962 offers

Category: 1101: power generators
New in: 2013
Price: request quote
Location: Land-us US
Seller: Brown Energy Group Inc

1720 KW Caterpillar 3516C-HD Diesel Generator set for Oil Field (2) sets Two (2) 1720 KW Caterpillar 3516C-HD Diesel Generator sets, 1200 rpm, 600 volt, 60 HZ, Year 2013, unused new surplus generator sets. The generator sets are available from a cancelled project and are stored in warehouse. The generator sets are eligible for the Caterpillar advantage warranty coverage. Contact us for more information.

Category: 505: other machinery for waste disposal and recycling
New in: 1999
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Overview technical data paper sorting line Manufacturer Bollegraaf Year of construction 1999 Throughput rate 3 up to 6 tons/h, depending on material Installation dimensions 10,000 x 19,000 x 8,000 mm (l x w x h) Sorting cabin 6,500 x 4,900 x 3,150 mm (l x w x h), 4 sorting places, 6 disposal chutes, 4 bunker belts 1 piece feeding belt to the sorting line HBT 600-800 14.006 mm ? 30° 1 piece sorting belt HBGT 800 15,000 mm ? 10° -0° 4 pieces bunker belts HBT 800 /1,000 10,940 mm Comments: The sorting line was used for sorting paper fractions, but can also be used for various other sorting operations. The machines are in good condition and can be inspected at our warehouse. Further pictur ...

Category: 1403: other storage equipment
New in: 1990
Price: request quote
Location: Land-de DE near Coburg, Bavaria
Seller: THAL BAUSATZHALLEN

Unique steel framed Storage building up for deconstruction due to land conversion. Possible future use: office building, comercial or industrial building, warehouse, retail hall, workshop and many others. STRUCTURE: The steel skeleton consists of six steel frames made of hot rolled euro profiles IPE 450 as two end wall constructions made of hot-rolled, primed steel profiles. The substructure of the mezzanine floor consists of steel beams HEB 500. The longitudinal stiffness of the Hall is achieved by bracings in the side walls. The roof substructure consists of trapezoidal sheet steel. APPROXIMATE MEASUREMENTS: covered foot print: approx. 455.25 m² (on one level); Width of the Ha ...

Category: 1406: conveyor belts
New in: 2000
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Typ HBT 600/2000 x 21,986 Year of contruction 2000 (overhauled 2017) Drive power 7,5 kW Length infeed conveyor over all 6,723 mm Length module infeed conveyor 5,500 mm Height infeed conveyor over all 1,300 mm Height side wall infeed conveyor 500 mm Length elevating conveyor over all 13,923 mm Lenght module elevating conveyor 13,300 mm Height side wall elevating conveyor 800 mm Gradient of elevating conveyor 30° Length gooseneck 1,340 mm Lenght module gooseneck 1,000 Slope of gooseneck 15° Height drive shaft over ground approx.. 5,900 mm Effective width 2,000 mm Pit dimensions 9,900 x 2,750 x 1,300 mm (l x w x h) Transport dimensions, dismantled 16,200 x 2,500 x 2,75 ...

Category: 1800: medical equipment
New in: 2005
Price: request quote
Location: Land-de DE 09599 Freiberg, Lindenallee 36
Seller: STIEHL Medizintechnik

GE revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 (ceiling hanging) 1 x detector 41cm 41cm separate X-ray Sun FA zetta. The system was tested before dismantling of our employees on site. The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. Buy the equipment in the "From stock Freiberg (EXW), Saxony, Germany, and payment in advance is". The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately. If you need help with the handling of export, we can he ...

