british flag
Resale Logo

VERTICAL LATHE used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information marine motors and industrial engines  NEGOMAT  http://www.zotoff.fr 
banner logo
start page > keywords VERTICAL LATHE > results
382 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125436636 102

TOSHULIN SKA-12 for sale
Vertical Turning Machines (Lathes)


used machine
 
2000
Price  
  ES   request
125459203 102

MORANDO KN 25 for sale
Vertical Turret Lathe - Double Column


faceplate diameter:2500 mmswing diameter:2700 mmturning height:2400 mmtable motor:80 kWtable rotation speed:1,24-112 U/mincross section of ram:250 x 250 mmTravel of Ram (vertical):1500mm und 1140 mmweight of the machine  ...
used machine
 
faceplate diameter:2500 mm
swing diameter:2700 mm
turning height:2400 mm
table motor:80 kW
table rotation speed:1,24-112 U/min
cross section of ram:250 x 250 mm
Travel of Ram (vertical):1500mm und 1140 mm
weight of the machine ca.:48 t
chip conveyor:
grinding attachment:2
Boring bar holder:
turret:
Rams:2 Stück CNC gesteuert
operator platform:

Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer
1971
Price  
    request
125421720 102

RAFAMET KCF 200 for sale
Carousel Turning Machines (Lathes)


Carousel lathe RAFAMET NCC 200 built in 1963. The machine is accurate, recommended for heavy machining. The lathe had a full service. Characteristic data of the RAFAMET KCF 200 lathe: - turning diameter: 2400 mm (wid ...
used machine
 
Carousel lathe RAFAMET NCC 200 built in 1963. The machine is accurate, recommended for heavy machining. The lathe had a full service.

Characteristic data of the RAFAMET KCF 200 lathe:
- turning diameter: 2400 mm (widened from 2250 mm)
- turning height: 1250 mm
- extension of the vertical slider: 1000 mm
- engine: 45 kw
- dimensions of the machine: 6100 x 5000 x 5500 mm
- weight: 50 tons

Advantages of the lathe:
- new bearings
- new oils, cleaned filters
- new hydraulic hoses
- the lead screw nuts mentioned
- calibration
- has DTR: full technical documentation in Polish
- a full machine service was performed
1963
22,000 €  
  PL   request
125364949 102

JUGENTHAL DKE 1200 for sale
Single column - vertical turret lathe


Location: Kreuztal Technical data: -maximum turning diameter 1300 mm -Faceplate diameter approx. 1000 mm -maximum workpiece height -Travel support level 900 mm -Travel support vertical 700 mm -Maximum distance ...
used machine
 
Location: Kreuztal

Technical data:

-maximum turning diameter 1300 mm
-Faceplate diameter approx. 1000 mm
-maximum workpiece height
-Travel support level 900 mm
-Travel support vertical 700 mm
-Maximum distance of faceplate to bottom edge of chisel holder 700 mm
-Maximum distance of faceplate to bottom edge of Crossbeam 1100 mm
-Faceplate speeds 10-330 U/min
-2-axis digital display - main drive approx. 400 V / 35 kW
-Space requirement approx. B 2500 x H 3650 X 2400 mm
-Weight approx. 15000 kg
1957
Price  
    request
125374627 102

CONDOR KROMERIZ STANKO 1516 for sale
Carousel Turning Machines (Lathes)


Maximum diameter of folding support: 1600mm Maximum turning diameter by side support: 1600mm Maximum workpiece height: 1000mm Max. workpiece weight at revolutions of the clamping plate 4-125ot / min 6000kg  ...

 
Maximum diameter of folding support: 1600mm
Maximum turning diameter by side support: 1600mm
Maximum workpiece height: 1000mm
Max. workpiece weight at revolutions of the clamping plate 4-125ot / min 6000kg
150-200ot./min. 2400 kg
Number of steps for horizontally adjusting the support: 18
Feed rate range for adjustment: 5-1840 m.min
Number of slides for slide: 18
Slide displacement range: 0.03-12.5mm / revolution of the clamping plate
Number of positions of the turret head: 5
 
Price  
  AT   request
125364950 102

SCHIESS DKE 150 for sale
Single column - vertical turret lathe


Technical data: -maximum turning diameter ca. 1600 mm -Face plate diameter 1500 mm -largest faceplate turning altitude 1100 mm - travel support level 900 mm -Travel support vertical 1100 mm -Maximum distance of fa ...
used machine
 
Technical data:

-maximum turning diameter ca. 1600 mm
-Face plate diameter 1500 mm
-largest faceplate turning altitude 1100 mm - travel support level 900 mm
-Travel support vertical 1100 mm
-Maximum distance of faceplate to bottom edge of chisel holder 750 mm
-Maximum distance of faceplate to bottom edge of Crossbeam 1100 mm
-The numbers of revolutions of the face plate 6-100 U/min
-Feeds horizontal and vertical 0.15-5.7 mm / min
-Rapid traverse support + cross
-biggest weight of the work stueckes 5000 kg
-2 axes - digital display - main drive 400 V / 30 kW
-Space requirement approx. B 2500 x H 3650 X 2400 mm
-Weight 16000 kg
1974
Price  
    request
125355422 102

DÖRRIES NEMA 1100 for sale
Vertical lathe Single Columns


Table dimensions: 1100 mm Max. Speed: 1400 rpm Weight: approx. 10000 - 12000 kg

 
Table dimensions: 1100 mm
Max. Speed: 1400 rpm
Weight: approx. 10000 - 12000 kg
 
Price  
    request
125364951 102

JUGENTHAL DKE 1200 for sale
Single column - vertical turret lathe


Location: Kreuztal Technical data: -maximum turning diameter 1300 mm -Faceplate diameter approx. 1000 mm -maximum workpiece height -Travel support level 900 mm -Travel support vertical 700 mm -Maximum distance ...
used machine
 
