458 offers motorized plate bending machines WMW

found in all categories

Category: 107 sheet metal working
approved
dealer
New in: 1970
Location: Land-de DE
Seller: ZOMA Maschinenhandel

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

Category: 104 grinding machines
New in: 1977
Price used machinery auction RESALE 8.000 €
Location: Land-de DE
Seller: Surplex GmbH

Weight approx.: 3200 kg workpiece diameter: 50 - 260 mm workpiece length: 710 mm grinding length: 400 mm Dimensions (l x w x h) approx.: 2700 x 1100 x 1600 mm grinding wheel diameter max.: 315 mm grinding spindle speed: 650 - 1900 Rpm total power requirement: 5,6 kW Description: grinding dia.: 50 - 260 mm modul: 1-20 mm helical angle: max. +/- 30 ° clamping slot depth: max. 60 mm T-slot pitch: 220-1050 mm max. stroke of grinding wheel: 560 mm grinding wheel dia.: 220 - 315 mm grinding wheel speed: 8-32 m/sec taper in workpiece headstock: MK 5 max. workpiece weight: 80 kg voltage: 220/380V 50Hz V With the machine can be sharpened hobs up to module 20mm and diameter 260mm with lenght up to ...

Category: 103 milling machines
approved
dealer
New in: 1982
Location: Land-de DE
Seller: ZOMA Maschinenhandel

Universal tool-feeding machine, used Fabr. WMW Auerbach Type FUW 250/IV Built in 1982 Laengsmotion/ longit. move: X 400 mm Horizontal movement/ horiz. Move: Y 220 mm Vertical movement m. mech. Feed/ Vert. move mech. feed: Z 400 mm Tool holder/taper: ISO 40 Pinole stroke/ move of sleeve: 80 mm Pre-shot stepless all axes X, Y and Z/ feeds all axis 6.3 - 1250 mm/min Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 45 - 2240 rpm. Table size/ table: 630 x 350 mm Drive power 7 kW Outdoor mass/ dimensions 1400 x 1600 x 1800 mm Weight: approx. 1450 kg

Category: 109 other metal working machines
approved
dealer
New in: used
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Spiral drill, Drill bits, twist drills, drills -Spiral drills on request different sizes -different producers -Price 10 - 30 mm 0,50 EUR / mm (drill 20 mm = 10 EUR net) -Price 31 - 45 mm 1 EUR / mm (drill 35 mm = 35 EUR net) -Price 46 - 80 mm 1,60 EUR / mm (drill 50 mm = 80 EUR net) -Zweischneider -Diameter 10-80 mm -different lengths -Recordings MK1 - MK6 -Type HSS

Category: 106 presses
approved
dealer
New in: 1967
Location: Land-de DE
Seller: ZOMA Maschinenhandel

ydraulic stand press, used hydraulic gap type press , used Type: PYE 100 Built / new in: 1967 Manufacturer / make: WEMA Pressing force / rated pressure: 100 t Table size / table size: 710 x 500 mm Table hole/ hole in table: 200 mm Impact running surface / slide surface: 355 x 355 mm Extension / depth of gap: 355 mm Mounting height / height of table: 630 mm Max piston stroke / max. piston stroke: max. 500 mm Pressure piston diameter / diam. of piston: 210 mm Pushing speed downwards/upwards Downward/ upward speed of slide: 43 mm/sec// 112 mm/sec Weight: 3.6 t Connection value / connected load: 8 kW

Category: 110 accessories for machine tools
approved
dealer
New in: 1968
Location: Land-de DE
Seller: Peter Jüttermann Werkzeugmaschinen

manual for lathe WMW Niles DLZ 500/630/800 IV L (175 pages)

Category: 104 grinding machines
approved
dealer
New in: 1988
Location: Land-de DE
Seller: Alfred Feldmann Werkzeugmaschinen

- Grinding length: 2000 mm - Grinding width: 800 mm - Table size: 2600 x 800 mm - Magnetic table: 1000 x 800 (2 x 400) mm - Workpiece height: 815 mm - Grinding wheel dimension: 630 x 125 x 305 mm - automatic delivery - Wet grinding device - Magnetic separator - Total power: 48 kW - Machine weight: 11000 kg - Room requirements (W x D x H): 5.0 x 2.0 x 3.5 m Details horizontal flat grinding machine, grinding height with new grinding wheel 710 mm, max. grinding height with smallest grinding wheel 815 mm, automatic delivery, 2 magnetic plates of 1000 x 400 mm, grinding wheel with flange, pull-off device, wet grinding device with Magnetic separator, electrics were renewed in 1997  ...

