used VOEST ALPINE WEIPERT Engine Lathes Sliding Surfacing And Screw Cutting Lathes

-Peak height 240mm -Peak width 1000mm -Control Siemens -Circular permes.about bed 490mm -Umlaufdurchmes.ü.Planschlitten 195mm -Crumpling 520mm -Spindeldurchmes.im in front. Bearing 100mm -Spindle bore 63mm -Torque 736Nm

turning diameter: 570 mm turning length: 2000 mm control: Siemens Sinumeric steady: chip conveyor: turning dia. in gap: 600 mm turning diameter over slide: 340 mm spindle bore: 63 mm Tool changer: total power requirement: 22 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5x1,5x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.

Key data: 550

Center height: 550 mm Center distance: 2500 mm Spindle bore: 128 mm Workload 4.500 Kg Flying in chuck 1600 Kg Swing over bed Ø:        1.100mm Swing over cross slide Ø:780mm DBC Turning Length:      2.500mm Spindle bore:            128mm Spindle power:           37kW Bed width:               600mm Tailstock spindle Ø:     125Ø Stroke pinole:           270mm Spindle taper:           6Mk Speeds / ranges:         900Rpm Length:                  4.800 mm  Width:                   2.200 mm  Height:          &nb ...

Center height: 550 mm Center distance: 3000 mm Spindle bore: 128 mm Swing over bed Ø:        1.110mm Swing over cross slide Ø:775mm DBC Turning Length:      3.000mm Spindle bore:            128mm Spindle power:           30kW Bed width:               600mm Tailstock spindle Ø:     125Ø Spindle taper:           6Mk Speeds / ranges:         1120Rpm Length:                  4.500 mm  Width:                   2.000 mm  Height:                  2.000 mm  Weight:                  ...

Specifications: Center width 1000 mm Center height 180 mm Spindle bore 52 mm Circumferential diameter over bed 380 mm Circulation diameter over support 185 mm Speeds from 24 - 2000 rpm Drive power 5.5 kW

This VOEST ALPINE WNC 500 S/1.6 Lathe was manufactured in 1992 in Austria. It is equipped with 2-axis (Z-travel 1715mm, X-travel 305mm), a SIEMENS SINUMERIK control. This machine stands out for its stability and is in well maintained condition with direct availabilty. See original tech specs attached.

Screen surface: 1000 x 3000 mm, semi mobile steel structure with discharge chutes

turning diameter: 570 mm turning length: 2000 mm control: centre height: 280 mm turning diameter over slide rest: 340 mm bed width: 350 mm spindle diameter: 100 mm spindle hollow: 63 mm transmission ratio: 2 spindle turning speed range: 1-2500 U/min quill stroke: 160 mm total power requirement: 15 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 2,75x1,65x1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic sheet metal shears make VOEST-ALPINE type BTHS 8 x 3150Fabr. -No: MBO-565Technical specifications:max.cutting length: 3150 mmmax.sheet thickness: 8.0 mmThroat: 300 mmInfinitely variable cutting length adjustment: 500 - 3150 mmStop adjustment range: 0 - 1000 mmWeight about 10.2 tDimensions approx: 3500 x 2300 x 1900 mmwith- motorized backgaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 4-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: greates pass round over bed: 750 mm swing diameter over bed slide: 670 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . centre distance: 2000 mm turning diameter: max. 570 mm spindle bore: 70 mm control: 805 weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1050 mm turning diameter: 380 mm centre height: 180 mm turning diameter over slide rest: 200 mm quill:: 4 MK quill stroke: 180 mm turning speeds: 33 - 1500 U/min number: 12 Drehz. bed width: 330 mm spindle bore: 52.0 mm adjustment range:: Ober 130 mm adjustment range:: Plan 330 mm tool adaptor: CAMLOCK GR 6 work height max.: 1060 mm total power requirement: 5.5 kW weight of the machine ca.: 1050 kg range L-W-H: 2000 x 850 x 1450 mm ** good / well-maintained condition (!!) Furnishing: - 3-jaw chuck Ø 200 mm (CAMLOCK GR 6) - MULTIFIX steel holder, with 4x inserts - robust, movable tailstock - rotating center punch tips - Food key - various other accessories - Coolant device - removable chip tray - rear splash guard - Connection cable + plug - Emergency stop button - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -92 ...