Location: Kreuztal

Technical data:

-maximum turning diameter 1300 mm
-Faceplate diameter approx. 1000 mm
-maximum workpiece height
-Travel support level 900 mm
-Travel support vertical 700 mm
-Maximum distance of faceplate to bottom edge of chisel holder 700 mm
-Maximum distance of faceplate to bottom edge of Crossbeam 1100 mm
-Faceplate speeds 10-330 U/min
-2-axis digital display - main drive approx. 400 V / 35 kW
-Space requirement approx. B 2500 x H 3650 X 2400 mm
-Weight 16000 kg
1964
Price  
    request
125338859 102

FAMAR Pronto 6 for sale
Famar Pronto 6 Vertical Lathe


2008 powered Standard Chuck diameter [mm] 260 Maximum Chuck diameter [mm] 260 Rated turning diameter [mm] 180 Maximum working diameter [mm] 250 maximum turning diameter [mm] 350 maximum working length [mm] 200 Sp ...
used machine
 
2008
powered
Standard Chuck diameter [mm] 260
Maximum Chuck diameter [mm] 260
Rated turning diameter [mm] 180
Maximum working diameter [mm] 250
maximum turning diameter [mm] 350
maximum working length [mm] 200
Spindle Nose [ASA] 6
Front bearing Ø [mm] 110
Power [kW] 23.6
Rated torque [Nm] 146
Max. [Nm] 196
Max. [Rpm] 5300
type of tool [VDI] 40
Tools [No.] 12
Max. [KW] 12.5
Max. [Nm] 88
Max. [Rpm] 8000/10000
Maximum tool length [mm] 250
Tool change time [sec] 0.25
in excellent condition Machine available from July 2018
2008
Price  
  IT   request
125364048 0

SMTCL CAK6163D for sale
CNC Lathe


turning diameter:630 mmturning length:2850 mmcontrol:Fanuc 0i-mate MGI swing diameter over slide rest:350 mmbed width:550 mmspindle nose:D11/1:20 spindle bore:104 mmspindle speeds::17-1000 U/mintransmission ratio:autom.  ...
used machine
 
turning diameter:630 mm
turning length:2850 mm
control:Fanuc 0i-mate MGI
swing diameter over slide rest:350 mm
bed width:550 mm
spindle nose:D11/1:20
spindle bore:104 mm
spindle speeds::17-1000 U/min
transmission ratio:autom. 4-stufig
rapid power traverse in X-and Z direction:4/8 m/min
tailstock quill taper MT:5 Morse
Quill travel:200 mm
diameter of quill:100 mm
workpiece accuracy:6-7 ITF
x-travel:320 mm
z travel:3000 mm
chuck size:315 mm
dimensions:5200 x 1900 x 1900 mm
:6 t
power capacity:11 kW
CNC controller:FANUC 0i mate TC
3 jaw chuck Ø:315
technical documentation in German language:
hydr. tailstock quill movement:
steady rest:2 Stück
coolant system:
:
align center:
Tools:
live center:
center sleeve:
frequency control main spindel engine:11 kW
central lubrication:
CE-design:
workshop light:
turret:8-fach
hydraulic unit:
MPG hand wheel:
Machine semi-cover:

Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petroleum, military, among others. They are the preferred lathe among customers in China. This series of machine tools can be used in a wide range of applications, and can machine inside or outside surfaces of shaft-type work-pieces and disc-type workpieces, curved surfaces, arcs, threads, bores, and reaming holes, among other things. Various CNC systems and accessories can be provided according to the needs of the customer. This series of CNC lathes have horizontal flat-vee hardened guide-ways, with the undersides of slides coated with TSF anti-friction material, for flexible operation and stable and reliable accuracy. Key parts of the lathes are all hardened, and are designed to provide good rigidity to the cutting operation. The main motor is the variable-frequency (inverter) type, and this is combined with automatic hydraulic range change which allows any range of speed to be programmed. The tool turret is of the Hirth-style coupling type, which means that positioning of the tool-post in a rotary axis is accurate and repeatable. The feed system uses ball-screws with high accuracy drives and directly-coupled motors to eliminate error due to backlash of screws, gears or belts. The flat bed CNC lathe integrates mechanical, hydraulic, and electrical/control systems in a sleek, compact design. Because of its modular design, many different configurations can be selected by the end-user. Internationally-recognized control systems can be selected by the customer, such as FANUC, SIEMENS, SMTCL-NC-100, etc. Available tool-post configurations include vertical 4-station, vertical 6-station, and horizontal 6-station. Guarding is available either for semi-enclosed or fully-enclosed configurations. Manual or hydraulic chucks, and manual or hydraulic tail-stock options are available. Maximum turning diameter of parts is 630 mm. (CAK 63 series) or 800 mm. (CAK 80 series). Each series has a full complement of standard and available accessories and equipment. For machines whose maximum machining length is 1350 mm. or less, no steady or follower rests are provided. For machines whose maximum machining length is 2850 mm. or greater, roller-style rests are provided.
2005
Price  
    request
125323362 102  

STANKO 1525 for sale
Carousel Turning Machines (Lathes)


in working condiiton
used machine
 
in working condiiton
1986
Price  
  PL   request
125349378 102

HEGENSCHEIDT RQ for sale
CNC Vertical lathe


Weight approx.: 24000 kgDimensions (l x w x h) approx.: 7000 x 3000 x 3500 mmDescription: Turning diameter 1300 mm, work height 600 mm, for further details see pictures

 
Weight approx.: 24000 kg
Dimensions (l x w x h) approx.: 7000 x 3000 x 3500 mm
Description: Turning diameter 1300 mm, work height 600 mm, for further details see pictures
 
used machinery auction RESALE 19,800 €  
  NL   request
125242687 102

TOS SKJ 12 NC for sale
Carousel Turning Machines (Lathes)


Control system: NS361 Maximum workpiece height: 1150 mm Max workpiece diameter: 1400 mm clamping diameter: 1,250 mm Engine power: 40 kW Max. Workpiece weight: 6000 kg Machine dimensions: 2970x2770x4250 mm Machine ...

