used VEB BLEMA Eccentric Presses

pressure: 160 t dayligth: - mm stroke: 8 - 160 mm table surface area: 900 x 900 mm cutting surface: 5500 mm² column travel -side: 560 x 560 mm distance between columns: 950 mm ram adjustment: 125 mm number of strokes - idle run: 42 min-1 table height: 800 mm clamping plate thickness: 100 total power requirement: 18,5 kW weight of the machine ca.: 13,9 t dimensions of the machine ca.: 2,415 x 2,17 x 4,03 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Characteristics are shown in the photo Without documentation Bought at the Kirov factory in St. Petersburg.

Straightener, straightener, VEB BLEMA GOTHA UBR 20X1600 / 1-10 sheet rolling machine. Machine for straightening sheets up to 20 mm thick and up to 1600 mm wide. The mill was hardly used because it was the second machine in the plant and served as a spare machine. Currently un-exploited. The machine is undergoing modernization, a completely new control system. The possibility of adapting to the customers needs (extension with roller feeders, receiving, the possibility of sanding rolls and rollers, etc.). Technical data : - year of production: 1983 - sheet thickness: 20 mm - sheet width: 1600 mm - upper straightening rolls: 5 pcs - lower straightening rolls: 6 pcs - rolling speed 10 m / min - engine power: 37 kW - engine power: 2 x 18.5 kW - engine power: 1,1 kW - engine power: 1,1 kW - weight: 39150 kg

Roller leveler VEB BLEMA GOTHA Germany Strip max thickness 6 mm, max width 1650 mm 7 + 8 work rolls, diameter 110 mm, 3 rows of supports with hydraulic setup, hydraulic unit included 27 kW AC main motor very good condition, complete and ready for operation, still on foundations in our plant

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Pressing force: 2500kN, throat depth: 450mm, ram stroke: 40-160mm, weight: 16,2t, including documentation.

Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1600 mm material thickness: 6,30 mm no. of straightening rolls: 15 diam. of the rolls ca.: 100 mm total power requirement: kW weight of the machine ca.: 28 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual screw press manufactured by VEB Morgenröthe, type PSHZ 25Masch. -No: 3682 Year of construction 1963Technical specifications:Max. Pressing force: 25 tTable size: 500 x 430 mmBear size: 500 x 200 mmInstallation height: 430 mmSpindle diameter: 70 mmWeight approx: 950 kgExternal dimensions approx: 1450 x 1450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

technical details: - Number of goats: 6 pieces - Number of press beams: 6 pieces - Number of clamping wrenches: 4 pieces - Number of screeds (2,500 mm): 8 pieces - Number of wooden inserts: 6 pieces (1 x divided) Metrics: - Trestle height: 1,000 mm - Trestle width: 1,450 mm (1,410 mm) - Clamping height: 360 mm, minus the screed thickness of 140 mm = 220 mm! - Clamping area: 2,500 x 1,120 mm - Length of the screeds: 2,500 mm (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Hydraulic press PYE 100S1.

Hydraulic press PYE 160SS

Pressing force: 12.5t, stroke: 8-60mm, stroke speed: 140/min, connected load: 1kW, weight: 1.1t.

Description: Serial no.: 058-005/9 Nominal force: 160 Np Operating pressure: 144 kg/cm² Plunger stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Downward speed: 200 mm/s Trunnion Ø: 40 mm Installation height: 300 - 800 Upwards speed: 250 mm/s Table size: 900 x 630 mm Plunger surface: 530 x 400 With deep-drawing device under the worktop Additional equipment: 2-hand operation, additional ram 250 x 200 Caution: Stand cracked and secured with frame. Max. pressing force: 160 to, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Used membrane chamber filter press / filter press Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 15 times !

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C