We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Approx. Onsite Dimension. (l x w x h): 800 x 900 x 1,400 mm, weight approx.: 200 kg
used
Cooling Tower - Spiral Tower
used
Min size 10x10 mm Max size 260 x 280 mm Banding device In/line Busch BD30 Automatic banding device Min banding sizes 25 x 60 mm Max banding size 140 x 200 mm Speed 14 cycles per minute - 840.000 sheets per hour Banding width 20/30/40 mm Banding materials PE-foil Details operated by light curtain, once the operator pulls away their hands the machine will make a cycle, PLC diagnostics display readout for BD30 condition excellent !! Unit BD30 all pneumatic revised until leak free!! after order a few more things will be performed Available failry soon after order
used
Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm
used
Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg
Ladies and gentlemen, we can offer you pre-produced components for roads on request in order to build short-term system roads. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling, loading and transport is carri ...
Baltimore evaporating condensors From 750 to 2000KW
Type: From 500 to 1500KW
used
used plants - full, used plants - EBAWE, used plants - SUMMER, used plants - WECKENMANN,
used
Make: Carrier Type: QUIETIS WPH31A 400/3/50 Refrigerant: R404A Built: 2013 Price on request
new
Tischgroess: 940 x 640 mm height: 800 mm flow rate maximum: 2500 m³/h power: 0.35 kW (0.5 HP) voltage: 230 V / 50 Hz weight: 95 kg
new
Air power: 2520 m ³/h filter surface: 1,45 m² maximum vacuum: 1800 PA suction connection Ø: 1 x 130 / 2 x 100 mm chip bag contents: 300 l Leerlaufdrehzah: 2950 RPM sound pressure: 87.1 dB S1 motor power output 100%: 1.5 kW (2.0 HP) engine power S6 40%: 2.1 (2.8 kW) voltage: 400 V / 50 Hz machine dimensions (W x D x H): 860 x 670 x 2330 mm weight approx.: 40 kg
used
Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage Price on request
used
Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage with switch box Price on request
used
Make: FRIGOPOL Type: RHLL/Hr0017 Compressor types: 2x30L-DLYB-7.5 7.5HP Electrical power 1x14L-DLYB-4.5 4.5HP Electrical Power Refrigerant: R404A Cooling capacity Total: 42 to 50kW at -10C Electrical power 18.8kW Volume flow: 74m3/h Price on request
used
The aspirator Wetzikon weather is 3 pieces in good condition, ready to use. It consists of intact plants, which have operated until now following machines: CNC machine Striebig vertical panel saw Planing machines Wide-belt sander Table circular saw Edge glue machine Moulding machine The exhaust system consists of 3 installations: 1 system with filter and 2 bag system 2 + 3 system with wooden box below and filter system various pipes and branches, 1 fan 3 HP, 1 fan 2 HP etc. Weight 350 kg Built in 1975 Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Refurbished replacement engine Lombardini LDW1404. Hull version without starters, Lima, flywheel, intake manifold, oil pan Warranty: 12 months MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de
new
From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...
used
Make: Linde Type: VPM 505-4090 Refrigerant: R404A Built: 2005 Minus cooling Compressor 4pcs: 4pcs: Make: BITZER Type: 6F-40.2Y-40P Conveyor volume: 151.6 m3/h + 1pcs: Make: BITZER Type: 6FE-44Y-40P Funding volume: 152 m3/h Has been replaced, i.e. New Price on request
Slow runner with sliding floor Rotor width 800 mm 18.5 kw motor
new
Suction capacity: 2900 m3/h Engine power: 1,1 KW, 400V, 50 Hz, S1-chip bag contents: 200 l Connection: 1x140mm WJ-ASA-7