 
Control system: NS361
Maximum workpiece height: 1150 mm
Max workpiece diameter: 1400 mm
clamping diameter: 1,250 mm
Engine power: 40 kW
Max. Workpiece weight: 6000 kg
Machine dimensions:
2970x2770x4250 mm
Machine weight: 13000 kg
 
Price  
  AT   request
125349375 102

NORD PRODUCTIQUE BERTHIEZ for sale
CNC Vertical Lathe


Weight approx.: 18000 kgDimensions (l x w x h) approx.: 7500 x 5480 x 5100 mmDescription: Max. turning diameter 1880 mm, table 1600 mm, workpiece height max. 1600 mm, work piece weight max. 15000 kg, 12-x tool changer, f ...
used machine
 
Weight approx.: 18000 kg
Dimensions (l x w x h) approx.: 7500 x 5480 x 5100 mm
Description: Max. turning diameter 1880 mm, table 1600 mm, workpiece height max. 1600 mm, work piece weight max. 15000 kg, 12-x tool changer, for further details see pictures
1992
used machinery auction RESALE 7,300 €  
  NL   request
125242677 102

SEDIN 1516F1 (D1600x1000) for sale
Vertical turning lathe


Turning diameter: 1600 mm Table diameter: 1400 mm Max work-piece height: 1000 mm Max table loading: 8000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm  ...
used machine
 
Turning diameter: 1600 mm
Table diameter: 1400 mm
Max work-piece height: 1000 mm
Max table loading: 8000 kg
Max horizontal ram travel: 630 mm
Max horizontal carriage travel: 975 mm
Max vertical ram travel: 700 mm
Max vertical carriage travel: 1000 mm
No of feed carriages: 16
Carriages feed range: 0,07-12,5 mm/rev
Distance between table and ram: 0-1225mm
Fast stroke: 2000 mm/min
Main motor power: 30 kW
Speeds range: 4 - 200 rpm
Dimensions: 3190x3360x4100 mm
Weight: 19200 kg
1981
16,000 €  
  UA   request
125221234 102

YUSHINE VL-1600 ATC for sale
Vertical Turret Lathe


Weight approx.: 35000 kgDimensions (l x w x h) approx.: 5000 x 6300 x 5500 mmDescription: YUSHINE VL-1600 ATC Vertical Turret Lathe Technical data: serial number: YS-2611 diameter clamping plate 1,600 mm max. workpiece ...
used machine
 
Weight approx.: 35000 kg
Dimensions (l x w x h) approx.: 5000 x 6300 x 5500 mm
Description: YUSHINE VL-1600 ATC

Vertical Turret Lathe


Technical data:
serial number: YS-2611

diameter clamping plate 1,600 mm
max. workpiece diameter 2,000 mm
max. turning diameter 1,800 mm
max. turning height 1250 mm
max. workpiece weight 8000 kg

axis traverse path X: 1.200 / Z: 900 mm
speed 256 rpm
power 37/45 kW
tool changer 12-fold

with CNC control FANUC Serious 0i-TC chip conveyor
see photos for details
2008
Price  
  CH   request
125242674 102

SEDIN 1525 F1 (D2500x1600) for sale
Vertical turning lathe


Max. work piece diameter, mm 2500 Table diameter, mm 2240 Max. work piece height, mm 1600 Max. work piece weight, kg 16000 Table speed range, rpm 1,6...80 Quantity of supports: 2 Movement of vertical support, ...
used machine
 
Max. work piece diameter, mm 2500
Table diameter, mm 2240
Max. work piece height, mm 1600
Max. work piece weight, kg 16000
Table speed range, rpm 1,6...80
Quantity of supports: 2
Movement of vertical support, mm:
- vertical 1200
- horizontal 1390
Movement speed of vertical support, mm/min 5...1800
Max. swivel angle of support's slider, degrees 30
Main motor power, kW 45
Machine dimensions, mm 5065 x 5340 x 4190
Machine weight, kg 35500
1978
30,000 €  
  UA   request
125109726 102

STANKOIMPORT 1532 for sale
Double-Column Vertical Lathe


Weight approx.: 26000 kgDimensions (l x w x h) approx.: 6300 x 3400 x 5000 mmDescription: Faceplate diameter 2800 mm, 2 separately movable supports, workpiece height approx. 2200 mm, for further details see photos
used machine
 
Weight approx.: 26000 kg
Dimensions (l x w x h) approx.: 6300 x 3400 x 5000 mm
Description: Faceplate diameter 2800 mm, 2 separately movable supports, workpiece height approx. 2200 mm, for further details see photos
1983
Price  
  BE   request
125242326 102

COMEC THOR for sale
Vertical Lathe Double spindle


CNC Fanuc Max. rotating 380 mm Max. turning length 250 mm Max. turning length 200 mm Spindle distance mm 500 Spindle nose ASA 6 " Chuck diameter 250 mm 100 mm diameter front bearing Spindle speed 4000 mm Spindle ...
used machine
 
CNC Fanuc
Max. rotating 380 mm
Max. turning length 250 mm
Max. turning length 200 mm
Spindle distance mm 500
Spindle nose ASA 6 "
Chuck diameter 250 mm
100 mm diameter front bearing
Spindle speed 4000 mm
Spindle motor power kW 9/11
VDI30 Tower - 8 stations
1998
1998
Price  
  IT   request
125097703 102