Category: 104 grinding machines
approved
dealer
New in: 1985
Location: Country-DE Germany, 72555 Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

grinding diameter max.: 100 mm regulating wheel width: 127 mm max. width of grinding wheel: 305 mm Control: NUM CNC 1020 total power requirement: 25 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m W M W - MIKROSA Centreless Grinder with Thru-Feed Grinding Device Model SASL 125 / 1 A Year approx. 1985 / in 2000 modernized S/Nr. 16.46-70-57 _____________________________________________________________ Grinding Ã? regular/maximal 2 â?? 80/120 mm Max. length of workpiece for Thru-Feed-grinding 350 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ã? x width 600 x 250 x 305 mm Regulating wh ...

Category: 102 lathes
approved
dealer
New in: used
Location: Land-pl PL
Seller: Blachmix

• Max workpiece diameter 2500 mm, • Max workpiece height 1250 mm, • Max workpiece weight 10000 kg, • Faceplate diameter 2240 mm, • Faceplate speeds range 1-50 rpm, • Main motor power 55 kW, • Weight 37900 kg

Category: 106 presses
approved
dealer
New in: 1964
Location: Land-de DE
Seller: Surplex GmbH

Weight approx.: 1000 kg stroke: 400 mm Dimensions (l x w x h) approx.: 700 x 1200 x 2200 mm table surface area l x w : 400 x 450 mm Description: pressure: 10 t distance between columns: 630 mm working pressure: 125 ATÃ? speed down: 0,1 m/sec speed up: 0,4 m/sec voltage/frequency: 380 V / 50 Hz total power requirement: 4,5 kW

Category: 106 presses
New in: 1980
Location: Land-sk SK
Seller: ALM Trade Sro

Force capacity: 500 tn Size of table: 1000 x 1400 mm Slide stroke: 400 mm Strokes per minute: 12 Slide adjastment : 220 mm Weight of machine: 43 tn

Category: 103 milling machines
approved
dealer
New in: used
Price 1.150 €
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Universal milling head, milling fixture, milling extension, angle milling head -Spare part of a WMW HECKERT milling machine -1 piece angle milling head -Recording output SK50 -Recording input gear -completely swiveling -Rezes recording mm -Hole circle mm -Transport Dimensions 750/600 / H530 mm -Weight 296 kg

Category: 106 presses
New in: 1970
Price 15.000 €
Location: Land-de DE
Seller: DWZT GmbH

Presskraft 160 ton Exoffload: 360 mm Enfrant table/pestle: max. 800 mm Stö�elhub: 500 mm Table size: 900 x 620 mm

Category: 102 lathes
New in: used
Price 3.500 €
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

: 355 mm : 2.000 mm : 36 mm : 5,5 kW : 200 mm : 380 mm : 3.400 mm : 1.100 mm : 1.300 mm : 2.450 kg without bridge 3 jaws chuck chuck cover 4-fold tool holder steady rest rolling centre no users manual Does not comply with the present industrial safety regulation swing over bed: 355 mm turning length: 2.000 mm spindlebore: 36 mm revs: 18-2.500 (18) motor: 5,5 kW jaw chuck: 200 mm bed width: 380 mm length: 3.400 mm width: 1.100 mm height: 1.300 mm weight: 2.450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 104 grinding machines
New in: 1979
Location: Land-de DE
Seller: Müller Kabeltechnik GmbH

Circle saw sharp grinder SWSK 315 Manufacturer Koenigsee Tool Factory (WERKOE) Sawdust diameter 16 to 315 mm Lifting number of grinding sliding 90-135-200 Hub/min Abrasive body diameter 160 mm Grinding spindle speed 2800 and 5200 u/min Condition used, functional

