used VEENSTRA Mandrel Pipe Bending Machines

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

* General * SKU298T695 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93549 * Main Features * MaterialMild steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Without mixing shaftcheck * Without stirring headcheck * Motorcheck 4 kW 380-660 Volt (Ex) * Speed mixing shaftmax. 295 rpm * MaterialMild steel * Information * Mounted on framecheck * Floorspace1x0,5 m * Total height3,3 m * Weight900 kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU298T696 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93550 * Main Features * MaterialStainless steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Paddle stirrercheck * Sizes stirring headdia. 730x60 mm * Motorcheck 4 kW 380-660 Volt (Ex) * Speed mixing shaftmax. 295 rpm * MaterialStainless steel * Information * Floorspace1x0,5 m * Total height3,3 m * Weight900kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU298T697 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93552 * Main Features * MaterialStainless steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Without mixing shaftcheck * Without stirring headcheck * Motorcheck 4 kW 380-660 Volt (Ex) * Speed mixing shaftmax. 140 rpm * MaterialMild steel * Information * Floorspace2x1 m * Total height3.3 m * Weight900 kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU298T698 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93551 * Main Features * MaterialStainless steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Paddle stirrercheck * Sizes stirring headdia. 730x60 mm * Motorcheck 4 kW 380-660 Volt (Flender ATB-Loher) (Ex) * Speed mixing shaftmax. 140 rpm * MaterialStainless steel * Information * Mounted on framecheck * With switchcheck * Floorspace2x1 m * Total height3.3 m * Weight900 kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU298T698 * LocationBarneveld * MakeVeenstra * TypeFSL-550-V * No.93551 * Main Features * MaterialStainless steel * Motor4 KW * Specified Features - Stirrer * Stirrercheck * Paddle stirrercheck * Sizes stirring headdia. 730x60 mm * Motorcheck 4 kW 380-660 Volt (Flender ATB-Loher) (Ex) * Speed mixing shaftmax. 140 rpm * MaterialStainless steel * Information * Mounted on framecheck * With switchcheck * Floorspace2x1 m * Total height3.3 m * Weight900 kg * ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Tubobend Type: 80 S 108 V Year of construction: 2000 Range: max. Ø 76.1 mm

- Working range pipe Ø 4 - 28 mm x 3 mm for steel - Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals - Pipe sliding length 3,000 mm - Electronic single-axis control / angle input - Bending radius max. 90 mm - Minimum quantities - Mandrel lubrication - incl. existing tools ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) - Weight approx. 600 kg - L x W x H approx. 3,800 x 600 x 1,100 mm - Incl. operating instructions and spare parts list

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

Manufacturer: Kottmann & Berger Type: BVA 3 Year of construction: 2001 Rated power: 5 kW Pressure: max. 6 bar Bending diameter (steel): 32 mm Bending radius: 1.5 x D – 2.5 x D Machine weight: 0,7 t

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Pipe thread rejects mandrel, thread mandrel LMW SCHMALKALDEN R1 1/2 Thread: R1 1/2 ( inch ) Outer diameter: Ø 47 mm mandrel length: 20 mm Total length: 114 mm used, tested ! Dimensions ( packaging ): 120 x 50 x 50 mm

Pipe thread rejects mandrel, thread mandrel LMW SCHMALKALDEN R1 1/4 Thread: R1 1/4 ( inch ) Outer diameter: Ø 42 mm Gauge mandrel length: 20 mm Total length: 115 mm used, tested ! Dimensions ( packaging ): 120 x 45 x 45 mm

Pipe thread rejects mandrel, thread mandrel LMW SCHMALKALDEN R1 1/4 Thread: R1 1/4 ( inch ) Outer diameter: Ø 42 mm Gauge mandrel length: 20 mm Total length: 115 mm used, tested ! Dimensions ( packaging ): 120 x 45 x 45 mm

Pipe thread rejects mandrel, thread mandrel LMW SCHMALKALDEN R1 1/4 Thread: R1 1/4 ( inch ) Outer diameter: Ø 42 mm Gauge mandrel length: 20 mm Total length: 115 mm used, tested ! Dimensions ( packaging ): 120 x 45 x 45 mm

Offer via gebr. Pipe separation and chamfering machine Fabr. GF Type AVM RA6 Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed Speed levels electronically 1 - 6 Power 1600W used, in good condition.

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

- Pipe diameter max. 76.1 mm - Pipe sliding length max. 4,500 mm - bending radius 200 mm - Bending direction right - electronic 1-axis control - Twist angle unit with stops - electronic display of rotation - electronic display of the longitudinal position - Mandrel lubrication man. - L x W x H approx. 5,700 x 850 x 1,150 mm - Weight approx. 1,700 kg