GILDEMEISTER CTV 250 linear for sale
Vertical Turning Machine


turning diameter: 250 mmturning height: 300 mmControl: 840 D powerline Siemensaxis stroke:: x-axis: 1.100 mmz-axis: 300 mmy-axis: +/- 50 mmMain spindle:: turning speed range - main spindle: 25 - 5.000 min/-1power capa ...
used machine
 
turning diameter: 250 mm
turning height: 300 mm
Control: 840 D powerline Siemens
axis stroke::
x-axis: 1.100 mm
z-axis: 300 mm
y-axis: +/- 50 mm
Main spindle::
turning speed range - main spindle: 25 - 5.000 min/-1
power capacity - main spindel: 27 / 20 kW
max. Torque: 284 Nm
spindle head: 170h5
spindle diameter in front bearing: 120 mm
spindle bore: 79 mm
chucking diameter: max. 250 mm
turret::
number of toolpositions: 12 pos.
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity driven tool-stations: 11,7 kW
max. Torque: 28 Nm
Shank diameter: DIN 69880: 40 mm
work table::
surface area: 430 x 340 mm
T-slots: 4x 12H8 / 6x 14H8
feeds::
rapid traverse ( X / Y / Z ): 100 / 10 / 45 m/min
total power requirement: 42 kW
weight of the machine ca.: 8,0 t
dimensions of the machine ca.: 6,5 x 4,5 x 3,0 m
Documents:
Coolantsystem:
Chip conveyor:
Pallet pool:
Three Jaw Chuck:
CNC - Vertical Lathe
GILDEMEISTER - CTV 250 linear

- incl. pallet-handling-system
- Operating-Hours: Power-On: ca. 10.200h / Spindle-Run: ca. 5.200h
- WITHOUT Tools !



This ad was created with MODUL MWS - the software solution of LogoTech.
2008
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More VERTICAL models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Vertical Milling Machines DECKEL FP4A


OVERVIEW: Brand: DECKEL Model: FP4A Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 32000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 3000 mm Measurements depth: 2700 mm Measurements height: 1630 mm Machine weight: 1950 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 390 mm WORKPIECE: Workpiece drm: 80 mm Workpiece x: 485 mm Workpiece y: 385 mm Workpiece z: 380 mm Workpiece weight: 800 kg TABLE: Outer length: 900 mm Outer width: 530 mm TOOLS: Max weight: 450 kg Max tool diameter: 40 mm Max tool length: 150 mm MEDIA: Main electronic connection: 380 V Power consumption: 16.5 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 1x Tool holder

Vertical Machining Center WERNER PFZ 1500


X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

MILLING MACHINE FIL FIL FSM 300


MILLING MACHINE FIL FSM 300 Category: Milling Machine Type: mobile upright Brand: FIL Model: FSM 300 Capacity: 3500x1000x1250 mm Year built: 2008 FIELD WORK: Longitudinal (x): 3000 mm, vertical (y): 1250 mm Transverse ram (z): 1000 mm CNC CNC: Heidenhain TNC430 SPINDLE Spindle power: 30 kW Rotation speed: 10-3000 Rpm Taper: ISO50 FEEDS: Rapid x: 25 m / min, Rapid y: 25 m / min, Rapid z: 25 m / min ATC Locations: 24 Position: on mast PLAN OF ANCHORAGE Size (lxwxh): 3500x1000 mm Capacity: 15,000 Kg / m HEAD 1 Type: OVER Spindle taper: ISO50 Axle: 180 ° Max speed: 3000 rpm Machine weight: 24700 kg Fridge: yes

Vertical Milling Machines BRIDGEPORT TNC


General overhaul 2011 Manufacturer: BRIDGEPORT Technical parameters: - Table dimensions: 960 x 340 mm Control system: HAIDEINHAIN TNC 145

Carousel Turning Machines (Lathes) RAFAMET KCF 200


Carousel lathe RAFAMET NCC 200 built in 1963. The machine is accurate, suitable for heavy duty. Lathe was made full service. The data characteristic of lathe RAFAMET NCC 200: -turning diameter: 2400 mm (extended from 2250 mm) -height rolling: 1250 mm -slide the slider of a vertical: 1000 mm -engine: 45 kw -dimensions of the machine: 6100 x 5000 x 5500 mm -weight: 50 tons The advantages of the lathe: -New bearings -new oil, cleaned filters-new hydraulic lines -listed lead screw nut -calibration -It has DTR: full technical documentation in Polish language -made was full servicing of the machine

Vertical Numerically Controlled Machining Centres BMEI BV100


Vertical machining center BMEI BV100 built in 2007 year. Technical parameters of the moulder Center BMEI BV 100: -CNC control: FANUC Series Oi-MC

TEKNA TK419/4


3-axis CNC vertical machining center featured with a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system. The machining center is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions. It is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum and steel. To create programs that control the machines, Tekna provides user-friendly software tools that can be used both by professional CNC programmers, who can implement the most complex solutions, and by completely inexperienced users; after a few training hours the customer will be able to operate the machining center using a graphical programming. Software solutions offered by Tekna result from an accurate design and from the actual customer needs analysis. The simplicity of usage of these solutions reduces the management time and costs.

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

End Milling Machines Graule, Elumatec 2015


Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due to the wide stop plate Support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Minimum-volume lubrication system for saw blades Technical specifications Lower saw unit (vertical): Saw blade diameter 650 mm Tilting angle max. 45° towards front and 55° towards back, home position: Saw blade vertical Max. cutting height of 260 mm at 90° Max. cutting height of 187 mm at 135° Max. cutting height of 130 mm at 30° Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 1,400 rpm Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting angle max. 55° downwards and 60° upwards, home position: Saw blade horizontal Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 2,710 rpm Travel 950 mm Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position, 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Universal Milling Machines LAGUN FU 1600


Universal milling machine LAGUN FU 1600 was produced in 1990 year. Milling machine-specific data LAGOONS FU 1600: -table dimensions: 1600 x 340 mm -the scope of the work the longitudinal: 1150 mm -operating range: 330 mm -operating range vertical: 465 mm -speed range: 28/1400 RPM. -vertical feed: 12/800 mm/min. -feed: 6/240 mm/min. -tilting table: up to 45 degrees -Tools: ISO 50 -accelerators feeds

