Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 161394884

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Capacity: 160 t Sheet length: 1200 mm Sheet width: 400 mm Width between standards: 400 mm Capacity Kg:           160000 Distance between column:850mm Table Length:          1200mm Table Width:           400mm Table Height:          400mm Ram stroke:            500mm Power:                 11kW Length:                4200mm Width:                 1500mm Height:                1500mm Weight:                6250kg

Category: 106 presses / Eccentric Presses
Latest update: 29.01.2024 add to watchlist
approved
dealer
item-No.: 163239209
New in: 2020

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: 42 Rudniki Land-pl

add to watchlist

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

Category: 106 presses / Crank Presses
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 145836795
New in: 1975

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

Category: 106 presses / Crank Presses
Latest update: 02.03.2024 add to watchlist
approved
dealer
item-No.: 157576794

used

Location: Land-bg

add to watchlist

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

Category: 106 presses / Crank Presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 158481723
New in: 1987

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

Category: 106 presses / Punching Presses
Latest update: 02.03.2024 add to watchlist
approved
dealer
item-No.: 158599434

used

Location: Land-bg

add to watchlist

Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons

Category: 106 presses / Double Column Presses
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 161944919
New in: 1984

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 100.000 € add to watchlist

ERFURT PKZZ 315 double column press manufactured in 1984 in Germany is used for, among others, cutting, machining, bending and punching sheet metal and strip metal. Features such as the ability of extensive workpiece machining, a large work table and a 315-tonne operating slider make the crank press ideal for mass production of things such as washing machine parts, agricultural machinery or other types of vehicles. The ERFURT mechanical press is also distinguished by its high-quality welded steel construction, ensuring excellent stability during the production process. The machine uses a slider with a beam ejector, which is adjustable within a range of 400 mm via a motor reduction gear with overload protection. In order to increase the life of the tools and the quality of the parts produced, the 2500 mm long and 1400 mm wide work table has been equipped with hydropneumatic cushions.  ...

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
item-No.: 163674358

used

Seller: Surplex GmbH
Location: Etten-Leur Land-nl
Price: used machinery auction RESALE 3.500 € add to watchlist

Description: SPECIFICATIONS Feature: Erfurt Type: PR160/315 Capacity: 160 T Table length: 800 mm Table width: 550 mm Air coupling: Yes 2-Hand protection: Yes Unloading: 300 mm Number of slugs: 50 p/min Electrically adjustable slug: 100 mm weight approx.: 14,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 3,200 x 3,100 mm

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
item-No.: 163675673
New in: 1974

used

Seller: Vögtle Service GmbH
Location: Lager Eislingen, Baden-Württemberg

add to watchlist

pressure:250 t throat:450 mm stroke:36 - 126 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:525 mm table surface area:1000 x 750 mm hole in the table:400 x 360 mm table height over floor:1000 mm ram surface:600 x 500 mm ram adjustment:111 mm power requirement:19,0 kW weight:13,5 t Dimensions (WxDxH):1,3 x 3,2 x 3,35 m clutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

Category: 106 presses
Latest update: 30.11.2023 add to watchlist
approved
dealer
item-No.: 128206185
New in: 1981

used

check Seller: ERS MANAGEMENT LTD
Location: Land-uk

add to watchlist

Hydraulic safety lock from an overload: 125-250 tons Number of idle slide strokes per minute: -For the head press: 20 -For the subsequent press: 25 Number of microdrive strokes per minute: 0,45 Electric motor for the press table: 45 kW Electric motor for the microdrive: 17 kW Max. balancing weight of the upper part of die on the slide: 3,5 tons Distance between columns: 2550 mm Slide stroke: 400 mm Max. extract depth: 160 mm Slide adjustment: 250 mm Adjustment range of the extract depth: 0-160 mm Max. closed height: 800 mm Height of the pull-out table: 500 mm Table dimensions: 2500x1250 mm Table bore dimensions: 2100x850 mm Slide dimensions: 2500x250 mm Weight: 74500 kg

Category: 106 presses
Latest update: 29.06.2023 add to watchlist
approved
dealer
item-No.: 5161731