Category: 102 lathes
approved
dealer
New in: 1962
Location: Country-de Germany, 46342 Velen-Ramsdorf
Seller: WMT GmbH & Co. KG

turning diameter over bed: 630 mm turning diameter over slide rest: 380 mm turning length: 5000 mm centre height: 315 mm spindle bore: 70 mm tailstock quill taper MT: MK 5 turning speeds: 18 - 900 U/min power capacity: 14 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 7,0 x 1.5 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 104 grinding machines
approved
dealer
New in: used
Location: Land-de DE
Seller: ZOMA Maschinenhandel

High-performance vertical flat grinder with magnetic table, outdated High duty-vertical surface grinder with magnet table, overhauled Type/type: SFS 630/2 Manufacturer/make: WMW Building year in: 1987/2015 Grinding width: 630 mm Grinding/grinding length: 2000 mm Grinding courh/grinding height: 800 mm Table load without magnetic/ max. weight of work (without magnetic table): 2000 kg Table shop. x-axis/table speed: 2 .. 30 m/min; Hydraulic continuously (infinitely Variable) Table Hub/stroke of table: 0.001 ... 9.999 mm Verccht-Eilgang/vertical speed movement: 0.315 m/min Vertical creep/ Third creeping movement: 0 ... 0.315 m/ ...

Category: 104 grinding machines
approved
dealer
New in: 2015
Location: Country-de Germany, 40233 Düsseldorf
Seller: Knops Werkzeugmaschinen

internal diameter: 8-30 mm grinding depth: 60-80 mm swing diameter: - mm Control: Siemens 840 D peripheral speed: 60 m/sec total power requirement: 50 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m 3-axis CNC controlled internal grinding machine with 3-axis loading and unloading system. The machine can be viewed under power. Exemption reason: company closure Operating hours 1257 Technical data and equipment: CNC control Siemens 840 D 3NC controlled axes (X, Z, C) Circulating shuttle system with handling device, loading / unloading device, Swivel dresser with turbo dressing spindle Coolant plant with magnetic separator and paper belt filter Hydraulic power unit Electroni ...

Category: 102 lathes
approved
dealer
New in: 1987
Location: Land-de DE
Seller: SWH-GMBH

Curve-controlled multi-spindle turning machine Number of rotary spindles: 6 Largest rod diameter: Round material: 32 mm Six-edge material: 27 mm Square material: 28 mm Largest bar length: 4000 mm Largest turning length: 105 mm Largest main sleigh hub: 135 mm Fabr. # 0250002-12 Series: 0250002 Weight: 10.2 to. More data on request

Category: 109 other metal working machines
approved
dealer
New in: 1957
Location: Land-de DE
Seller: Helmut Steinfels GmbH & Co. KG

diameter range 6 mm shaft length under head 40 mm max. cutting length 50 mm output- piece/min 120

Category: 109 other metal working machines
New in: 1980
Location: Land-pl PL
Seller: Delivery Tools

630 KN

Category: 109 other metal working machines
approved
dealer
New in: 1976
Location: Land-de DE
Seller: Helmut Steinfels GmbH & Co. KG

diameter range 2-6,3 mm cutting length 3.000 mm speed - meters/min 22-71

Category: 112 gear cutting and hobbing machines
New in: used
Location: Land-pl PL
Seller: Delivery Tools

in working condiiton

Category: 109 other metal working machines
approved
dealer
New in: 1960
Location: Land-de DE
Seller: Helmut Steinfels GmbH & Co. KG

diameter range 2-4 mm shaft length under head 40 mm max. cutting length 50 mm output- piece/min 120

Category: 106 presses
approved
dealer
New in: 1985
Location: Land-nl NL
Seller: Voortman Machines

