We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Article number: 04-03-110 Manufacturer: Weisser Heilbronn Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1989 L x W x H: approx. 3500x1000x1700mm Weight: approx. 3500kg Digital display: 2-axis digital display Heidenhain Dimensions: Max. turning diameter over bed: approx. Ø425mm Max. turning diameter via support: approx. Ø240mm Max.turning length: approx. 2000mm Rod passage: approx. Ø58mm Spindle: Speed range: approx. 28-2500 rpm Spindle nose: A 2-5 Drive power: approx. 5.5kW Tailstock: MK4 Accessories 3 – jaws – chuck Schunk Ø 250 mm Quick-release steel bracket + 4 inserts Electric feed protection Work light Complete machine documentation NOT – Off Various tension wrenches Coolant device L+Z spindle cover Machine feet Various turning steels ...
used
turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 2000 mm spindle turning speed range: 5,6 - 1120 U/min number of feeds: 40 spindle bore: 56 mm longitudinal feeds:: 0,056 - 12,8 mm/U face feeds: 0,028 - 6,4 thread - mm pitch: 0,5 - 112 mm thread - module: 0,125 - 28 mm thread - inch: 1 -56 Gang / inch. total power requirement: 7,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3,5 x 1,2 x 1,5 m • fixed steady • cooling device • thread cutting automatic - GSA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T
used
Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked !!
used
Center height: 999 mm Center distance: 1500 mm Spindle bore: 161 mm DBC Turning Length: 1500mm Swing over bed Ø: 1140mm Swing over cross slide Ø:810mm Swing in the gap Ø: 1420mm Gap length: 575mm Spindle bore: 161mm Tailstock spindle Ø: 140Ø Stroke pinole: 250mm Spindle taper: 6Mk Speeds / ranges: 1120Rpm Length: 4500mm Width: 2200mm Height: 2200mm Weight: & ...
used
Vertical lathe Year : 1999 Siemens struerung
used
Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.
used
Top width 2000 mm Turning diameter over bed 600 mm Spindle bore about Ã?80 Bed width 430 mm Tailstock MK5 Chuck diameter 315 mm Weight approx. 8to 92. P2b9fy8n Control Bosch CC220 (recently renewed)
used
Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
used
Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
used
Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!
used
White 91 Portioning Machine used Hourly capacity approx.: 1400 portions Ejector diameter: 90mm (other plates on request) Strength adjustment via sliding handle at the front Machine with corresponding traces of use and wear, but in good condition neat and quiet run Machine must be thoroughly cleaned before use Video about test run available
used
turning diameter: 150 mm turning length: - mm turning height: - mm control: SINUMERIK 840D SL x-axis: 830 mm z-axis: 180 mm rapid power traverse in X-and Z direction: 30 / 60 m/min turning speeds: 4500 U/min spindle head: A6 spindle motor: 27 kW spindle bearing diameter: 90 mm circle diameter: 670 mm chucking diameter: 210 mm total power requirement: 36 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 2,5 x 2,5 x 2,6 m multifunctional, single-spindle Pick-up lathe with vertical spindle Slide arrangement. - CNC control Siemens 840D SL - C axis - Chip conveyor - cooling unit - Feeding - disc turret with tool drive 12-fold 2 identic units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 3600 mm turning diameter over slide rest: . mm turning length: 10500 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
White PF90/180-REG portioning machine used Hourly output approx.: 2000 servings Ejector diameter: 90mm (Other drums on request) Thickness adjustment via drum possible Operation via foot pedal, if you go down from it, the machine stops Poti for speed regulation is fixed, should be made viable, or replaced Machine with corresponding signs of use and wear but in good condition neat and quiet running Machine must be thoroughly cleaned before use New list price 2019 in this equipment: 16850,- EUR net Video about test run and other pictures available
used
Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost ...
used
turning diameter over bed: 500 mm turning diameter over slide rest: 250 mm turning length: 1200 mm turning diameter in the gap: mm turning speeds: 7,1 - 1400 U/min centre height: 250 mm spindle bore: 49 mm total power requirement: 7,5 kW weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,85 x 1,3 x 1,6 m Lead and feed spindle lathe - 3-jaw chuck 260mm - 4-fold steel holder - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation
used
- Automatic feeding - quick-change chisel holder
used
An inspection is possible.
used
turning length: 2000 mm turning diameter: 1200 mm centre height: 600 mm control: Siemens Sinumerik 840D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 40 bar -Liter output: 11 +4 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 1.5 kW 1410 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Price: per piece -Number: 3x available -Dimensions: 600/1000/H850 mm -Weight: 220 kg
used
Hello; We are selling our beautiful dispenser that fills all types of liquids (compote - alcohol etc.) quickly and efficiently. This dispenser can be used to fill all types of liquids and containers. The setting is very simple to operate. The machine is made of stainless steel and is very durable. NEAR MINT CONDITION The Professional kit includes : -Compressor (lowered machine kit): Ideal for not carrying your kegs. Angled outlet with anti-drip system. -Pneumatic pedal (for fast, efficient work). -Adjustable stainless steel tray. - Brand WEISSER -
used
Description: Machine number: 177055919 Control system: SIEMENS SINUMERIK 840 D Chuck diameter: max. 210 mm Turning diameter: 400 mm Workpiece length: 120 mm X-axis travel path: 1130 mm (total travel path) X-axis travel path (working path): 400 mm Z-axis travel path: 280 mm Rapid traverse X-axis: 60000 mm/min Rapid traverse Z-axis: 30000 mm/min Motor spindle: Spindle diameter in the front bearing: 90 mm Spindle speeds: Rotating spindle speed range infinitely variable: max. 6000 rpm Disk turret with holder for driven tools: 8 pieces Shank diameter: 40 mm Spindle speed: max. 4000 rpm Torque: max. 50 Nm Working range with vertical drilling spindles Number of drilling spindles: 3 Spindle speed: max. 5000 rpm Drive power: 16 kW Torque: max. 83 Nm Incl. 8-station tool turret and a power chuck (diameter: approx. 250 mm) from the manufacturer SMW Incl. conveyor station from the manufacturer SCHNA ...
used
Description: SPECIFICATIONS Character: White Heilbronn Type: Gigant Distance between centers: 2,500 mm Height between centers: 530 mm Turning diameter above the bed: ø1,060 mm Turning diameter above the base: ø700 mm Door outlet: ø102 mm Specs 3-claw chuck 4-jaw chuck Brand 4-claw: Forkardt PSA900 weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,100 mm