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: Land-pl

add to watchlist

Manufacturer: ERFURT - Niemcy 2 PIECES AVAILABLE Model: PKZV I 1250 Condition: Very good, complete, under power Technical details Table: 4000 x 1800mm Press weight: 230T Force: 1250T Slide stroke: 630mm Centres of pressure: 2 Adjustability of slide: 630mm Max delight between bolster and slide: 1165mm Width beteen columns: 4000mm Slide area: 3950 x 1800mm Bed area: 4000 x 1800mm Opening in bed: 3750 x 1300mm Main motor power: 132kW Idle stroke rate: 11 per minute Counter pressure of cushion in bed: 250T Stroke of cushion plate: 250mm

Category: 106 presses
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 126123937
New in: 1978

used

check Seller: ERS MANAGEMENT LTD
Location: Land-uk
Price: 75.000 € add to watchlist

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

Category: 106 presses
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 126102183
New in: 1983

used

check Seller: ERS MANAGEMENT LTD
Location: Land-uk
Price: 85.000 € add to watchlist

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

Category: 106 presses
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 126114421
New in: 1982

used

check Seller: ERS MANAGEMENT LTD
Location: Land-uk
Price: 75.000 € add to watchlist

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

Category: 106 presses
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 128279965
New in: 1983

used

check Seller: ERS MANAGEMENT LTD
Location: Land-uk

add to watchlist

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t

Category: 106 presses
Latest update: 06.11.2023 add to watchlist
approved
dealer
item-No.: 144363039
New in: 1990

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

cutting effort 1000t the number of strokes (no load) 17 /min course a support of the blades 140mm Max. cutting diameter of rounded workpiece, mm 190 Max. cutting diameter of squared workpiece, mm 180 for 450 N/mm2. Machine weight, kg 60000

Category: 106 presses
Latest update: 06.11.2023 add to watchlist
approved
dealer
item-No.: 144381038
New in: 1993

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

cutting effort 800t the number of strokes (no load) 20 /min single strokes 16 /min course a support of the blades 125mm Main drive motor 55 kw in 1475 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800 900 N/mm2 square mm 160 150 132 118 106 100 round mm 170 160 140 125 112 106 strip steel 425x 67 60 53 47 42 38 320 x 80

Category: 106 presses
Latest update: 06.11.2023 add to watchlist
approved
dealer
item-No.: 144381199
New in: 1993

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

course of the blade slide 100 mm number of moves at idle position 25 / min Main drive motor 30 kw in 1480 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800N/mm2 square mm 125 118 105 95 85 round mm 132 125 112 100 90 flat 375x 60 45 40 35 32 Weight 23,000 kg (50,692 lb) Length x width x height 1850 mm × 2450 mm × 3750 mm

Category: 106 presses
Latest update: 06.11.2023 add to watchlist
approved
dealer
item-No.: 144477791
New in: 1987

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

Max shearing power: 500 ton Max speed: 40/1 min Stroke: 100 mm Single stroke: 25/1 min Square: 125 mm Max round: 132 mm Length of blades: 420 mm Main motor power: 45 kW Height above floor: 3500 mm Weight: 23 ton

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163460008
New in: 1980

used

Seller: Exapro
Location: Land-lt
Price: 59.000 € add to watchlist

Mettal cutting shears BEM Berlin-Erfurter Maschinenfabrik STA3/3/2050 2 Working condition.

Category: 106 presses
Latest update: 29.06.2023 add to watchlist
approved
dealer
item-No.: 144892525

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: 42 Rudniki, Mstowska 10A Land-pl

add to watchlist

Very good machine, offer with feeded Table dimension: 4600 x 2200 Between columnsL 5022

Category: 106 presses
Latest update: 06.11.2023 add to watchlist
approved
dealer
item-No.: 147679925
New in: 1987

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

Max shearing power: 315 ton Stroke: 70 mm Single stroke: 30/1 min Square: 100 mm Max billet cut : 106 mm Main motor power: 20 kW Weight: 14 ton

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163677049

used

Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling.

Category: 106 presses
Latest update: 06.11.2023 add to watchlist
approved
dealer
item-No.: 151875436
New in: 1967

used

check Seller: ERS MANAGEMENT LTD
Location: Land-uk

add to watchlist

Capacity: 800 tons Stroke of slider: 500 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Press dimensions, mm 3800 x 2800 x 6900 Weight: 57 tons

Category: 106 presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 155896124

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

Capacity: 800 tons Stroke of slider: 400 mm Distance between table and slider 850 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Press dimensions, mm 3800 x 2800 x 6900 Weight: 57 tons

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online