Category: 106: presses
New in: 1961
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:63 t throat:270 mm stroke:8 - 100 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:620 x 500 mm hole in the table:200 mm table height over floor:800 mm ram surface:305 x 260 mm ram adjustment:63 mm power requirement:7,5 kW weight:4,0 t dimensions (WxDxH):1,3 x 1,7 x 2,35 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 friction clutch: overload protection in ram:mechanical

Category: 1800: medical equipment
New in: 2003
Price: request quote
Location: Land-de DE 09599 Freiberg, Lindenallee 36
Seller: STIEHL Medizintechnik

Carestream (Kodak) directly view DR 9000 with the following system components: Generator DX 80 HF company Fischer Imaging Corp. Tube you 404. FA Dunlee 0.6/1, 2_year of amnufature 2004 (ceiling hanging) 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table The system was tested before dismantling of our employees on site. It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The sales take place as "used" to resellers or distributors, despite full functional ...

Category: 106: presses
New in: 1990
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

Pressure:0100 t distance between columns:1030 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1000 x 600 mm table height over floor:910 mm side window:links 410 mm ram surface:900 x 400 mm speed down:195 mm/s speed up:205 mm/s working speed:8-35 mm/s oil volume:200 l power requirement:11,0 kW weight:4,2 t dimensions (WxDxH):2,1 x 1,5 x 3,0 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table: ram interlocking: two-hand operation: foundation pit:nicht erforderlich

Category: 1800: medical equipment
New in: 2008
Price: request quote
Location: Land-de DE 09599 Freiberg, Lindenallee 36
Seller: STIEHL Medizintechnik

Siemens Multix TOP ACSS-N with the following system components: Generator Polydoros IT base Tube Optitop 150/40/80 HC 0.6/1,0_yera of manufacture 2012 (ceiling hanging) Vertical stand Vertix TOP The system was tested before dismantling of our employees on site. The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. Buy the equipment in the "From stock Freiberg (EXW), Saxony, Germany, and payment in advance is". The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately. If you need help with the ha ...

Category: 106: presses
New in: 1989
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:040 t throat:360 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:600 mm table surface area:620 x 500 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:150 mm table height over floor:850 mm ram surface:300 x 250 mm speed down:200 mm/s speed up:200 mm/s working speed:40 mm/s power requirement:11,0 kW weight:2,8 t dimensions (WxDxH):1,1 x 1,7 x 3,0 m list price: in running function in our warehouse: German Safety: permitted only for safe tools: drawing cushion in table:hydraulisch

Category: 1800: medical equipment
New in: 2011
Price: request quote
Location: Land-de DE 09599 Freiberg, Lindenallee 36
Seller: STIEHL Medizintechnik

Siemens AXIOM aristos TX (DIGITAL) _year of manufacture 2011 with the following system components: Generator Polydoros LX 80 Tube Optitop 150/40/80 HC 0.6/1.0 Vertical stand axiom aristos 1 detector Trixell Pixium 4600 The system was tested before dismantling of our employees on site. The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. Buy the equipment in the "From stock Freiberg (EXW), Saxony, Germany, and payment in advance is". The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately. I ...

Category: 106: presses
New in: 1961
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:75 t throat:230 mm stroke:6 - 100 mm no. of strokes:105 /min distance table/ram, max. stroke up, adjustment up:354 mm table surface area:700 x 420 mm hole in the table:250 mm table height over floor:800 mm passage to the back:310 mm ram surface:264 x 270 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,6 t dimensions (WxDxH):1,2 x 1,6 x 2,3 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 friction clutch: two-hand and foot operation:

Category: 103: milling machines
New in: 2001
Price: request quote
Location: Land-it IT 23801 Calolziocorte, via serta 23
Seller: Industrialbay

Year 2001 Numerical control FANUC 18 MB 600x600x630 mm races Tables 500 × 500 mm Max workable piece dia. 670xh750 mm Load 500 kg spindle at 13,000 rpm Power 18.5 / 22 kw Warehouse 60 seats BT 40 Fast up to 50 m / min Screws perforated and liquid-cooled Acceleration 0.7 g High-pressure coolant through the center spindle 18 bar chip conveyor Probe piece MARPOSS remoted Flyer Ground dimensions 5,600 × 2,300 × 2,875 mm Weight 9,600 kg

