used WALDRICH Roll Grinding Machines

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL *MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 5 ...

This WALDRICH Coburg 30-15 S 3030 Grinding machine was manufactured in 1971 in Czech Republic. It has a travel range of (X) 5.400mm, (Y) 1.700mm, (Z) 1.545mm. Its table is 5,540mm x 1,500mm. It comes with a maximum grinding length of 6,000mm, width of 1,700mm, and height of 1,545mm. Contact us anytime for further information.

Technical data: max. grinding length: 4300 mm max. grinding diameter: 800 mm Grinding wheel dimension: 700x70x305 mm max. workpiece weight: 10 to. Grinding spindle Speed: 650-1300 rpm

Waldrich-Coburg leadership roads and surfaces sanding machine type: 0-15 SNC 2520 X/3 m Max.-Schleiflaenge: 3420 mms Max.-Schleifbreite: 1450 mms Max.-working height: 1005 mms Aufspannflaeche length: 3000 mms Aufspannflaeche width: 1250 mms accessories: -table fine adjustment -Papierbandfilter-Anlage -Schipmke-Haan DK150 V - back chill arrangement surface need: L=11,8m B=4,9m H=4,7m weight: 29.4 to . their prize image we await with pleasure. OTHER: the machine still stands live and can be visited any time.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Distance between uprights: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 8000 mm Table width: 2800 mm Travels: Y axis: 9000 mm Z axis: 1250 mm W axis: 2200 mm Distance table to spindle max.: 2806 mm Distance between columns: 3200 mm Table load max.: 64000 kg Taper in spindle: 60 ISO Spindle speeds: number (steps): 16 from: 20 rpm up to: 600 rpm Feeds: X axis from: 5 mm/min up to: 3000 mm/min Y axis from: 5 mm/min up to: 3000 mm/min Z axis from: 5 mm/min up to: 2000 mm/min W axis from: 5 mm/min up to: 750 mm/min Creep speeds: X axis: 5 - 3000 mm/min Y axis: 5 - 3000 mm/min Z axis: 5 - 2000 mm/min W axis: 5 - 50 mm/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 100 kW Overall dimensions about: Length: 21000 mm Width: 7800 mm Height: 6622 mm

Table length: 12000 mm Table width: 4770 mm Longitudinal X: 12000 mm Cross Y: 5300 mm Vertical Z: 4000 mm Positions ATC: 0   Distance between uprights: 5000 mm CNC Brand: Siemens CNC Model: 840 D

CNC Gantry Type Milling Machine for extra large workpieces. Manufacturer Waldrich Coburg. Model S 22-10 GM 500 NC/16 m. Year 1989. Overhauled/Modernised/Retrofitted 2008. Control Siemens 840D control retrofitted. Table size 15000 x 5000 mm. Table load max. 15000 kg/m². Distance between the columns: With column covers 5800 mm. Without column covers 6000 mm. Distance spindle to table max. 5000 mm. Travels: Gantry longitudinal travel X 16000 mm. Saddle cross travel Y 6800 mm. Milling ram vertical travel Z 2000 mm. Crossrail vertical travel W 3400 mm. Milling spindle Ø front 200 mm. Spindle motor rating 150 KW. Spindle speed range 6 - 750 rpm. Gear steps 2. Torque max. 12900 Nm. Spindle taper ISO 60. Ram section 630 x 680 mm. Proposal Number V(F)-6720

Inv. Num. : 7015 Type: 17-10 FP NC/5 Producer: Waldrich Coburg Created: 1985 GO 2011 Parameters: 3D control system: Siemens Sinumerik 840 Table length: 5000 mm Table width: 2500 mm Max. workpiece weight: 60 t Weight: 125 t GO: 1997 2008 2011

WALDRICH COBURG 17S-10 FP 300 NC gantry milling machine built in 1989 in Germany is used for machining oversized workpieces, as well as many smaller workpieces at the same time. The machine equipped with a stable work table and indestructible components, allows for performing tasks such as milling, drilling and threading with the utmost precision, guaranteeing maximum process optimisation in a wide range of industries. Workpieces with a maximum weight of 60 tonnes are machined in five axes (X,Y,Z,W,C) using tools taken from a chain magazine located on the left side of the machine. This process is fully automated thanks to the special systems in the magazine responsible for automatic tool change and clamping. The WALDRICH COBURG CNC gantry milling machine is also equipped with a reliable spindle, additional angle milling heads (2 rotary heads, 1 Fork type head) and an intuitive SIEMENS ...

Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960

Hydraulic Single Planing Machine Fabr. WALDRICH COBURG Type 2E 1515Com. -No: 2110108 built in 1966combined gantry and milling machine with removable milling attachmentPlaner length: 2000 mmPlaning width: 900 mmPlaning height: 750 mmTable surface: 2000 x 650 mmpermissible workpiece weight: 1550 kgmilling head11 spindle speeds: 112 - 1120 rpmPower: 1.5 kWSpeed: 960 rpm.Tool holder: MK 3Max. Cutter diameter: 63 mmAxial adjustment of the milling head: 130 mmVertical adjustment: 170 mmAdjustment of the milling head on the boom: 630 mmtable driveMotor power of the feed pump: 3 kWFeed rates stepless Flow: 10 - 4200 mm / minReturn: 10 - 2800 mm / minCreep speed: 5 mm / minLongitudinal adjustment: 2000 mmWith- milling attachment- Sanding attachment- Planing steel holder- swiveling control panel- rapid traverse- mot. transom height adjustment- Separate control cabinet- hydr. speed adjustmentused,  ...

Description Waldrich Siegen CNC lathe for heavy machining Details Conversion to CNC 2006 Center distance 22,000 mm Maximum turning length Support 1: 20,000 mm Maximum turning length Support 2: 20,500 mm Largest turning diameter over support 1,600 mm Largest turning diameter above bed 2,000 mm Workpiece weight max. 70,000 kg Face plate diameter 2,000 mm Face plate speed, infinitely variable in 4 steps 1.2 - 75 rpm. Maximum torque at speed 5.65: 170,000 Nm Main motor 110 kW Largest clamping diameter on headstock ⌀ 920 mm Mounting in roller block (passable) 2 pieces 600 - 1290 mm Mounting in bezels (passable) 100 - 775 mm Control system Siemens SINUMERIK 840D Support 1 and 2 (to headstock) Displacement of the upper support 550 mm Displacement of the slider 400 mm Quick longitudinal adjustment (rapid traverse) 3,000 mm/min Q ...

Axis travel x = 3500 mm y = 1500 mm z = 1000 mm With positioner

x-travel: 9700 mm y-travel: 3500 mm z-travel: 640 mm w-axis: 3000 mm Control: Siemens type: 840D PL spindle diameter: 200 mm Spindle capacity: 85 Kw surface area: 9000x2800 mm Table load: 40000 kg high speed spindle taper ISO: 50 chip conveyor: coolant: total power requirement: kW weight of the machine ca.: 193,8 t dimensions of the machine ca.: 22,4x10,2x8,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 17700 mm y-travel: 4755 mm z-travel: 800 mm milling width: 3450 mm distance table - vertical milling spindle: 3682 mm table height over floor: 500 mm spindle diameter in front bearing: 200 mm turning speed range: 12 - 450 U/min tool taper: ISO 60 axial adjustment of the spindle slide: 800 mm creep feed: 5 und 50 mm/min feed stepless: 10 - 3000 mm/min cross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min vertical adjustment of cross beam: 3682 mm rapid traverse: 1,5 m/min creep feed: 1,25 und 12,5 mm/min feed stepless: 5 - 1500 mm/min table-size: 17800x2800 mm column daylight: 3600 mm Control: SIEMENS 840 C table load: 50.000/100.000 kg drive of main spindle: 100 kW total power requirement: 170 kW weight of the machine  ...

turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 760 mm flange:: 500x500 mm Width of nail head: 230x170 mm tool adaptor: nach DIN power requirement: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Waldrich Siegen Ø 1900 x 7500 mm Distance between centers: 7500 mm Swing over bed: 1900 mm Swing over cross-slide: 1650 mm Power on main spindle: 150 HP

x-travel: 6600 mm y-travel: 3200 mm z-travel: 1000 mm w-axis: 1750 mm Control: Siemens 840 D column daylight: 2650 mm distance spindle nose and table: 2500 mm table surface area: 6400 x 2250 mm table load: 50 t tool taper: ISO 60 spindle turning speed range: 5 - 2000 U/min table feed: 10 - 15000 mm/min feeds crossrail-slide horizontal: 10 - 10000 mm/min feed: (W) 10 - 2000 mm/min spindle motor: 55 kW total power requirement: 85 kW weight of the machine ca.: 125 t dimensions of the machine ca.: 18 x 9,5 x 6,5 m Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg. indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - cool ...

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Built 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Spindle diam. 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Table 5.200x5.200mm, X travel 3.300mm max. loading 100 Ton Rotation 360.000° Floorplates 6.000 x 10.000mm Hydrostatic Many heads This machine was used in final cutting and boring, drilling of big vessel engine cylinder blocks in STX Engine. It can be done the straight and inclined direction drilling &boring. It means the spindle head can be tilted. It is very high accuracy machine. This machine is in assembled condition but not under power

x-travel: 6300 mm y-travel: 2200 mm workpiece height: 1835 mm Table area: 6000x1835 mm Rest: 2 Side head: 2 number of T-slots: 7 T-slot - distance: 240 mm T-slot - width: 28 mm bed length: 14650 mm column daylight: 2075 mm feed: 5-60 m/min workpiece weight: 15000 kg total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: 14,65x4,37x4,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the  ...

table diameter: 900 mm Table load: 3000 kg Daylight: 580 stroke: 95-800 mm total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg