used WIEGER Guillotine Shears

sheet width: mm plate thickness: mm distance between columns: mm digital: working width: 4500 mm : 8mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Plate shears - mechanical - technical details, plate width 2000 mm, plate thickness 3 mm, distance between columns 2080 mm, total power requirement 5 kW, machine weight approx. 2.5 t weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,850 x 1,450 x 1,410 mm

Table scissors Wieger 6 / 30 year of construction: 1991 to 6 mm Immediately available

Plate shear of Walter 6 / 30 Year of construction: 1991 up to 6 mm Now available

pressure: 0160 t chamfer lenght: 5120 mm distance between columns: 4050 mm Control: konv. throat: 300 mm table width: 200 mm stroke max.: 200 mm dayligth: 400 mm feed down: 50 mm/sec feed up: 100 mm/sec feed under pressure: 5 mm/sec total power requirement: 11 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 5,4 x 1,75 x 3,3 m Machine will be supplied with many tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. working width: 3000mm, max. sheet thickness: 8mm, with documentation.

Capacity: 80 t Folding length: 2000 mm Make Wieger 80 T Type SIGMA Year 1988 Hydr. conventionel pressbrake Capacity (metric tons) T = 80 T Folding length (mm) L = 2000 Down stroke or Up stroke singel Tandem type sick safety multi V lower  

sheet width: 3000 mm plate thickness: 6 mm distance between columns: 3100 mm cutting angle: 1°15´ no. of strokes: 16 Hub/min down holder: 16 Stück back stop - adjustable: 750 mm total power requirement: 11 kW weight of the machine ca.: 5,7 t dimensions of machine L x W x H: 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 3 mm distance between columns: 2080 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: . mm distance between columns: . mm total power requirement: . kW weight of the machine ca.: 8 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mm plate thickness: 6,00 mm distance between columns: mm down holder: 14 total power requirement: 15 kW weight of the machine ca.: ca. 5-6 t dimensions of the machine ca.: 2,80 x 2,20 x 1,85 m • Motorized adjustable back gauge with display up to 700 mm • Angle stop • 2 support arms • Cutting length limitation • Stroke counter • Cutting gap adjustment • Control cabinet renewed in 2021 • Second set of knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 5,5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guillotine shears, FASTI type 506-10-2,5 Masch. Nr. 96-506-018 Year of manufacture 1996 Cutting length 1030 mm Cutting thickness 2.5 mm Working height 850 mm Drive power 4 kW Mains connection 400 volts, 50 Hz. - mechanical sheet metal hold-down - electric foot switch - simple backgauge 550 mm with handwheel adjustment - 2 support arms 550 mm - angle stop right 750 mm - protective housing SICK behind the machine - control cabinet fixed to the machine space requirement L x W x H 2150 x 1650 x 1400 mm weight 650 kg good condition; used

guillotine shears, sheet metal shears DIGEP type OL 3 Fabr. No. 1312 Year of construction 1977 Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mm Cutting thickness at 450 N/mm² 3 mm single backgauge 500 mm Column projection 200 mm Cutting angle 2 Stroke rate at full cutting length max. 50 strokes/min. Working height 860 mm Motor power 2.2 kW Mains connection 380 volts, 50 Hz - LED cutting area lighting - simple backgauge with manual adjustment - Mechanical foot switch - Front angle stop left - 1 piece front sheet metal supports 300 mm Space requirement L x W x H 1660 x 1350 x 1200 mm Weight 1600 kg good condition; used

Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg

Working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 V, 6.3 kW space: 3200 x 2300 x 1270 mm weight: 4600 kg

OSTAS PLATE SHEAR TYPE RGM 1050 x 3 -Capaciteit 1050 x 3 mm -Achteraanslag -Voetbediening -Remmotor -Plaathouders -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Sheet thickness: 10,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness:    10mm Max. cutting length:        2.000mm Strokes on full length:     100mm Strokes in short 1000 length:1000 Number of down holders:     11 Approach speed:             50mm/sec. Power:                      15kW Length:                     2.700 mm  Width:                      2.050 mm  Height:                     2.050 mm  Weight:                     5.900 kg 

OSTAS PLATE SHEAR TYPE RGM 1050 x 6 -Capaciteit 1050 x 6 mm -Achteraanslag electric -Voetbediening -Remmotor -Plaathouders -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Sheet thickness: 25,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness:        25mm Max. cutting length:            3.070mm Strokes on full length:         7mm Strokes in short 1000 length:   12 Cutting angle:                  0,5 - 2,5 ° Length backgauge:               1.000mm Number of down holders:         15 Control:                        Siemens  Safety guides:                  Sick  Operated mechanical or hydraulic:hydraulic  Power:                          45kW Length:&nb ...

SAY MAK PLATE SHEAR TYPE SRGM H 1400 x 3 -Capaciteit 1400 x 3 mm -CN touchscreen achteraanslag besturing met various functies -Geknipte plaat gets voor-of achter de machine uit (dat kiest u op touchscreen) -Pneumatic plaathouder eighth -Plaathouders voor -Voetbediening -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Working width: 3050 mm sheet thickness: 6 mm throat depth: back gauge: 650 mm power: 380 V, 16 kW space: 3680 x 2060 x 1870 mm weight: 7580 kg

Cutting Lenght 6000 mm Cutting Thickness 16 mm Stroke per Min 10

OSTAS PLATE SHEAR TYPE ORGM 2050 x 3 -Capaciteit 2050 x 3 mm -Achteraanslag -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 1900 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS PLATE SHEAR TYPE ORGM 2050 x 3 -Capaciteit 2050 x 3 mm -Achteraanslag electrical -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 2000 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)