Category: 106: presses
New in: 1973
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:125 t throat:440 mm stroke:20 - 120 mm no. of strokes:44 / 66 /min distance table/ram, max. stroke up, adjustment up:460 mm table surface area:1030 x 730 mm hole in the table:395 mm table height over floor:790 mm passage to the back:440 mm ram surface:800 x 500 mm ram adjustment:100 mm power requirement: kW weight:10,2 t dimensions (WxDxH):1,4 x 2,6 x 3,1 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 friction clutch: overload protection in ram:mechanical ram counterbalance:pneumatic two hand control buttons:

Category: 1406: conveyor belts
New in: used
Price: 2.690 €
Location: Land-de DE 97076 Würzburg, Gattingerstraße 11C
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

Belt curve conveyor belt curve 90 ° right TRANS standard Technical details: Manufacturer: Transnorm Type: belt curve 45° right inside pulling Year of construction: 2012 Angle: 90 ° Project: V169004 Position: 11.050 ID no.: 0 0406468 Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Outer width: 750 mm Guide on both sides, height 100 mm installed power: 0.37 kW constant conveyor speed: v = 0.5 m/sec. Without support. Optional columns: 3 supports a' â?¬ 69.00 Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 1500 x 1400 x 500 mm Weight (gross): 110 kg

Category: 101: boring mills and machining centers
New in: new
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

x-travel:760 mm y-travel:820 mm z-travel:560 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125 mm max. tool weight:8 kg max. tool diameter:80 mm weight of the machine ca.: t Machine size (LxWxH):2200x4000x3415 mm fully enclosed: : coolant system: rigid tapping: CE-design: high speed directl spindle mot ...

Category: 1505: heavy trucks
New in: 1997
Price: 33.000 €
Location: Land-de DE 33378 Rheda-Wiedenbrück, Röntgenstr. 15
Seller: Andruszko GmbH

Technical data Category Front stacker Vehicle number 2-2018-8-1997-KA12000D-P availability In 1 day after order Hours. 14.842 hours Fuel type Diesel Gear Automatic Year of build 1997 Overall height 3,770 mm Load-bearing capacity 12,000 kg Lifting height 5,000 mm Facilities Cabin Protection roof Power steering Rental possible Vehicle description Vehicle data: Make: KALMAR Site 33378 Rheda-Wiedenbrück Type: DCD 12-1200 Load Centre 1200 mm Drive type: Diesel Load capacity: 12000 kg Lifting height: 5000 mm Year of construction: 1997 Hours of operation: 14842 Engine: Volvo Transmission: Dana Mast data: Mast type: Duplex with side shift + fork positio ...

Category: 101: boring mills and machining centers
New in: 2017
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

x-travel:1050 mm y-travel:600 mm z-travel:530 mm table-size:1100x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:8000 1/min spindle taper:40 BT spindle drive:15 kW positioning accuracy: mm repeating accuracy: mm Tool changer:24 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the machine ca.:7,1 t signal lamp: halogen lamp: coolant system: chip conveyor with chip bucket: water gun: rigid tapping: automatic tool changer:24 fach foundation: CE-design: Metric, 400V 50Hz 3  ...

Category: 1406: conveyor belts
New in: used
Price: 2.150 €
Location: Land-de DE 97076 Würzburg, Gattingerstraße 11C
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

Belt curve conveyor belt curve 45° right Transnorm TS1500-80 Second-hand machine Technical details: Manufacturer: Transnorm Type: belt curve 45° right outside pulling Year of construction: 2012 Angle: 45° Project: V169004 Position: 11.070 ID no.: 0 0406470 Direction: Right NennradiusRN: 600 mm BN width: 600 mm Outer width: 750 mm Guide on both sides, height 100 mm installed power: 0.37 kW constant conveyor speed: v = 0.5 m/sec. Without support. Optional columns: a' â?¬ 69.00 Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 1005 x 850 x 500 mm Weight (gross): 60 kg

