Category: 102 lathes / Rotating Benches
Latest update: 08.03.2021 add to watchlist
item-No.: 99349138
New in: 1954

used

Seller: Karl Bachl GmbH & Co. KG
Location: Land-de

add to watchlist

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

Category: 104 grinding machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162814300

used

Location: Land-de
Price: 750 € add to watchlist

Internal grinding machine, internal grinding device, internal grinding spindle, drum grinding machine -Manufacturer: Paul Eugen Mayer, internal grinding machine type PMB -Drive motor: Hanning 1.1 kW / 2810 rpm -Grinding spindle: Ø 100 x 140 mm / see photos -Support table: pivoting -Total dimensions: 580/500/H1180 mm -Weight: 99 kg

Category: 102 lathes / CNC Turning Machines
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 115264085
New in: 1992

used

check Seller: ZIEGLER Maschinen & Werkzeuge
Location: Land-at
Price: VB 4.500 € add to watchlist

Top width 2000 mm Turning diameter over bed 600 mm Spindle bore about Ã?80 Bed width 430 mm Tailstock MK5 Chuck diameter 315 mm Weight approx. 8to 92. P2b9fy8n Control Bosch CC220 (recently renewed)

Category: 904 garden and communal machines / Snow removal machines
Latest update: 15.01.2024 add to watchlist
approved
dealer
item-No.: 121176424
New in: 2003

used

check Seller: JODAU - Kommunaltechnik
Location: Land-de

add to watchlist

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Category: 904 garden and communal machines / Snow removal machines
Latest update: 15.01.2024 add to watchlist
approved
dealer
item-No.: 142401951
New in: 2005

used

check Seller: JODAU - Kommunaltechnik
Location: 24941 Flensburg, Wieselhof 29 Land-de

add to watchlist

Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Category: 904 garden and communal machines / Snow removal machines
Latest update: 15.01.2024 add to watchlist
approved
dealer
item-No.: 150938421
New in: 1998

used

check Seller: JODAU - Kommunaltechnik
Location: 24941 Flensburg Land-de

add to watchlist

Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!

Category: 703 meat and fish processing machines / Portioning machines
Latest update: 19.01.2024 add to watchlist
approved
dealer
item-No.: 152215342

used

check Seller: Statt Nahrungsmittelmaschinen
Location: 97786 Motten Land-de
Price: 2.355 € add to watchlist

White 91 Portioning Machine used Hourly capacity approx.: 1400 portions Ejector diameter: 90mm (other plates on request) Strength adjustment via sliding handle at the front Machine with corresponding traces of use and wear, but in good condition neat and quiet run Machine must be thoroughly cleaned before use Video about test run available

Category: 102 lathes / Vertical Turning Centres
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 155980107
New in: 2011

used

check Seller: Kemmerich Werkzeugmaschinen GmbH
Location: ab Lager Monheim am Rhein Land-de

add to watchlist

turning diameter: 150 mm turning length: - mm turning height: - mm control: SINUMERIK 840D SL x-axis: 830 mm z-axis: 180 mm rapid power traverse in X-and Z direction: 30 / 60 m/min turning speeds: 4500 U/min spindle head: A6 spindle motor: 27 kW spindle bearing diameter: 90 mm circle diameter: 670 mm chucking diameter: 210 mm total power requirement: 36 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 2,5 x 2,5 x 2,6 m multifunctional, single-spindle Pick-up lathe with vertical spindle Slide arrangement. - CNC control Siemens 840D SL - C axis - Chip conveyor - cooling unit - Feeding - disc turret with tool drive 12-fold 2 identic units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156642528

used

Location: Land-de

add to watchlist

turning diameter over bed: 3600 mm turning diameter over slide rest: . mm turning length: 10500 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156649228
New in: 1970

used

check Seller: FEYEN Maschinen GmbH
Location: ab Lager Krefeld Land-de

add to watchlist

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 2000 mm spindle turning speed range: 5,6 - 1120 U/min number of feeds: 40 spindle bore: 56 mm longitudinal feeds:: 0,056 - 12,8 mm/U face feeds: 0,028 - 6,4 thread - mm pitch: 0,5 - 112 mm thread - module: 0,125 - 28 mm thread - inch: 1 -56 Gang / inch. total power requirement: 7,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3,5 x 1,2 x 1,5 m • fixed steady • cooling device • thread cutting automatic - GSA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163676782
New in: 1972

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

An inspection is possible.

Category: 703 meat and fish processing machines / Portioning machines
Latest update: 19.01.2024 add to watchlist
approved
dealer
item-No.: 159348687

used

check Seller: Statt Nahrungsmittelmaschinen
Location: Land-de
Price: 5.750 € add to watchlist

White PF90/180-REG portioning machine used Hourly output approx.: 2000 servings Ejector diameter: 90mm (Other drums on request) Thickness adjustment via drum possible Operation via foot pedal, if you go down from it, the machine stops Poti for speed regulation is fixed, should be made viable, or replaced Machine with corresponding signs of use and wear but in good condition neat and quiet running Machine must be thoroughly cleaned before use New list price 2019 in this equipment: 16850,- EUR net Video about test run and other pictures available

Category: 102 lathes / Universal Turning Machines (Lathes)
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 159411836

used

check Seller: Retec Machines S.A.S
Location: Land-fr

add to watchlist

Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Category: 904 garden and communal machines / Snow removal machines
Latest update: 15.01.2024 add to watchlist
approved
dealer
item-No.: 160522264

used

check Seller: JODAU - Kommunaltechnik
Location: 24941 Flensburg Land-de

add to watchlist

Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost  ...

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 17.01.2024 add to watchlist
item-No.: 161549421
New in: 1983

used

Seller: PX-Maschinenhandel
Location: 73635 Rudersberg Land-de

add to watchlist

Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked !!