ECCENTRIC PRESS WITH PNEUM. CLUTCH St. no. : 7864 Make : WMW Type : PED 63/2 Machine no. : 008 – 010/12 Capacity : 63 Ton Table dimensions : 800 x 600 mm Ram dimensions : 500 x 400 mm Shut height max. : 560 mm Throat : 315 mm Passage in frame : 310 mm Passage hole in table : Ø 270 mm Stroke : 16 - 125 mm Ram adjustment : 70 mm Continue stroke unloaded : 80 min-¹ Motor power : 5,5 kW Connection power : 6,0 kW Dimensions machine WxDxH : 2,0 x 1,5 x 2,8 m Weight machine ca. : 5.500 kg Control : 2-hands / feed Machine is equipped with; - Continuous stroke – single stroke and adjustable table

Category: 101 boring mills and machining centers
approved
dealer
New in: 1989
Location: Country-DE Germany, 51149 Köln
Seller: AS Maschinenhandel

spindle diameter: 130 mm x-travel: 2235 mm y-travel: 2020 mm z-travel: 2345 mm w-axis: 900 mm U-axis: 320 mm b-axis: 360 ° Control: Heidenhain TNC 155 4-Achs table-size: 180 x 2000 mm table load: 8 t spindle turning speed range: 5-1000 U/min engine output: 45 kW total power requirement: kW weight of the machine ca.: 34 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
approved
dealer
New in: 1989
Location: Land-de DE
Seller: Wimmer- Umformtechnik GmbH

Single column hydraulic press Pressing force: 1600 kN Height: 1000 mm Stroke: 500 mm Weight: approx. 8000 kg Connection: 20,5 KW G730i8ys with light curtain Fabr. Sick Two-hand operation lateral ones. Protection grid

Category: 109 other metal working machines
approved
dealer
New in: used
Location: Land-it IT
Seller: EURO MACHINE TOOLS srl

dimen. 1800x2000 mm -

Category: 104 grinding machines
approved
dealer
New in: used
Location: Land-de DE
Seller: Innovac GmbH

Grinding diameter: 360mm, grinding length: 450mm, max. workpiece length: 600mm, weight: 900kg.

Category: 103 milling machines
approved
dealer
New in: used
Location: Land-it IT
Seller: EURO MACHINE TOOLS srl

Long. travel 1100 mm - Vert. travel 400 mm - Cross travel 350 mm - Table dimen. 460x1600 mm - Spindle speed 1400 RPM -

Category: 106 presses
approved
dealer
New in: used
Location: Land-de DE
Seller: ZOMA Maschinenhandel

Single-acting crank press, second-hand single action crank press, used Type / type: PKZZ I 500 Year / year of make: 1971 Manufacturer / make: WMW Erfurt Pressing power / rated pressure: 500 t Table size / surface of bed: 2800 mm x 1450 mm. Height between table and plunger 's largest stroke down, adjusting up /. maximum distance bed to slide: 1000 mm Stroke / stroke: 500 mm Tappet adjustment / adjustment of slide: 500 mm Table height / height of bed: 330 mm Cushions in the table / cushion in bed: Yes Cushion stroke / stroke in cushion: 200 mm Counter force: 1000 kN Ejector force: 157 kN RAM / ram: 2750 mm x 1450 mm Number / numer of strokes: 14 / min Weight ...

Category: 104 grinding machines
approved
dealer
New in: 1991
Location: Country-de Germany, 90441 Nürnberg
Seller: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

internal diameter: 400 mm grinding depth: 710 mm swing diameter: 500 / 900 mm centre height: 255 / 455 mm work piece spindle speed: 16x 40 - 400 U/min workpiece spindle - bore: 58,50 mm grinding head swivelling: 15 Grad grinding spindle speed: U/min grinding wheel size: Ã?120 x 240 mm table speeds: 0,1 - 8,00 m/min distance of workpiece spindle-taper cone: max. 3.170 mm infeed speed of wheel carriage: 0,05 - 0,50 mm/min internal grinding motor: 7,50 kW face grinding motor: 4,00 kW workpiece weight: 500 kg total power requirement: 17,00 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 5,80 x 2,40 x H2,00 m Internal and surface grinder with DRO. The data for this ad was  ...