Category: 101: boring mills and machining centers
New in: 2018
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

x-travel:1020 mm y-travel:510 mm z-travel:600 mm table-size:1070x510 mm T-slots:18x5 (Breite x Anz.) mm max. table load:500 kg distance spindle center to table:100-700 mm rapid traverse in x-y-z axis:36/36/36 mm milling feed range:1-12.000 mm/min spindle speed:10.000 (direkt) 1/min spindle taper:40 BBT spindle drive:14.6 kw positioning accuracy: mm repeating accuracy: mm Tool changer:24 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the machine ca.:7,1 t CNC controller:SIEMENS 828D (10.4\" LCD+SHOPMILL) halogen lamp: coolant system:mit 320l Tank chip conveyor with chip bucket: water gun: rigid tapping: automatic ...

Category: 1403: other storage equipment
New in: used
Price: request quote
Location: Land-de DE 14129 BERLIN
Seller: THAL BAUSATZHALLEN

Insulated steel framed Hall with the footprint of approx. 574 square meters (28.7m Length; 20 meters) destined for immediate deconstruction. In its second life cycle, this prefabricated steel building could serve as agricultural machine shop, workshop, warehouse and many more. APPROXIMATE DIMENSIONS: Hall length: 28.70 metres; Width of the Hall: 20.00 m; Eave height: 7.00 m; Ridge hight: 7.70 m; STRUCTURAL STEEL WORK: pre engineered, prefabricated gabled roof frame made of hot-rolled, primed / coated euro profiles. The longitudinal stiffness of the Hall by diagonal bracings in the roof level and diagonal bracings in the side walls. ROOFING: trapezoidal steel sheet wit ...

Category: 102: lathes
New in: new
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

turning diameter:50 mm turning length:40 mm control:Fanuc Oi-TF (8,4 \'\' LCD-Monitor) greates pass round over bed:230 mm Bar capacity:26 mm chuck:100 mm (pneumatisch) mm spindle speeds:6000 1/min spindle nose:A2-4 spindle drive:3.7/5.5 KW (Fanuc ?3/10000i) spindle bearing diameter:70 mm rapid power traverse in X-and Z direction:30 m/min travel -x axis:220 mm travel - z:220 mm Machine size (LxWxH):1370x1630x1750 mm hydraulic motor:0,75 kW hydraulic pump:30 L/min coolant system:100 L 3-jaw hydraulic chuck: heat exchanger for electr. cabinet: fully enclosed: CE-design: transformator: chip conveyor with chip bucket: tool holder:innen, außen, Bohrhülse etc. soft jaw:1 Satz part catcher: bar fe ...

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-uk UK London
Seller: PostIndustry

This listing is for a set of mobile industrial, heavy duty, warehouse safety stairs, easy wheeling and locking system, height 175cm, 7 treads

Category: 101: boring mills and machining centers
New in: new
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

x-travel:850 mm y-travel:600 mm z-travel:530 mm table-size:950x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:8000 1/min spindle taper:40 BT spindle drive:15 kW positioning accuracy: mm repeating accuracy: mm Tool changer:24 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2870x2200x2810 mm weight of the machine ca.:6,3 t CNC controller:Fanuc 0i MD + MANUAL GUIDE i FUNCTION + 10.4\" LCD MONITOR signal lamp: halogen lamp: coolant system: chip conveyor with chip bucket: water gun: rigid tapping: au ...