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 161951247
New in: 1970

used

check Seller: WMT GmbH & Co. KG
Location: 46342 Velen Land-de

add to watchlist

turning diameter over bed: 500 mm turning diameter over slide rest: 250 mm turning length: 1200 mm turning diameter in the gap: mm turning speeds: 7,1 - 1400 U/min centre height: 250 mm spindle bore: 49 mm total power requirement: 7,5 kW weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,85 x 1,3 x 1,6 m Lead and feed spindle lathe - 3-jaw chuck 260mm - 4-fold steel holder - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 162276728

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 999 mm Center distance: 1500 mm Spindle bore: 161 mm DBC Turning Length:      1500mm Swing over bed Ø:        1140mm Swing over cross slide Ø:810mm Swing in the gap Ø:      1420mm Gap length:              575mm Spindle bore:            161mm Tailstock spindle Ø:     140Ø Stroke pinole:           250mm Spindle taper:           6Mk Speeds / ranges:         1120Rpm Length:                  4500mm Width:                   2200mm Height:                  2200mm Weight:            & ...

Category: 102 lathes / CNC Turning Machines
Latest update: 29.12.2023 add to watchlist
approved
dealer
item-No.: 162284237
New in: 1982

used

check Seller: RVM heavy machines
Location: Land-de

add to watchlist

Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation

Category: 102 lathes / Vertikal Turning Machines (Lathes)
Latest update: 08.10.2023 add to watchlist
approved
dealer
item-No.: 162568186
New in: 1999

used

check Seller: SENER INTERNATIONALE MASCHINEN
Location: 97215 Uffenheim Land-de
Price: 5.000 € add to watchlist

Vertical lathe Year : 1999 Siemens struerung

Category: 102 lathes / Heavy Lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 162703792
New in: 1982

used

check Seller: ATMH werkzeugmaschinen-Handel GmbH
Location: Ennepetal - Halle 3 Land-de

add to watchlist

turning length: 2000 mm turning diameter: 1200 mm centre height: 600 mm control: Siemens Sinumerik 840D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1402 other machines for mechanical handling
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162823049
New in: 1964

used

Location: Land-de
Price: 550 € add to watchlist

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 40 bar -Liter output: 11 +4 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 1.5 kW 1410 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Price: per piece -Number: 3x available -Dimensions: 600/1000/H850 mm -Weight: 220 kg

Category: 401 filling machines
Latest update: 29.03.2024 add to watchlist
item-No.: 162905696

used

Seller: Exapro
Location: Land-fr
Price: 12.000 € add to watchlist

Hello; We are selling our beautiful dispenser that fills all types of liquids (compote - alcohol etc.) quickly and efficiently. This dispenser can be used to fill all types of liquids and containers. The setting is very simple to operate. The machine is made of stainless steel and is very durable. NEAR MINT CONDITION The Professional kit includes : -Compressor (lowered machine kit): Ideal for not carrying your kegs. Angled outlet with anti-drip system. -Pneumatic pedal (for fast, efficient work). -Adjustable stainless steel tray. - Brand WEISSER -

Category: 102 lathes / CNC Turning Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163583112
New in: 2004

used

check Seller: Surplex GmbH
Location: Hornberg-Niederwasser Land-de
Price: used machinery auction RESALE 4.500 € add to watchlist

Description: Machine number: 177055919 Control system: SIEMENS SINUMERIK 840 D Chuck diameter: max. 210 mm Turning diameter: 400 mm Workpiece length: 120 mm X-axis travel path: 1130 mm (total travel path) X-axis travel path (working path): 400 mm Z-axis travel path: 280 mm Rapid traverse X-axis: 60000 mm/min Rapid traverse Z-axis: 30000 mm/min Motor spindle: Spindle diameter in the front bearing: 90 mm Spindle speeds: Rotating spindle speed range infinitely variable: max. 6000 rpm Disk turret with holder for driven tools: 8 pieces Shank diameter: 40 mm Spindle speed: max. 4000 rpm Torque: max. 50 Nm Working range with vertical drilling spindles Number of drilling spindles: 3 Spindle speed: max. 5000 rpm Drive power: 16 kW Torque: max. 83 Nm Incl. 8-station tool turret and a power chuck (diameter: approx. 250 mm) from the manufacturer SMW Incl. conveyor station from the manufacturer SCHNA ...

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163589835
New in: 1970

used

check Seller: Surplex GmbH
Location: Velen-Ramsdorf Land-de
Price: used machinery auction RESALE 2.900 € add to watchlist

Description: Lead and feed spindle lathe - 3-jaw chuck 260mm - 4-fold steel holder - Coolant system - live center Turning diameter over bed 500 mm Turning diameter over support 250 mm Turning length 1200 mm Speed 7.1 - 1400 rpm Center height 250 mm Spindle bore 49 mm Total power requirement 7.5 kW Machine weight approx. 3.9 t Space requirement approx. 2.85 x 1.3 x 1.6 m weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,850 x 1,300 x 1,600 mm

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163674272

used

check Seller: Surplex GmbH
Location: Etten-Leur Land-nl
Price: used machinery auction RESALE 8.500 € add to watchlist

Description: SPECIFICATIONS Character: White Heilbronn Type: Gigant Distance between centers: 2,500 mm Height between centers: 530 mm Turning diameter above the bed: ø1,060 mm Turning diameter above the base: ø700 mm Door outlet: ø102 mm Specs 3-claw chuck 4-jaw chuck Brand 4-claw: Forkardt PSA900 weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,100 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
WEISSER EUGEN 3rd category level
  • WEISSER EUGEN rotating benches (1)
 
RESALE used machinery 25 years online