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

Vertical Numerically Controlled Machining Centres Dahlih DL-MCV 1020 BA


Make: Dahlih Model: DL-MCV 1020 BA Vertical Machining Centre Year: 2006 Condition: Used Machine type: Other Location of machine: UK Machine Details MAKE DAHLIH MODEL DL-MCV 1020 BA YEAR 2006 CONTROL FANUC 0i MC TABLE SIZE 1250 mm x 660 mm TRAVERSES X: 1020 mm Y: 550mm Z: 560 mm RANGE OF SPINDLE SPEEDS Upto 8000 RPM ATC 24 STATIONS SPINDLE TAPER BT 40 PLUS TWIN SCREW CONVEYORS COOLANT TRAY MACHINE MANUALS PRICE INCLUDES LOADING!

Self-Cleaning Disc Separators ALFA-LAVAL BRPX 417


Alfa-Laval Self-Cleaning Disc Separators for the food and beverage industry , high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted motor, via a belt drive

Injection molding machines BMB KW 20 PI/1300


Plastic injection molding machine BMB KW 20 PI/1300 produced in the year 2000 in Italy. Characteristics of injection molding machine BMB 1300/20 PI: -distance between columns: 560 mm-distance between columns in the vertical: 510 mm-max opening stroke: 600 mm -maximum weight of injection: ok. 500 g -screw diameter: 55 mm -clamping forces: 2200 kN

Vertical Bag Forming, Filling and Sealing Machine KOPP Speedpack Hybride


Foil: tubular foil/ reel bag, foil: PE, PAPE, OPP, composite foil, foil strength: 20-125µm, max. roll/ bag width: 400mm, max. output: 25bags/min, compressed air supply: 6bar, compressed air consumption: 200-500nl/min, length: 1000mm, width: 900mm, height: 1100mm, with touch screen.

Famar Pronto 6 Vertical Lathe Famar Pronto 6


2008 powered Standard Chuck diameter [mm] 260 Maximum Chuck diameter [mm] 260 Rated turning diameter [mm] 180 Maximum working diameter [mm] 250 maximum turning diameter [mm] 350 maximum working length [mm] 200 Spindle Nose [ASA] 6 Front bearing Ø [mm] 110 Power [kW] 23.6 Rated torque [Nm] 146 Max. [Nm] 196 Max. [Rpm] 5300 type of tool [VDI] 40 Tools [No.] 12 Max. [KW] 12.5 Max. [Nm] 88 Max. [Rpm] 8000/10000 Maximum tool length [mm] 250 Tool change time [sec] 0.25 in excellent condition Machine available from July 2018

CNC Milling Centers SW BA 25


The Centre of the vertical-spindle machining drilling mill SW BA 25 built in 1997. Technical data SW Center BA 25: -CNC control: SINUMERIK 840 SW3 -tool Magazine: 2 x 36 frames SK 40

Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year Steinecker Complete brewery


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment. Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left. For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs

Fermenting Tanks Vertical CCT 4 x 2650 hl Hinke kft, Hungary 2650 hl / 2500 hl - insulated


Fermenting Tanks Vertical CCT Hinke 4 x 2650 hl Tanks are made by Hungarian Hinke kft in. They are made on normal steel and special coated for this purpose, self-standing PU foam insulated and cooled with glycol-water solution cooling and they have 4 + 1 (cone) cooling zones. Operation control with Siemens S7 200 PLC with InTouch based on System Platform. We have 4 identical tanks, all equipment with CIP bowl, legs, service platform, vacuum and overpressure safety valves. Technical data: Volume Gross 2650 hl, net 2500 hl Made by Hinke kft, Number of tanks 4 Pressure 1.0 bar Insulation PUR foam 150 mm Cooling media Direct NH3 Number of cooling zones 4 + 1 (cooled cone) Diameter 4500 mm (4800 with insulation) Height 22480 (without legs) Weight 24400 kg

Fermenting Tanks Vertical CCT 20 x 1150 hl Hinke kft / Alfa Laval 1150 hl / 1000 hl


Fermenting Tanks Vertical CCT Hinke 20 x 1150 hl Glycol Tanks are made by Hungarian Hinke kft in year 1984. They are made of stainless steel, skirt supported, PU foam insulated and cooled with glycol-water solution and they have 4 cooling zones. Operation control with Siemens S7 200 PLC with InTouch based on System Platform. We have 20 identical tanks, all equipment with CIP bowl, service platform, vacuum and overpressure safety valves. Tanks have recently installed valve panels made by Alfa Laval. Technical data: Volume Gross 1150 hl, net 1000 hl Made by Hinke kft, / Alfa Laval Manufacturing year 1984 Number of tanks 20 Pressure 1.0 bar Insulation PU foam 150 mm Cooling media Glycol-Water Solution Number of cooling zones 4 Diameter 3500 mm (3800 with insulation) Height 14750 Weight 13250 kg

Fermenting Tanks Vertical CCT 10 x 2650 hl Hinke kft, Hungary 2650 hl / 2500 hl - NH3


Fermenting Tanks Vertical CCT Hinke 10 x 2650 hl - NH3 Tanks are made by Hungarian Hinke kft in year 1995-2000. They are made of stainless steel, self-standing (with legs) PU foam insulated and cooled with direct ammonia evaporation and they have 4 + 1 (cone) cooling zones. Operation control with Siemens S7 200 PLC with InTouch based on System Platform. We have 10 identical tanks, all equipment with CIP bowl, legs, service platform, vacuum and overpressure safety valves. Tanks are in good condition. Technical data: Volume Gross 2650 hl, net 2500 hl Made by Hinke kft, Manufacturing year 1995 Number of tanks 10 Pressure 1.0 bar Insulation PUR foam 150 mm Cooling media Direct NH3 Number of cooling zones 4 + 1 (cooled cone) Diameter 4500 mm (4800 with insulation) Height 22480 (without legs) Weight 24400 kg