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-uk UK London
Seller: PostIndustry

This listing is for a set of mobile industrial, heavy duty, warehouse safety stairs, easy wheeling and locking system, height 175cm, 7 treads

Category: 106: presses
New in: 1989
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:160 t stroke:30 - 100 mm no. of strokes:30 - 180 Hub/min distance between columns:2340 mm Width between oil collecting pans:2000 mm distance table/ram, max. stroke up, adjustment up:600 mm Table area:2280 x 1200 mm hole in the table:1600 x 300 mm table height over floor:1020 mm side window:800/700 mm ram surface:2000 x 1000 mm ram adjustment:100 mm power requirement:60,0 kW weight:34,0 t Dimensions (WxDxH): m list price: in running function in our warehouse: list price: with new electrical cabinet:Siemens S 7 overload protection in ram:hydraulic WITHOUT feeder:can be offered optionally

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-uk UK London
Seller: PostIndustry

This listing is for a set of mobile industrial, heavy duty, warehouse safety stairs, easy wheeling and locking system, height 150cm, 6 treads

Category: 106: presses
New in: 1992
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:40 t throat:280 mm stroke:8 - 90 mm Stroke rate:130 / min Distance table/ram, max. stroke up, adjustment up:385 mm Table surface area:630 x 480 mm Hole in the table:170 mm Table height above floor:800 mm Passage to the back:350 mm Ram surface:460 x 300 mm Ram adjustment:56 mm Power capacity:4,0 kW Weight:4,5 t Dimensions (WxDxH):0,9 x 1,6 x 2,8 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical two hand control buttons:

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-uk UK London
Seller: PostIndustry

This listing is for a set of mobile industrial, heavy duty, warehouse safety stairs, easy wheeling and locking system, height 175cm, 7 treads

Category: 106: presses
New in: 1986
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:006,3 t throat:210 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:380 x 350 mm hole in the table:100 mm table height over floor:1050 mm ram surface:45 mm speed down: mm/s speed up: mm/s working speed: mm/s oil volume: l power requirement:4,0 kW weight:0,8 t dimensions (WxDxH):0,8 x 1,2 x 2,6 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 conrollable dependant on pressure/time and way: two-hand operation:

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-uk UK London
Seller: PostIndustry

This listing is for a set of mobile industrial, heavy duty, warehouse safety stairs, easy wheeling and locking system, height 125cm, 5 treads

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVarious second hand conveyors Krones/KHS/Gebo for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 370 m used bottle conveyors (Available immediately) \n \nWhen buying items we always pay attention on famous manufacturers an tough quality \n \n \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! \r\nOr do you want to sell or market y ...

Category: 209: other wood working machines
New in: 2011
Price: 2.800 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Iseli type FL, sharpening machine for hand tools Especially for chisels, chisel, plane irons, blades, etc. Gratloser dry sanding with sanding base possible (four piece included) Sharpening strength can be easily adjusted via hand wheel with the Swivel Head Additional tool grinding wheel with adjustable support Three-phase 400V, 0, 55kW RPM 2700 RPM CE mark Operating instructions Machine is obviously not much went in very well-kept condition, A video of the current machine can be sent on request. The disc and the tool grinding wheel was refurbished, the machine can be immediately used. Without the pictured paring and skateboard Please the PDF file with our terms and condit ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVarious second hand palett-conveyors Krones/KHS Schäfer for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 220m used palett- conveyors (predominantly Krones,KHS, and Schäfer). \n \nWhen buying items we always pay attention on famous manufacturers an tough quality . \n \n \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! \r\nOr  ...

Category: 301: injection moulding machines
New in: 2005
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

warehouse no.: 502645 manufacturer: ENGEL Typ: ES 2550-400 HL year of construction: 2005 clamping force: 4000 kN size of mould plates h: 1300 mm size of mould plates v: 910 mm min. mould height: 350 mm max. open daylight: 1300 mm opening stroke: 950 mm screw diameter: 70 mm swept volume: 1193 ccm injection pressure: 1820 bar equipment included ? core pulling hydraulically 1x ? machine incl. belt conveyor ? CEE-socket 16A ? machine incl. water flow regulator ? machine with material hopper ? air valve 1x ? interface for handling ? Schuko-socket 10A ? Anti vibration mounts ? machine without hopper loader ? machine incl. safety fencing ? m ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nUsed Pallet infeed and outfeed for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 14 pallet infeed and outfeed (predominantly Krones,KHS, and Gebo, available immediately). \n \nWhen buying items we always pay attention on famous manufacturers an tough quality. \n \nUsed Pallet infeed and outfeed for sale \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we sup ...

