used VEENSTRA Tube Bending Machines

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

* General * SKU298T695 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93549 * Main Features * MaterialMild steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Without mixing shaftcheck * Without stirring headcheck * Motorcheck 4 kW 380-660 Volt (Ex) * Speed mixing shaftmax. 295 rpm * MaterialMild steel * Information * Mounted on framecheck * Floorspace1x0,5 m * Total height3,3 m * Weight900 kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU298T696 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93550 * Main Features * MaterialStainless steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Paddle stirrercheck * Sizes stirring headdia. 730x60 mm * Motorcheck 4 kW 380-660 Volt (Ex) * Speed mixing shaftmax. 295 rpm * MaterialStainless steel * Information * Floorspace1x0,5 m * Total height3,3 m * Weight900kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU298T697 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93552 * Main Features * MaterialStainless steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Without mixing shaftcheck * Without stirring headcheck * Motorcheck 4 kW 380-660 Volt (Ex) * Speed mixing shaftmax. 140 rpm * MaterialMild steel * Information * Floorspace2x1 m * Total height3.3 m * Weight900 kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU298T698 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93551 * Main Features * MaterialStainless steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Paddle stirrercheck * Sizes stirring headdia. 730x60 mm * Motorcheck 4 kW 380-660 Volt (Flender ATB-Loher) (Ex) * Speed mixing shaftmax. 140 rpm * MaterialStainless steel * Information * Mounted on framecheck * With switchcheck * Floorspace2x1 m * Total height3.3 m * Weight900 kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue!!! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue!!! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm Tracto Technik - TUBOMAT 642 Tube bending center Ø 6 - 42mm bending / cutting / deburring / flairing MACH - ID 6326 Make: Tracto Technik Type: TUBOMAT 642 Max.Tube Ø    42 mm Min. Tube Ø     6 mm Max. Wall thickness       3 mm Max. Bending radius     180 mm Min. Bending radius      10 mm Max. bending length       3.000 mm Deburring attachment      Yes Sawing attachment          Yes Flair attachment               Yes Power                               1, ...

Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² � 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control

OSTAS ROUND BENDING MACHINE TYPE SMR 1070 x 96 - Capaciteite 1070 x 3 mm - Conisch walsen - Pathdraaibare bovenrol - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;

Crippa tube bending machine 955LE CNC tube CNC tube bender Ø30 x 2 mm (max. Ø55 mm) - Tube wall thickness – 2.0 mm (max. 2.5 mm) - Tube material - steel - Bend radius 72, 90, 100, 150 mm (max. 250 mm) - 3-axis bending It was never working – new, but the production year ca. 2015

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

OSTAS ROUND BENDING MACHINE TYPE SMR 1070 x 96 - Capaciteit 1070 x 3 mm - Conisch walsen - Wegdraaibare bovenrol - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Unbek. Type, YOC ca. 1990, Revision 2002 Specifications: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. Double-sided bending function - Hydr. Delivery ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. Voltage - Bending tools

Outside diameter maximum: 50 mm Inside diameter maximum: 6 mm Pipe length maximum: 4500 mm Angle degrees maximum: 0 Wall Thickness: 3 mm Transfluid - DB 648K Tube bender Ø 50 x 4500 mm MACH - ID 6314 Make: Transfluid Type: DB 648K YOP: 1998 Max.Tube Ø   50 mm Min. Tube Ø    6 mm Max. Wall thickness     3 mm Max. Bending radius    125 mm Min. Bending radius     10 mm Max. bending length     4.500 mm Power      1,5 kW Number of tools      2 Dimensions Length      5.600 mm Width         800 mm Height     1.550 mm Weight     700 kg

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5428 MAKE        ROUNDO KUMLA SWEDEN TYPE          r-6 / z-60 YOP            1993 SPECIFICATIONS Horizontal and vertical          H + V Shaft Ø      100 mm Number of rolls       3 Resistance moment         56 CM³ Capacity flat         125 X 20 mm Capacity Tube        115 X 6 Ø x mm Capacity HEA-Profile       240 mm Working speed         7 mm/min. Control         PS/R DIMENSIONS Length        2000 mm Width  ...

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5390 MAKE        Tracto Technik TYPE          TUBOMAT 642 YOP            2008 SPECIFICATIONS Max.Tube Ø        42 mm Min. Tube Ø        6 mm Max. Wall thickness         4 mm Max. Bending radius       84 mm Min. Bending radius        2 mm Bending length           3000 mm Deburring attachment          yes Sawing attachment          yes Flair attachment       yes Power                  ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5001 MAKE         COMAC Italia TYPE           3055 YEAR          1990 SPECIFICATIONS Power       15 kW Horizontal / Vertical / or H + V        H + V Shaft Diameter ø     120 mm Roll diamter ø       400 mm Resistance moment Cm      333 Cm3 Capacity IPN      240 x 106 mm Capacity  HEB        120 x 114 mm Capacity Tube walltickness x Ø  139 x 5 mm Capacity Flatt         125 x 25 mm Hydraulic / Mechanical       Hydraulic Working speed M/Min.2.5 + 7.5  ...

Outside diameter maximum: 105 mm Inside diameter maximum: 0 mm Pipe length maximum: 300 mm Angle degrees maximum: 0 Wall Thickness: 60 mm CNC Brand: _Unknown / Other MACH-id   4141 MAKE       PBT Swiss TYPE         25 YEAR       1999 - 635 uur SPECIFICATIONS Hydraulic / Mechanical         Hydraulic Horizontal / Vertical / or H + V        Horizontal Shaft Diameter ø    105 mm Shaft length            300 mm Working speed M/Min.        1 - 24 M/Min Capacity IPN          120 x 2000 mm Capacity HEB      140 x 3500 mm Capacity Tube walltickness x Ø    60 x 1000 mm Capacity Flatt        80 x 8 x 1000 mm Power  &n ...