Category: 1300 other machines and plants
Latest update: 27.09.2018 add to watchlist
approved
dealer
item-No.: 4005955

used

Location: Land-de
Price: VB 140 € add to watchlist

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

Category: 2500 miscellaneous
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 146140977

new

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de
VS

add to watchlist

Unused Compact Gully Sealing Pillow System Manufacturer Vetter For gullys from 30cm to 50cm diameter In a practical transport case Permissible operating overpressure 0.2bar Good oil and chemical resistance 2 pieces available. Protection of sewerage from hazardous substances. To stop dangerous liquids making their way through roads into the sewer system. Vetter Universal Gully sealing pads are immediately ready for operation. The sealing cushion is positioned directly in the drain of the gully and filled with air by means of the enclosed pressure bottle. As a result, the cushion presses against the drain walls and thus closes the drain. Special price

Category: 2500 miscellaneous
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 144050328
New in: 2005

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de
VS

add to watchlist

Cable length meter, -robust machine version, measuring wheel circumference 500, -with mech. Counter for 9999.99 m. measuring accuracy of 0.4%. -Number height 7. -Cable diameter 20-120mm Nudlmuhk With the electronic pre-selection counter as an accessory, the desired cable length can be preselected and the winding machine can be switched off. This machine does not have an official calibration.

Category: 1405 cranes
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163084595
New in: 2014

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 11.885 € add to watchlist

VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2

Category: 1405 cranes
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163084597
New in: 2014

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 11.885 € add to watchlist

VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2

Category: 1508 other forklift trucks
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163204666
New in: 2019

used

check Seller: Hinrichs Flurfördergeräte GmbH & Co.KG
Location: Land-de
Price: 350 € add to watchlist

VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2

Category: 1403 other storage equipment
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 158927366

used

check Seller: ATMH werkzeugmaschinen-Handel GmbH
Location: Wetter Land-de

add to watchlist

weight max.: 80 t clamping width: / mm length: 9300 mm height: 3500 mm Torque: 95000 Nm total power requirement: 15 kW weight of the machine ca.: / t required space: / m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1405 cranes
Latest update: 19.09.2022 add to watchlist
approved
dealer
item-No.: 159829659

used

check Seller: Michael Bergau Handelscom
Location: Land-de
Price: 700 € add to watchlist

Unused wall swivel arm with manual suspension from VETTER VETTER PW1.25-4.0 wall swivel arm Projection 4 meters Load capacity 125kg Manual suspension VETTER SiCO-HF 500 Daytime capacity max. 500kg Carrier width 50mm - 220mm Comes from company dissolution Viewing and pick-up possible The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Category: 1405 cranes
Latest update: 20.11.2023 add to watchlist
approved
dealer
item-No.: 160023059
New in: 2006

used

check Seller: Brand GmbH
Location: 01587 Riesa Land-de

add to watchlist

Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)

Category: 1405 cranes
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 160354042
New in: 1988

used

check Seller: FORMEX SK s.r.o.
Location: Land-sk
Price: 4.500 € add to watchlist

Type M, Factory No. 15864 Load capacity 3200 kg Projection 4000 mm UK beam 4820 mm YOC 1998 engine. Pan 360 degrees Chain hoist Liftket YOC 2014 type 3200/ 2-5/1,25 Factory No. E 33594 With motor. Chassis EF 320 , 24 V Prufbuch, acceptance examination etc. Crane was dismantled on 30.11.2022

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162093946

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 790 € add to watchlist

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,00 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 6.3 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162093947

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 590 € add to watchlist

Chain hoist VETTER KRANTECHNIK type SIcc1F Load capacity: 125 kg Lifting height: approx. 6 m ( chain length ) Lifting speed: 8,00 0 / 2.0 m/min load chain: 3.1 x 9.3SP connected load: 0.20 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.2 m cable approx. 7.9 m Mains connection cable used, tested ! Dimensions ( without cable ): 380 x 260 x 450 mm

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162093948

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 790 € add to watchlist

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,, 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 10.5 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162093950

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 790 € add to watchlist

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,, 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 8 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162093951

used

check Seller: Pagus Maschinenhandel Online Shop
Location: D - Sachsen , Hohenprießnitz Land-de
Price: 790 € add to watchlist

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,, 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 8 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Category: 705 pharmaceuticals and cosmetics machines
Latest update: 29.03.2024 add to watchlist
item-No.: 162770091
New in: 2018

used

Seller: Bischoff & Munneke GmbH
Location: Land-de

add to watchlist

• Belt width 100 mm, centre distance 500 mm • Conveyor belt speed infinitely variable • Height adjustable • Drive 240V/50Hz