Category: 201: saws
New in: 1998
Price: 10.700 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Small "Joinery machine" for the woodworking, carpentry, wood construction, etc. Consisting of Makita 5500 S Graule ZS 200NF, 1998 and pivot cutter Graule ZS200NF Can be rotated and tilted, so also for miter cuts Motor 400Volt, 3kW, (5kW S6 40% ED) with automatic motor brake and a star - Delta starting Blade 520 mm, WZ Z60 for wood, still very good and freshly sharpened Wheel with hand crank, left to approx. 65deg right to 45deg Adjustable positive stops for - 45, 0 and + 45 degrees Cutting height 200 mm, (140 mm at 45 degrees) Cutting length 420 mm, (295 at 45 degrees) Carriage aligns with laser mark Dust nozzle 100 mm Integrated runway left and right approx. 1, 5 m ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVarious second hand pallet-turning-stations Krones/KHS/ Schäfer for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 24 used pallet-turning-stations (predominantly Krones,KHS, and Schäfer, available immediately). \n \nWhen buying items we always pay attention on famous manufacturers an tough quality. \n \n \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we s ...

Category: 201: saws
New in: used
Price: 4.200 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Cone cutter Makita 5500 S chassis swivel for attachment to Graule ZS 200 NF A video of the current machine can be sent on request. Drive motor 230V / 1420W, this good for the construction site 4 blades, 2 longitudinal cutting blades 235 mm, 2 cross saw 180 mm Clamping width 200 mm Maximum dimensions of the shaft about: 130 x 240 x 240mm (Wxlxh) Easily adjustable pin strength The PIN cutter was really very professional rebuilt, the aggregate is swivelled from 0 to 45 degrees with rest areas at 0, 15, 22.5, 30 and 45 degrees and suitable also for helical cone. During the reconstruction, obviously also a place the saw blade width shift was repaired and reinforced with an aluminium m ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nUsed Glideliner for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx.6 used glideliners; from 15.000 bottles/h up to 45.000 bottles/h, available immediately \n \n \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! \r\nOr do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. \r\nAsk  ...

Category: 201: saws
New in: 1998
Price: 7.200 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Saw for woodworking, carpentry, wood construction, etc. Rotatable and Tiltable, so also for miter cuts Motor 400Volt, 3kW, (5kW S6 40% ED) with automatic motor brake and a star - Delta starting Blade 520 mm, WZ Z60 for wood, still very good and freshly sharpened Wheel with hand crank, left to approx. 65deg right to 45deg Adjustable positive stops for - 45, 0 and + 45 degrees Cutting height 200 mm, (140 mm at 45 degrees) Cutting length 420 mm, (295 at 45 degrees) Carriage aligns with laser mark Dust nozzle 100 mm Integrated runway left and right approx. 1, 5 m Trolley with 4 wheels, of which 2 lockable Working height approx. 810 mm Emergency stop button partially repainted Re ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVarious second hand tray- and carton conveyors Krones/KHS/Gebo for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 140m used Tray-and carton conveyors (predominantly Krones,KHS, and Gebo, available immediately). \n \nWhen buying items we always pay attention on famous manufacturers an tough quality. \n \n \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we sup ...

Category: 1403: other storage equipment
New in: 1998
Price: 39.500 €
Location: Land-de DE Sigmaringen
Seller: Alexander von Westernhagen

2-storey warehouse stage (Gallery, stock level), 500 kg / m2, approx. 542 m 2 per level, total 1.084 m 2 - used -: Price from site: â?¬39.500.-(net), plus dismantling etc.! Manufacturer B & W - shelves J. Schärer, 01982 GroÃ?räschen Year of construction: 1998, self-supporting Length: 54,05 m Width: 10.03 m Level 1st floor 542 m2 Level 2nd floor 542 m2 Total space on the Plains: 1084 m2 Weight / m ² 508 kg / m ² (safety factor of 1.5) Height bottom 3 m and 6.3 m Height of the upper edge of the 3.3 and 6.6 m Steel makers double I-beam 300x150mm, 52 units per floor (104 total) Distance from beam to beam 1,050 mm C-profile 300 x 10 ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVarious second hand full-crate-Inspections (Krones / KHS/ Gebo) for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 5 used full crate inspectors (predominantly Krones,KHS, and Gebo). \n \nWhen buying items we always pay attention on famous manufacturers an tough quality. \n \n \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! \r\n ...

