveyor

Dozing and thermoforming high speed packing machine, capacity 3000 pcs/h; 4 cases/cycle; control PLC Mitsubishi A2; film width 320-620mm; roll diameter 450mm; top film sealable film like PA/PE; film width 300-615mm, roll diameter 400mm; with ELS labeling system; machine equipped additional with cross web-labelling system for labelling on top of the ready made package; stainless steel, never used, in original packaging; new price was 400.000 Euro ; ; The machine was never used and is in the original packaging

Webomatic Shrinking and Drying Line consisting of the Webomatic STCW 60/80-L-E Shrink Tunnel and the Webomatic DU 60-L Drying Tunnel. Webomatic STCW 60/80-L-E Shrink Tunnel: This shrink tunnel boasts unique design details, ensuring impeccable shrinking results along your production line. Specifications: Model: STCW 60/80-L-E Max. Product Dimensions: 550×300 mm Max. Product Weight: 70 kg Power: 3PH / 400V / 50Hz / 45kW Machine Dimensions (LxWxH): 1,253x886x1,442 mm Machine Weight: 500 kg Webomatic DU 60-L Drying Tunnel: The DU drying unit delicately dries shrink packs, prepping them seamlessly for subsequent stages like weighing, labeling, and cartoning. Specifications: Model: DU 60-L Max. Product Dimensions: 550×270 mm Max. Product Weight: 70 kg Drying Capacity: 11,100 m3/h Power: 3PH / 400V / 50Hz / 7kW Machine Dimensions (LxWxH): 1,600×1,253×1,442 mm Machine W ...

Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

Dislippering machine Built in 2008

Type: Automatic clipping machine DCD 6045 Electro pneumatically controlled Low air consumption Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Automatic looper Automatic string dispenser with bobbin holder Delivery time: 30 working days after payment

Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment

Manual single clipper Characteristics: Model- KN-6R Number of clips for 1 move- 1 Clip type- In, VR Diameter of casings, mm- 20 – 80 Cutting knife- Immobile Overall dimensions, mm:Length Width Height - 260*420*920 Weight, kg- 12 Weight with packaging, kg- 18

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Natural Gut / Casing Capping Machine Without nodes without clips

We sell here a double clipper from the manufacturer Polyclip, type DCD 6041, in a very good used and functional condition. Working pressure 5-7 bar, complete stainless steel, workshop tested, immediately ready for use, dimensions W/D/H 100/70/90 cm, more on request.

Automatic Double Clipper Poly Clip FCA 3442, diameter up to 75 mm, performance up to 130 cycles/min, suitable for plastic - cellulose - and collagen casings, electronic control.