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162814101
New in: 1981

used

Location: Land-de

add to watchlist

Column slewing crane, indoor crane, workplace crane -Manufacturer: Vetter, pillar slewing crane type M capacity 1500 kg -Base plate: Ø 695 mm - Projection: 5,140 mm -Total height: 5,605 mm -Hook height: 4,320 mm -Chain hoist: GIS 150/F -Main lift: 4 m/min -Fine stroke: 1 m/min -Chain length: 4900mm -Transport dimensions: 5420/1230/H1950 mm -Own weight: 1320 kg

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162814159
New in: 1979

used

Location: Land-de

add to watchlist

Column slewing crane, indoor crane, workplace crane -Manufacturer: Vetter, column slewing crane type M load capacity 1000 kg -Base plate: Ø 610 mm -Outreach: 4,960 mm -Total height: 5,570 mm -Hook height: 4,420 mm -Chain hoist: SWF 10/F with main and fine lift -Chain length: 4730mm -Transport dimensions: 5970/1870/H660 mm -Own weight: 1379 kg

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162815834

used

Location: Land-de
Price: 950 € add to watchlist

Intermediate plate for pillar slewing crane, crane foundation plate, indoor crane, workplace crane, crane foundation plate -Pillar slewing crane: intermediate plate/base plate, outside: Ø 1200 mm -Type: ST160 VP1200/DL530 422632 S235 JR -Thickness: 40mm -Bolt circle inside: Ø 530 mm -Outer bolt circle: Ø 1160 -Number: 2x foundation plate available -Price per piece -Weight: 388 kg

Category: 1403 other storage equipment
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163127293
New in: 1986

used

Location: Land-de

add to watchlist

Column slewing crane, hall crane, workplace crane -Manufacturer: Vetter, column slewing crane type M, load capacity 500 kg -Base plate: Ø 610 mm -Throat: 5,990 mm -Total height: 3,900 mm -Hook height: 2,960 mm -Chain hoist: Mannesmann Demag PK 2 NF -Main stroke: 5 m/min -Fine stroke: 1.25 m/min -Chain length: 3200 mm -Transport dimensions: 6500/1040/H1830 mm -Town weight: 810 kg

Category: 1405 cranes
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 163295454
New in: 2015

used

check Seller: FORMEX SK s.r.o.
Location: 56235 CIFER Land-de

add to watchlist

Height 390 cm Boom 400 cm Boom lower edge 310 cm Anchor plate - diam. 100 cm Chain hoist - Vetter, type SICH4F, lifting speed 8 / 1,3 m/ min used, complete. good condition Crane book, documents

Category: 706 beverage machines
Latest update: 09.02.2024 add to watchlist
approved
dealer
item-No.: 163323765

used

check Seller: Füllmeister GmbH & Co.KG
Location: Land-de

add to watchlist

Wet spent grain silo, Fabr. VetterTec, for 10 m³ net capacity, made of mild steel St 37-2, outlet hopper inclination 60°, with Discharge screw 3.0 m long, with control cabinet and remote counting device, standing on supporting structure, with Vertical ladder, Ø: 2,500 mm, cyl. Height approx. 2,000 mm

Category: 1900 general inventory
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163611126
New in: 2014

used

check Seller: Surplex GmbH
Location: Hüttwilen Land-ch
Price: used machinery auction RESALE 590 € add to watchlist

Description: Payload/vertical load 2000 kg, total weight 2700 kg, permissible axle/support load front 100 kg, permissible axle load rear 2700 kg Approx. Onsite Dimension. (l x w x h): 2,300 x 2,100 x 2,400 mm, weight approx.: 900 kg

Category: 1405 cranes
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163674107
New in: 2009

used

check Seller: Mieth Maschinenhandel
Location: Land-de

add to watchlist

Technical data approx.: - Load capacity 250 kg - E. chain hoist VETTER type SIXX2F - Lifting speeds 4 + 2 m/min - Projection approx. 4000 mm - Crane girder IPE 200 - Hook height approx. 2150 mm - Swivel radius 360° - Total height approx. 2780 mm - Stand area stand / bucket approx. 1050 x 1050 mm - Total length approx. 4600 mm - Total weight approx. 4200 kg

Category: 305 peripheral equipment (e.g. heating,cooling,drying) / Hot runner controllers
Latest update: 29.02.2024 add to watchlist
approved
dealer
item-No.: 159441190

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Hot runner control unit - DME (2 pcs.) Year of construction: * Description: 12 hot zones with cabling Price: On request

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online