Air Bottle 5 m3, 11 bar Otto Klen Gmbh,m Germany Steel tank for compressed air


Air Bottle 5 m3, 11 bar This vertical air bottle is designed to work in max 11 bar airline as an air accumulator. Bottle is made of normal steel and it is galvanized and in good condition Manufacturer German Otto Klen GmbH Manufacturing year 2007 Bottle volume 5000 liters Max. working pressure 11 bar Testing pressure 16 bar

Color Lid Printer POLYTYPE DDM 160/ 8


High-Performance Lid Printing System with automation for 1 man- operation. Automatic Infeed Conveyor to Feed Vertical Lid Stacks in-feed robot from stack reservoir to Denester Universal Screw Denester ARCOTEC Gas pre-treatment with pre-adjusted, automatically controlled gas-air mixture. Main 8-Color Print Unit Anti-ghosting inking units with fast removable, leak free ink fountains. Automatic cleaning of system rollers. Printing plate cylinder with quick locking device and micro-setting of the register for a fast reproduction. Cooling system for Fountain Rolls and 2 x oscillating rollers. No lid–no ink and no lid– no print system SIEMENS S7 PLC Controls Siemens SIMATIC PANEL OCP with Color Display. UVITERNO DBT 5545/ 1 UV-Tunnel, with 3 step switch (2/ 4/ 5.5 kW) * Real Time Camera with Display & Controls to recognize & automatically blow off faulty Printed Lids Horizontal lid re-stacker equipped with servo motor, exact lid counting and multi-stack delivery Conveyor. Data storage memory. Technical Data: Round lids: Min./max. rim diameter: 80 –180 mm Polygonal/ Rectangular lids: Min. rim dimension : 50 x 50 Max. rim dimension : 180 x 180 mm Min./max. lid height: 5/ 25 mm Max. printing speed up to (lids/h) : 30,000/ hr

Four-sided planing machines SCM COMPACT 23K


Moulding machine 4 spindle + neutral Scm Compact 23K composition: Bottom spindle kW 7,5 Right and left spindles one motor kW 7,5 Upper spindle kW 5,5 Neutral spindle kW 5,5 Max width of work (finished section) 230 mm Max height of work (finished section) 125 mm Diameter of spindle tools-holcer 40 mm Useful length vertical spindles 140 mm Useful length horizontal spindles 253 mm Length neutral spindle 230 mm

Numerically Controlled Machining Centres BIESSE ROVER C6.65R


Machining centre Biesse Modello Rover C6.65 R Software BIESSE WORKS Working field X mm 6200 Working field Y mm 1535 Working field Z mm 250 Work table with automatic adjustment of bars supports and sucker holder carriages 08 working areas 10 bar supports with 4 sucker holder carriages 40 Uniclamp sucker holder carriages Suction cups included: 06 of mm 140x75 20 of mm 140x140 10 of mm 140x55 18 Fittings blocks 01 Electro-spindle at 4 axels of 12 kW 01 boring head 22 spindles composed by 13 vertical spindle + horizontal spindle + 1 blade 03 Multi-function heads composed by: 01 Saw blade unit diameter mm 300 01 Boring unit at 6 counterposed bits 01 Milling unit at 2 exits Automatic chain Tool change at 22 positions installed on the machine Depression plant with vacuum pump of 250 m3/h Automatic centralized lubrication Shaving evacuation belt

Four-sided planing machines SCM SUPERSET XL


Moulding machine Scm Superset XL 5 shafts: Bottom kW 4 Right kW 5,5 Left kW 5,5 Upper kW 7,5 Bottom kW 4 Max width of work (finished sect.) 240 mm Min width of work (finished sect.) 25 mm Max height of work (finished sect.) 120 mm Min height of work (finished sect.) 6 mm Min length single piece 620 mm Diameter spindles 40 mm Useful length horizontal spindles 250 mm Useful length vertical spindles 140 mm Length entrance worktop 2500 mm Electronic programmer SPV232: n.99 programs of thickness and width positionning Automatic lubrication of the worktop

Vertical Milling Machines Deckel Maho Gildemeister DC 70 V


OVERVIEW: Brand: Deckel Maho Gildemeister Model: DC 70 V Application type: Milling Machine type: Vertical Machining Center Availability: Immediately Construction year: 1996 Production hours: N/A Spindle hours: N/A Location: Spain Origin country: Germany CONTROL UNIT: Brand: Dialog Model: 112 MOVEMENT: X-AXIS: Movement: 700 mm Working feed: 10000 1/min Rapid traverse: 30000 1/min Accuracy: 0,001 Y-AXIS: Movement: 550 mm Working feed: 10000 1/min Rapid traverse: 30000 1/min Accuracy: 0,001 Z-AXIS: Movement: 500 mm Working feed: 10000 1/min Rapid traverse: 20000 1/min Accuracy: 0,001

Vertical Milling Machines TOS FGV 40


External dimensions of the work table - width 400 mm - Length 1600 mm Clamping grooves "T" - Number 4 - Width x pitch 18x80 mm ISO 50 spindle spindle taper Spindle speed - number of degrees 18 - range 35.5-1800 / min Shifts - number of degrees 15 - longitudinal and transverse range 10-1250 mm / min - Vertical range 2.5-315 mm / min Dimensions - Length x width 3870x3160 mm

