used VALETTE PANEL PRESS H Frame Drawing Presses

Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

C - Frame Pneumatic, Hydraulic Press Pressing force: max. 75 to. Control: STE 328-89-1 1/2'' complete. Table area: 996 x 695 mm. Installation height: max. 600 mm. Total stroke: 150 mm. Force stroke: 10 mm. Incl. 2 - hand control panel, protective device and documentation. Weight: 5700 kg. Abm. WxDxH: approx. 1300 x 1700 x 3700 mm. Good operational condition. The machine can be inspected and demonstrated under power in consultation and is immediately available. Please also note my other entries.

Hydraulic press ZHO700N Manufacturer: Presshydraulika Year: 2015 Nominal pressing force ... 700t Clamping table surface ... 2500x1500mm Plunger stroke ... 500mm Installation height ... 1200mm Pestle dimensions ... 2400x1000mm Distance between stand ... 2500mm Control Siemens Force of the lower ejection ... 234t Stroke of the lower ejection ... 200mm Machine weight ... 52000kg L x W x H ... 5150x2870x4710mm The machine is in good condition, possible to test under power.

: gebraucht : 2005 : 7289 : prompt, Zwischenverkauf v : Italien : 13800 € : 1 : 20 to : 550 mm : 370 mm : 110 mm : 5 - 75 mm : 160 1/min : 187 x 143 mm : 35 mm : 38 mm : 185 mm : 225 mm : 225 mm : 1,5 kW : 1050 mm : 1250 mm : 2100 mm : 1150 kg 2 V-guides Front and side table shielding by safety doors 2-hand control and foot pedal Clamping plate Thickness table and clamping plate 50/50 mm User Manual in German CE Declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydropneumatic mode of operation Max. punching height: 90 mm Resister stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

Used Mechanical C-Frame Press PRESSIX 130 ton used machine in excellent condition dimension table 700 x 1200 mm dimension ram 550 x 800 mm adjustable slide 110 mm

* General * SKU300U589 * LocationBarneveld * MakeKorsch * TypeEK 0 * No.K0000094 * Year of construction2001 * Main Features * Tablet Diameter20 mm * Specified Features - Single stroke tablet press * MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L), Tool steel 1.2721 * Single stroke tablet presscheck * Tablet diametermax. 20 mm * Filling depth0-20 mm * Die diameter20 mm * With filling shoecheck * With hoppercheck * Capacitymax. 3600 st. * With motor0,55 kW, 220/380Volt * With variable speed drive10-60 rpm * Information * Mounted on frameStainless steel cabinet * With switchcheck * With switchgearcheck * Weight180 kg * CEcheck * Floorspace0,74x0,46 m * Total height1,90m * Extra Specifications- with various press tooling - compression force indication Single stroke tablet pressesGeneric medicinesKorsch PressenPresses > Single stroke tablet pressesIndustries > Pharmaceutic ...

* General * SKU300U588 * LocationBarneveld * MakeKorsch * TypeXL 100-8-EUD * No.K1510018 * Year of construction2001 * Main Features * Tablet Diameter25 mm * Material * Specified Features - Rotating tablet press * Rotating tablet presscheck * Number of stations:1 * With punching dies8-10-12 * With key on punching diescheck * Tablet sizes13-16-25 mm * Filling depth0-6/6 mm: 4-10/10 mm: 10-16/16 mm * With motorcheck (2,2kW, 220-240/380-415 Volt, 1400 rpm) * With frequency controllercheck (20-120, 20-120, 20-60 rpm) * Capacity29.000-72.000-86.400 pc/h * With hoppercheck * Information * Mounted on framecheck * With switchcheck * With switchgearcheck * Weight960 kg * CEcheck * Floorspace1,6x0,7 m * Total height2 mRotating tablet pressesKorsch PressenPresses > Rotating tablet pressesBrand > Korsch Pressen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

Key data: 72 kN, 60 mm, 200 mm

Very neat C-column press from TOX Pressotechnik Very good condition,

Profile height max. 160 mm Resistor stroke 100 mm Punching stroke 20 mm Pressing force 35 kN Compressed air connection 6-8 bar Weight approx. 350 kg

Hydropneumatic operation Profile height: 150 mm Max. hole height: 120 mm Resistor stroke: 100 mm Punching stroke: 18 mm Press force: 28 kN at 8 bar Max. profile height: 100 mm Weight: approx. 250 kg

Press capacity: 100 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 800 x 500 mm Slide area: 800 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 160 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1600 x 1700 x 2930 mm Weight of machine approx.: 5,5 ton

Press capacity: 60 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 3,5 ton

Press capacity: 30 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 2,5 ton

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. Th ...

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Underfloor circular saw for aluminum made by EMMEGI type 500 SCAMasch. -No: 191446, year of construction 1987Technical specifications:max saw blade diameter: 500 mmSpeed: 2890 rpm.Cutting capacity 90 ° e.g.: 170 x 150 mmor e.g.: 100 x 250 mmCutting area 45 ° e.g.: 170 x 165 mmor e.g.: 130 x 150 mmCutting area 20 ° e.g.: 150 x 60 mmor z. W .: 90 x 90 mmWeight approx: 520 kgDrive power: 4.0 kWWith- Minimum quantity spraying device- 2 vertical clamps- Miter cutting deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Press-Vite Buegel / Steam table 4 whirlpool hoods, 9000W Bj .2002, Pr12LP+ You buy a bell system Press Vite Buegel- / Steam table,with 4 hoe-adjustable whirlpool hoods, and 2 steam generators /en working width approx. 340 cm, 380VPr12LP - 9000W Bj 23.10.2002 Control GE VAT20 U20NOK7S BJ. 16.02.2002 Article number 17746; Please include requests;