Category: 209: other wood working machines
New in: used
Price: 540 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Two fully stocked tool cabinets made of wood Properly filled tool boxes. E.g. hand tools, files, chisel, planing, water truck, screwdriver, hammers, angle, saws, pliers, pipe wrench, wrench, drill bit sets, hex wrench, dust masks, tapes, Ratchet boxes, sandpaper, screws, nails and another Tools and Assembly materials Mobile per 4 casters, identified two of them each Dimensions of a trolley approx. 770 x 470 x 1000mm (Lxwxh) The price is for both cars. Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVarious second hand Krones/KHS/Schäfer pallet-centering/pallet control units for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 14 used pallet-centering/pallet control units (predominantly Krones and KHS, available immediately). \n \nWhen buying items we always pay attention on famous manufacturers an tough quality. \n \npallet-centering/pallet control units \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete  ...

Category: 207: gluespreader machines
New in: 1999
Price: 4.500 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Formteikantenanleimmaschine IMA PCA stating direct glue glue basin A video of the current machine can be sent on request. Built no cheap edges moped, but industrial-grade by IMA for continuous use. This model was built by Brandt also referred to as KTD 82 H and KTD 820. For hot melt adhesives and PU adhesive, 140-220 ° c. Inner radii are dependent on the bending capacity of the edge material from approx. 150 mm, external RADIUS. Adjustable heater for heating of the material of edges with narrow radii. Edge thickness of 0,4-3, 0 mm Edge height approx. 20-50 mm Supply 400V/2, 6kW Operating instructions CE mark Very good condition The machine is used for the gluing  ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVaroius second hand pallet/crate/tray/bottle conveyors Krones/KHS/Geboo and Schäfer for sale. \n \nIn our warehouse in Knetzgau, one of the biggest in Europe, we currently have stored on 2.200 qm approx. 2 km used pallet/crate/tray/bottle conveyors. \n \nWhen buying items we always pay attention on famous manufacturers an tough quality (predominantly Krones,KHS/ Gebo and Schäfer). \n \npallet/crate/tray/bottle conveyors \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a fi ...

Category: 1403: other storage equipment
New in: 1997
Price: request quote
Location: Land-de DE Darmstadt
Seller: Alexander von Westernhagen

High-bay warehouse for Corlettenlagerung, also effective for the storage of pallets - used-: Price on request! Selling without the pictured Corletten! Manufacturer: Polypal Type: Stockpal Year of construction: 1997 Field capacity: 6.4 to or to 8. Load capacity: 2,069 kg Buckling length: 2.990 mm Frame height: approx. 11, 50 m Frame depth: 74 cm approx. 2 single rows 10 rows of double mesh = approx. 311 fields approx. 331 frames approx. 3000 bars Traverse length: 4, 30 m Beam height: approx. 13 cm Spacers between the rows of double: approx. 60 cm A double row depth: approx. 2, 12 m In a double row is due to post of the Hall of spacers: 1, 20 m The first fields ar ...

Category: 706: beverage machines
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nVarious scond hand crate conveyors Krones/ KHS/ Gebo for sale \n \nIn our warehouse in Knetzgau we currently have stored on 2.200qm approx. 440m used case conveyors (predominantly Krones,KHS, and Gebo). Available immediately. \n \nWhen buying items we always pay attention on famous manufacturers an tough quality . \n \n \n \n\r \nBesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. \r\nYou have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every ph ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)