Universal Tool-Milling Machines DECKEL FP1 AKTIV DIGITAL


DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982: -3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm, -Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm], -Automatic strokes X : 290 ; Y : 160 ; Z : 330 [mm], -Sensitive drilling head type 2171 - stroke 100 [mm] - spindle ISO 40 - orientable -90° / 0° / +90°, -Horizontal spindle ISO 40, -Tilting swiveling table type 2114, -Horizontal table dimensions : 600 x 255 [mm], 5 T slots 12 [mm] -Vertical table dimensions : 605 x 195 [mm], 2 T slots 12 [mm], -16 different spindle speeds from 40 to 2000 [tr/min], -Variable power feeding from 5 to 500 [mm/min] in all 3 axis, -Rapid feeding in all 3 axis - 1200 [mm/min], -« Active » function controled by the HEIDENHAIN TNC 113 DRO in all 3 axis, Bcblv9kxbw -Coolant pump + LOC LINE coolant hose, -Centralised automatic lubrication, -Spindle electro-brake, -Electrical cabinet seperated from the machine, -Main motor power 2.0 kW, -Dimensions : Width 1200 ; depth 1100 ; height 1700 [mm], -Weight : 695 Kg approx. Original DECKEL operators manual, service manual and electric plans included. Machine in very good condition, visible under power. Loading included, shipping possible Worldwide. Price VAT Excl. on request. SARL Kraffter Lieu dit Le Sourd 73520 Saint Béron, FRANCE Tel: +33(0)6-73-30-03-87 VAT N°: FR 17 819 707 167

Vertical turning lathe SEDIN 1516F1 (D1600x1000)


Turning diameter: 1600 mm Table diameter: 1400 mm Max work-piece height: 1000 mm Max table loading: 8000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg

Vertical turning lathe SEDIN 1525 F1


Max. work piece diameter, mm 2500 Table diameter, mm 2240 Max. work piece height, mm 1600 Max. work piece weight, kg 16000 Table speed range, rpm 1,6...80 Quantity of supports: 2 Movement of vertical support, mm: - vertical 1200 - horizontal 1390 Movement speed of vertical support, mm/min 5...1800 Max. swivel angle of support's slider, degrees 30 Main motor power, kW 45 Machine dimensions, mm 5065 x 5340 x 4190 Machine weight, kg 35500

Vertical Milling Machines MORI SEIKI MV-Junior


OVERVIEW: Brand: MORI SEIKI Model: MV-Junior Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1986 Location: Hungary Origin country: Japan GENERAL DATA: Measurements width: 2250 mm Measurements depth: 2200 mm Measurements height: 2500 mm Machine weight: 3500 kg MAIN DRIVE: Spindle speed range: 150-6000 1/min CONTROL UNIT: Brand: FANUC Model: 10M MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 410 mm Z-AXIS movement: 460 mm TABLE: Outer length: 2250 mm Outer width: 2180 mm TOOLS: Max weight: 8 kg Max tool diameter: 80/125 mm Max tool length: 250 mm MEDIA: Main electronic connection: 380 V / 3 P Power consumption: 16 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Tools 2 - Tool trolley 3 - Power transformer

Vertical Lathe Double spindle COMEC THOR


CNC Fanuc Max. rotating 380 mm Max. turning length 250 mm Max. turning length 200 mm Spindle distance mm 500 Spindle nose ASA 6 " Chuck diameter 250 mm 100 mm diameter front bearing Spindle speed 4000 mm Spindle motor power kW 9/11 VDI30 Tower - 8 stations 1998

Measuring Machines POLI SPA


TYPE precision jig boring machine CROSS TRAVEL 1400 mm. AXIS X 3000 mm. 1600 mm VERTICAL STROKE. NOTES Plan 3000 x 1500 mm. -# 6 support columns and leveling

Binding machines HORIZON BQ-270


Automatic cover feeder 1 clamp Milling and roughening station Hotmelt gluing unit with dust extractor LCD touch Screen Vertical delivery Only 492 000 books ! Formats : 320x320 – 135x105 mm Book thickness : 1-50 mm Speed : 500 cycles/h Machine under maintenance contract.

Jackstone


Jacckstene vertical plate freezers.Details:Brand: Jackstone;Number of stations: 20 ;Number of blocks: 40Block size: 530 x 100 x 520 mm (L x W x H);Freezer dimensions: 3450 x 1600 x 1880 mm (L x W x H);Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us. In stock we have branded equipment e.g. Bitzer, Copeland, Carrier, Gram, Gea, Lu-ve, Dorin, Güntner.

Jig Grinding Machine HAUSER 3 SMO 560/400


Table size: 595x320mm, adjustment area: 400x250mm, grinding diameter: 220mm, grinding diameter with intermediate plate: 280mm, includud angle: 12°, vertical sledge stroke: 500mm, grinding motor table passage: 480mm, spindle vertical sledge distance: 310mm, vertical spindle stroke: 3-110mm, stroke speed: 5-330/min, grinding motor speed: 9000-80000/min, length: 1700mm, width: 1500mm, height: 2900mm, weight: 1.8t.

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

Milling machine FIL FA 160


milling machine FIL FA 160 1997 CNC SELCA 4045 X axis travel mm. 1600 Y axis mm. 800 Travel Z-axis 850 mm TABLE 1500 X 630 capacity flow rate of 1000 kg weight Rpm 2000 ISO BT 50 motor power kw 11/15 Vertical head swivel manually Front spindle Output Max tool diameter 125 mm Maximum tool length 300 mm maximum tool weight 15 kg

H-Frame Eccentric Presses AGOSTINO COLOMBO 2200 ton 800 tons + 630 tons


Line of 3 Mechanical Presses brand AGOSTINO COLOMBO complete of nr. 2 presses 800 tons and 1 press 630 tonsThe machines can be sold individuallyTechical data Agostino Colombo 800 TonsFront Light between uprights2000 mmNominal power800 Tons Dimension table 2000 x 1350 mmFixed stroke400 mmWorking frequency march continues22 cycles/1’Distance max table – ram1585 mmAdjustment mold vertical160 mmPassage between the colums900 mmBlank holder125 TonnStroke blank holder250 mmDimension blank holder1000x500 mmMotor power75 kwWeight100.000 KgYear1971Technical data Agostino Colombo 630 TonnFront Light between uprights1430 mmNominal power630 Tons Dimension table 1400X1350 mmFixed stroke400 mmWorking frequency march continues22 cycles/1’Light at closed ram802,5 mmAdjustment mold vertical15Passage between the columns1020 mmBlank holder20 ton Stroke blank holder250 mmMotor power55 kwWeight52.000 KgYear1971