Category: 106 presses
approved
dealer
New in: 1971
Location: Land-de DE
Seller: ZOMA Maschinenhandel

Single-acting crank press, second-hand single action crank press, used Type / type: PKZZ I 500 Year / year of make: 1971 Manufacturer / make: WMW Erfurt Pressing power / rated pressure: 500 t Table size / surface of bed: 2800 mm x 1450 mm. Height between table and plunger 's largest stroke down, adjusting up /. maximum distance bed to slide: 1000 mm Stroke / stroke: 500 mm Tappet adjustment / adjustment of slide: 500 mm Table height / height of bed: 330 mm Cushions in the table / cushion in bed: Yes Cushion stroke / stroke in cushion: 200 mm Counter force: 1000 kN Ejector force: 157 kN RAM / ram: 2750 mm x 1450 mm Number / numer of strokes: 14 / min Weight ...

Category: 103 milling machines
approved
dealer
New in: used
Location: Country-de Germany, 76316 Malsch
Seller: Emuk Werkzeugmaschinen GmbH

max. workpiece diameter: 500 mm threading length: 2000 mm max. module: 8/12 min. module: 0,3 centre height: 260 mm spindle bore: 102 mm hob turning speeds: 45 - 560 U/min workpiece dia. over bed: 500 mm workpiece dia. over saddle: 250 mm total power requirement: 9 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m Lynettes, change gears, arbors, leveling feet,.... Very nice condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
approved
dealer
New in: used
Location: Land-de DE
Seller: ZOMA Maschinenhandel

Used hydraulic press, hydraulic press, usedTyp: PYE 100 SS manufacturer: WMW ZeulenrodaBaujahr: 1982PreÃ?kraft / rated pressure: 100 tTischgröÃ?e / surface of bed: 750 x 560 mm hole in the table / hole in table: 225 mm DurchmStöÃ?elgröÃ?e / ram: 530 x 400 mmStöÃ?elhub / stroke of slide: 500 mmAusladung / Cap: mmStöÃ?elverstellung 380 / adjustment of slide: 500 mmStöÃ?elgeschw. / speed of slide: 200 mm / sec down/down 400 mm / sec expensed. / up maximum distance. Table and plunger / max distance between table and ...

Category: 106 presses
approved
dealer
New in: used
Location: Country-NL Netherlands, 7461A Rijssen
Seller: Voortman Machines

Category: 101 boring mills and machining centers
approved
dealer
New in: used
Location: Land-fr FR
Seller: Retec Machines S.A.S

CNC vertical jig boring machine WMW MIKROMAT Type BKoZ 900x1400/5NC Travel X 1120 mm Travel Y 710 mm Spindle travel Z 315 mm Travel W 630 mm Numerical Command CNC NUM 1060 Spindle Ø 125 mm Cone SA40 Rotation from 36 to 2240 RPM Table size 1400 x 900 mm Distance between colums 1080 mm Maxi distance spindle nose/table from 0 to 900 mm max Maxi eligible load on table 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage 380 V Dimensions (L x W x H) 4000 x 2460 x 3030 mm Weight approx. 9 T MACHINE IN OUR STOCK IN FRANCE.

Category: 102 lathes
New in: 1985
Location: Country-DE Germany, 35460 Staufenberg
Seller: HD Werkzeugmaschinenhandel GmbH

faceplate diameter:2500 mm swing diameter:2500 mm turning height:1250 mm power requirement:35 kW weight of the machine ca.:37.9 t dimensions of the machine ca.: L x B x H 4.1 × 5.27 × 4.8 m

Category: 103 milling machines
approved
dealer
New in: used
Location: Land-de DE
Seller: Oeben Werkzeugmaschinen

Technical data Spindle carrier 50 SK Table 1600 x 400 mm Lapse 28-1400 RPM. Power 14.5 KW Weight 4 to Tischauf 1600 x 400 mm Procedures X 1120 mm Y-axis 345 mm Z axis 400 mm Spindle Center to column surface projection 450 mm Spindle nose to table surface height 100-500 mm Feed, longitudinal and transverse 16-800 mm / min Feed, vertical 5-250 mm / min Rapid traverse, longitudinal / transverse 3150 mm/min Rapid traverse vertical 1000 mm / min Creep, longitudinal and transverse 50 mm / min Creep, vertical 16 mm/min Table load max. 1500 kg Spindle carrier 50 SK Milling head swivel right and left side 45 ° 18 Spindeldrehzahen 28-1400 RPM. Spndelhub 90 mm  ...

Category: 104 grinding machines
approved
dealer
New in: 1970
Location: Country-DE Germany, 72555 Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

workpiece diameter: 630 mm workpiece weight: 500 kg workpiece height: 250 mm total power requirement: 9 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m Rotary Table Horizontal Surface Grinder, 630Ã?, Infeed, swivable Table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines
approved
dealer
New in: 1987
Location: Land-de DE
Seller: Oeben Werkzeugmaschinen

Technical data Spindle retainer 40 SK Table 355 x 1,250 mm Speeds 56-2800 RPM. Power 8 KW Weight 2 to Spindle retainer 40 SK Table 355 x 1,250 mm Procedures Iängs 850 mm transverse 330 mm vertical 440 mm Inclination of the table 30° Distance from spindle Center to Tischï¬?äche of 470 mm Spindeldrehzahten 56-2800 RPM Infinitely variable feed rates 10-630 mm / min. Vertical 4-252 mm / min. Rapid traverse, longitudinal and transverse 3,150 mm/min: vertical 1,260 mm/min: Table load of 250 kg Dimensions Lxwxh 1,600 x 2500 x 1700 mm Facilities Overarm, Aufsteckfräsdom, Kühlmitteieinrichtung, ...

Category: 102 lathes
approved
dealer
New in: 1960
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Category: 104 grinding machines
approved
dealer
New in: used
Location: Land-de DE
Seller: ZOMA Maschinenhandel

Entry-hole grinding machine, little used Type SJXZB/1 Fabr. WMW Suhl size 160 x 1000 LO Technical data: KL. / gr. Drilling / grinding length 50 / 1000 mm Spindle retainer: MK 3 KL / gr. Workpiece diameter 6 / 160 mm Grinding head in the Arbor hole 125 mm Oszilationsgroesse 0-5 mm Oszilationsdoppelhuebe 125 / min Speeds of 55 / 110 RPM Power 4 kW Weight 620 kg Specification:-motor. Material rotation -Oscillation -Control cabinet

Category: 101 boring mills and machining centers
approved
dealer
New in: used
Location: Country-fr France, 68190 Ensisheim
Seller: Retec Machines S.A.S

Category: 109 other metal working machines
New in: used
Location: Land-in IN
Seller: Syndicate Machines Pvt. Ltd.

WMW Machine Name Thread Rolling Machine Manufacturer WMW Model NA Location Mumbai Year Of Manufacturing Technical Specification Max. length of thread 2000.0 mm Max. thrust 12.5 T Min/Max of thread 70 Motor power

Category: 109 other metal working machines
approved
dealer
New in: used
Price 120 €
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Category: 101 boring mills and machining centers
New in: used
Location: Land-in IN
Seller: Syndicate Machines Pvt. Ltd.

WMW Machine Name Radial Drill Machine Manufacturer WMW Model NA Location Mumbai Year Of Manufacturing NA Technical Specification Make WMW Capacity 50mm

Category: 102 lathes
approved
dealer
New in: used
Price 450 €
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Category: 106 presses
New in: used
Location: Land-in IN
Seller: Syndicate Machines Pvt. Ltd.

WMW Machine Name Power Press Manufacturer WMW Model PEDN 632 Location Mumbai Year Of Manufacturing NA Technical Specification WMW 63 TONS CAPACITY 63 TONS VARIABLE STROKE 8- 120MM RAM ADJUSTMENT 70MM CONTINUOUS STROKING RATE 47 DAYLIGHT 295MM TABLE AREA 770MM X 310MM RAM AREA 700MM X 450MM Depth Of Throat 350mm MOTOR 6 Kw Width 1500mm Depth 2045mm Heigh

Category: 109 other metal working machines
approved
dealer
New in: used
Price 270 €
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)