We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals
used
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
used
Capacity: 250 t Stroke: 10 mm Distance column/center (Throat): 360 mm Table length: 900 mm Table width: 630 mm MAKE WMW Zeulenroda TYPE PYE 250 N YEAR 80 er SPECIFICATIONS Hydraulic / Mechanical HydraulicPress force 250 Ton Table Length x Width 900 x 630 mm Throat360 mm Die height 1000 mm Stroke Length 500 mm Power 11 kW DIMENSIONS Length 1250 mm Width 2000 mm Height 3800 mm
used
Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
C-frame Stand-up Press WMW Power: 3 tone Mounting height: 355 mm Stroke: 280 mm Stumbling speed: 0.1 m/sec. Machine Weight: 400 kg Country of origin Germany
used
Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size: 240 x 210 mmProjection: 165 mmDistance table - ram: 250 mmExternal dimensions L x W x H: 400 x 310 x 640 mmColour blueused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size drm. : 200 mm2 recesses in the table: 30, 60 cm wideProjection: 265 mmDistance table - ram: 390 mmExternal dimensions L x W x H: 600 x 280 x 870 mmColor grayused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
2-column screw press make probably WMWTechnical specifications:Pressing force approx.: 10 t (estimated)Handwheel diameter: 800 mmProjection between the uprights: 400 mmTable size: 350 x 440 mmHole in the table Drm. : 100 mmRam: 130 x 110 mmInstallation height: 300 mmExternal dimensions L x W x H: 900 x 500 x 1780 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size Drm. : 200 mmThroat: 250 mmDistance table - ram: 300 mmMandrel diameter: 45 mmExternal dimensions L x W x H: 550 x 220 x 700 mmColor orangeWith- Base 1000 x 500 x 830 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm
used
heavy press with casting stand
used
Hydraulic power pack with tank and piston pump, compact power pack WMW 1200.10 - 310 028 053491 Tank: approx. 1.0 l Engine: ??? 56?4N3 0,12 kW 1350 rpm 220 / 380 V 3AC spare part for milling machine AUERBACH FUW 400 ! used, tested ! Dimensions: 360 x 135 x 185 mm
used
Hydraulic cylinder, double-acting WMW Hydraulic cylinder for UPW 63 ( UPW63 ) Piston diameter: Ø 140 mm rod diameter: Ø 56 / 120 mm stroke: 56 mm shaft diameter: Ø 22 mm spare part for WMW UPW 63 ! New ! Dimensions: 420 x 184 x 184 mm
used
Hydraulic cylinder, single-acting, spring return WMW Hydraulic cylinder for UPW 63 piston diameter: Ø 140 mm rod diameter: Ø 55 / 80 mm stroke: approx. 17 mm spare part for WMW UPW 63 ! New ! Dimensions: 294 x 184 x 184 mm
used
Hydraulic press WMW ZEULENRODA PYE 10x250 Nominal force: 10 t stroke: max approx. 400 mm total power requirement: 1.6 kW Machine weight approx.: 1.1 t space requirement approx.: 1100 x650 x 2050 mm installation height: 500 mm Table size: 400 x 450 mm
used
hydraulic single-column press WEMA ZEULENRODA PYE160/S/1M built: 1983 pressing force: 160 t projection: 360 mm stroke: 500 mm table: 900 x 360 mm conventional control total power requirement: 17 kW Without tables can be purchased separately Mechanical ejector available Dimensions: 2000 x 950 x 3700 mm
used
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Beeks: soft -Chuck size: Ø 200 mm -Weight: 22 kg
used
Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm -Weight: 24 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg
used
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Admission thread: M20 -Pitch: 2.5 mm -Weight: 32 kg
used
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper: 8 -Thread: M30 -Pitch: 1.5 mm -Weight: 38.5 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg
used
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Rezess: Ø 230 mm -Hole circle: Ø 200 mm -Number: 2x available -Price: per piece -Weight: 35 kg