Vertikal Turning Machines (Lathes) Sedin TKV 525


Make: Sedin Model: TKV 525 Year: 2014 Condition: Used Machine type: Mill Location of machine: Poland Control: CNC Siemens Sinumeric Service details: Full History Documentation / manuals included? Yes Is tooling / spares included? Yes Is the equipment viewable under power? Yes Machine Details CNC Double Column Vertical Lathe GORBREX model TKV525 ( built on the corp of SEDIN Lathe ) Manufacturer: GORBREX – Poland Model: TKV525 New in: January 01/2014 Condition : very good, under power Control: SIEMENS Sienumeric 840D Delivery time: immediately This VTL was built by our company in 2014 for our customers. At that moment he lost his job for this machine. That is why he wants to sell this machine. The machine was increased by the execution of cast iron carried out. Technical details : Table diameter: 2250 mm Distance between table and ram 0 - 1780 mm Distance between table and lower surface of transversal beam 400 - 2140 mm Workpiece : Max workpiece diameter 2500 mm Max workpiece high 2200 mm !!!! Max workpiece weight 16 000 kg Carriage : Max ram travel 1200 mm Max horizontal travel of carriage 1390 mm Max swivel angle manual +/-30 degrees Max distance between axis of ram 560 mm Max knife intersection 40 x 60 mm Seat diameter ( metric cone ) 80 mm Mechanical unit : Carriages number and type 2 vertical – ram (one is cnc controlled, second is conventional) Table speeds range 0-110 rpm Rapid feeds of carriage 10 - 1780 mm/min Transversal beam feeding 360 mm/min Motors and overall dimensions: Main motor 55 kW , Dimensions 5065 x 5480 x 4910 mm Machine weight 36 000 kg Collect-Deliver-Install Remove the stress & worry of collecting, installing and maintaining your machine. Not just a collection service, features can include... Decommission (pre-owned) Load & deliver to buyer's site Unload and site to install position Fully commission machine 1, 2 or 3 year parts and labour warranty (new) Full PUWER assessment 24 or 48 hour on site response Annual maintenance services Banked hours for all your CNC equipment

Bright Beert Tank BBT Holvrieka 400 hl Holvrieka, Denmark Vertical, insulated


Bright Beer Tank BBT Holvrieka 400 hl vertical insulated This BBT is made by Holvrieka in 2003. The tank has a special supporting skirt, normal vacuum and overpressure valves on the top and a CIP bowl inside. Tank is insulated (150 mm PU foam), and cover is gladded. Manufacturer Holvrieka Manufacturing year 2003 Vertical, insulated BBT Volume 400 hl (net), 410 hl (gross) Number of tanks available 2 Insulation 150 mm PU Cooling No cooling jacket Tank dimension Diameter 2.7 m, Height 11.8 m Weight 8700 kg

Copy Milling Machine ELUMATEC KF 78


Max. profile height: 60mm, milling range horizontal/ vertical: 180x70/ 300x95mm, stroke: 110mm, drilling/ milling speed: 6000/ 12000/min, compressed air supply: 7bar, length: 950mm, width: 850mm, height: 1550mm, weight: 270kg.

Automatic CIP Line Simonazzi Autosan R4 SIG Simonazzi refurbished in 2018


Automatic CIP Line Simonazzi Autosan R4 – refurbished 2018 This fully automatic CIP line was made by Simonazzi in year 2005 and it was totally refurbished in March 2018. All pumps, valves and instruments are thoroughly maintained, PLC controls was build totally new with Siemens Simatic S7 and touch screen operation. Equipment is today close to new condition. It has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. In addition, the system has tree additive dozing systems with special acid and alkaline proof dosing pumps and dosing tanks. Manufacturer. SIG Simonazzi Manufacturing year 2005 Model Autosan R4 Main tanks 4 x 6 m3 Serial number SAS 478 Number of circuits 2 Inverters made by Danfoss Touch screen Siemens HMI (new screen) Control PLC Simantic S 7-300 (new PLC) Video: abcs://youtu.be/-QscdXxHI24

Vertical Fermenting Tanks CCT 1300 hl Holvrieka, Denmark Insulated, 1.0 bar


Vertical Fermenting Tanks CCT Holvrieka 1300 hl Gross Tanks are made by Holvrieka in year 1998. They are self standing insulated and glycol cooled with 4 cooling zones. We have four identical tanks, both equipped with CIP bowl and in good condition. Techncial data: • Volume brutto 1300 hl, netto 1100 hl • Made by Holvrieka, Denmark, 1998 • Pressure 1.0 bar • Insulated, insulation PUR foam 150 mm • Glycol cooling 3 cooling zones on the body and cooled cone • Diameter 3550 mm, Total height 18100 mm, Weight 8 200 kg • Equipped with valves, sensors, sample valve, pipes, panels and service platforms • Two lifting hooks on top of CCTs for installation/dismantling

VERTICAL MACHINING CENTER for sale HAAS VF4 SS


The HAAS VF-4SS USED VERTICAL MACHINING CENTER 3 axis HAAS CNC YEAR 2012 X-Axis 50 "1270 mm Y-axis 20 "508 mm Z-axis 25 635 mm Table 1321 x 457 Length 52 "1321 mm Width 18 "457 mm Spindle-maximum power 30  ...
Get the latest machine offers by email: order newsletter