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

Voest DA180-52-800 - Universal lathe - the machine is completely revamped and as good as new - CE conformity - Sino SDS6-3V 3-axis position indicator - 3-jaw lathe chuck Ø 200 mm - Multifix Type B - Coolant device - Work area lighting Specification - Center width: 800 mm - Center height: 180 mm - Turning diameter over bed: 380 mm - Turning diameter via slide: 200 mm - Quill holder: MK4 - Spindle bore: 52 mm - Bed width: 330 mm - Speed levels: 12 - Speed range: 33 - 1500 rpm - Feed speed: 0.072 - 0.54 mm - Metric threads: 0.5 - 3.625 mm - inch thread: 7 - 46 tpi - Motor power: 3 kW - Voltage: 400V - Dimensions WxHxD: approx. 2100 x 1650 x 1050 mm - Weight: approx. 1200 kg

Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.

Universal radial drilling machine make VOEST type AB 32Year of construction 1976Max. Drilling capacity ST: 50:32 mmMax. Drilling capacity: GG 20:40 mmDrilling ST / GG: 50/60 mmDrilling depth: 180 mmSpindle mount: MK 4Height adjustment of the boom: 610 mmProjection of the jib: 1000 mmTable surface: 1120 x 800 mm8 spindle speeds: 20 -3 000 rpm.3 automatic feeds: 0.05 / 0.1 / 0.2 mm / revDrive power: 1.5 kWWeight with base "940 kgWith- 3 automatic feeds- mot. boom stroke- Swing arm 360 °- Drilling head swiveling + 90 ° to -90 ° in the verticalxa0xa0 all 15 ° indexable, swiveling, adjustable and rotatablexa0xa0 (see brochure)- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always availabl ...

Four - jaws flat disc with individually adjustable clamping jaws. Diameter: 400 mm. High, without jaws: 100 mm, with jaws: 155 mm. Through hole: 90 mm. Chuck flange: DIN 55027, Size: 6 with 4 bolts, 21.5 mm with M 12 nuts and clamping wrench Good cleaned and ready for use condition. Weight: approx. 45 kg. Shipping with forwarding possible. The part was mounted on a VOEST lathe, type: DA 210 - 250. The Planchine can be visited in consultation and is immediately available. Please also note my other entries.

Key data: 120 mm, 60 mm, 1000 mm

Voest lathe in very good condition. Enormous amount of spare parts and additional parts included. Delivery possible immediately.

Description: Speed: 14 - 1000 rpm Center length: approx. 1000 mm Center height above bed: approx. 200 mm Turning diameter over bed: approx. 400 mm Center height above support: approx. 120 mm Turning diameter above support: approx. 240 mm The machine is equipped with a tailstock, a steel holder and a three-jaw chuck Diameter: 160 mm Spindle clearance: approx. 53 mm weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 950 x 1,600 mm

Description: Turning length: 1000 mm Turning diameter over support: 240 mm Approx. Onsite Dimension. (l x w x h): 2,400 x 800 x 1,400 mm, weight approx.: 800 kg

Drilling and parting lathe make WEIPERT type WPBA 710Machine -No: 16717 built in 1961Technical specifications:Distance between centers: 2500 mmCenter height over flat track: 710 mmTurning diameter over bed: 730 mmBed width: 580 mmSpindle bore: 230 mm16 spindle speeds: 14 - 450 rpm.Drilling depth: 1200 - 5700 mmDrive power: 25 HPused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Voest Alpine Weipert NC 500S heavy duty lathe hydraulic steady Sauter toolchanger with 12 positions VDI-tooling Driven tools + C-axis Heidenhain manual Plus 4110 (retrofitted) Swing over bed: 540 mm Swing over cross-slide: 450 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 77 mm Power on the spindle: 35 kW Number of speeds: 11 > 4000 rpm Command: Heidenhain Manual Plus ACCESORIES: yes Toolchanger: yes Number of tools: 12 positions (driven)