used VILLA Veneer joining machines

Manufacturer: Villa Model: NPO 120 Year of construction - 2002 Forming Area:: 560x500mm Film Width: 560mm Foil thickness: min 0,2mm - max.0.9mm Depth of draw pos/neg: 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use Location: Bucharest, Romania, 050192 Other details: - forming - cutting - the documentation in original + scan pdf. - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - cycle time: min 5, max 18/minut - weight of the machine ca.: 1,2 t - space requirements of the machine approx.: 5,3x2,5x2,5m

Villa BR1510 thermoforming machine 1500 x 1000 h 650 mm just overhauled any tests double trolley ceramic resistors vacuum pump included computer for saving recipe/customer data possibility of training against operator billable in full + VAT

Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used ...

CROSS-FEED SPLICER Manufactured by Fisher+Rückle Type: CROSSMASTER Model: FZR

Veneer splicer KUPER model FW1150 used

CROSS-FEED SPLICER Width: 3400 mm

CROSS-FEED SPLICER Width: 3400 mm

Longitudinal Splicer Manufactured by FISHER+RÜCKLE

Longitudinal Splicer Manufactured by FISHER+RÜCKLE

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

SPECIFICATIONS: working length mm: 630 Dimensions of the workbench mm: 700 x 380

SPECIFICATIONS: Machining max. mm: 1000 Veneer thickness mm: 0.4 - 2 Installed capacity KW: 0.5

SPECIFICATIONS Max. working length mm: 1150 Operation with wire

SPECIFICATIONS: Min. length of veneer strip: 350 mm Min. width of veneer strip: 45 mm Veneer thickness: 0.3 - 1.5 mm Working height: 970 mm Temperature control: 0 - 200° C

Veneer splicer Kuper FM Mini 630 T The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Veneer splicing machine Kuper type FW 1200 E Specifications: • Adhesive medium: glue thread

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 1 spool of glue thread Threader Release The machine is set. You can get started right away. CE Mark Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Proven veneer spacing machine, veneer sewing machine from Kuper FWJ920 Veneer thickness approx. 0.3 - 2mm Feed speed approx. 15 m/min Projection 920mm Power connection 380V / 0.45kW Automatic start via contact brush, interruption via foot pedal 1 spool of glue thread Threader Release Operating instructions The machine is set. You can get started right away. Original paint, only a few paint spots touched. Pressure reducer and all V-belts renewed Dimensions approx. 1350 x 500 x 1750mm (LxWxH). Weight approx. 185kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 3 spools of glue thread Threader Release The machine is set. You can get started right away. Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock

to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm

to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm

Manufacturer: Fraxinus - Desco , Year: 2008, Superordinate control: yes, Cycle performance units/min: 5, Work piece width min-max mm: 155-1070, Min.-max. workpiece length in mm: 482-3000, Min.-max. workpiece height in mm: 18-250, Vorschub der Montage m/min: regelbar, Roboterbeschickung für Pappe: yes, Stacking locations: 3, Ausrichtlineal Montagelinie: yes, Length of wrapping belt mm: 25000, Roboteraufstapelanlage: yes, Stacking locations: 3, Carton at pallet: yes, Stacking patterns possible: yes, Discharge station: 1, Einschleussstation: yes, Packing belts: 1, Automatic carton sealer: yes, Folieneischlagstation : yes, Folienbreite max mm: 1500, Foleinschrumpfanlage: yes, Stacking robot: yes, Stacking locations: 2, Pallet buffer: yes, Automatic pallet wrapper: no, Pallet buffer: yes, Feeding speed adjustable: yes, Feed out conveyor for pallets: yes, Sice - euro-pallet: yes, Belt width m ...