We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Welding and cleaning line URBAN CC AKS 6250-27/25 + blasting machine URBAN SV 430 Year of production: AKS 6250-27/25 - 2013 Year of production: SV 430 - 2004
used
Year: 2006 - technically efficient, ready to work - after full service - welding dimensions: 2800 x 1600 mm - flash limit: 2 mm - vertical work
used
Year: 2000 - technically efficient, ready to work – after full service - corner cleaning machine SV 610 CNC - for-head welding machine AKS 1400 ETS - turning station WT 660 - cooling station TBA 26/35-K - welding dimensions: 3430 x 2200 mm - flash limitation: 2 mm
used
Year: 2002 - technically efficient, ready to work – after full service - minimum welding dimension: 370 mm - maximum welding dimension: 2500 mm - profile supports
used
Year: 2002 - technically efficient, ready to work – after full service - minimum welding dimension: 370 mm - maximum welding dimension: 2500 mm - profile supports
used
Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>
used
1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...
used
We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines
used
- technically efficient, ready to work - chiselling up + down - place for the milling head
used
Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172
used
Year: 2017 - technically efficient, ready to work – after full service - automatic feed - centering device - pneumatic profile clamping - bumpers for a fixed handle height
used
Year: 2007 - technically efficient, ready to work (after full service) - 3-spindle (high-speed motors) - possibility of setting for various profiles (frame / sash) - pneumatic profile clamping
used
Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)
used
Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg
used
Year: 2003 - technically efficient, ready to work - after full service - for the upper and lower hinge - centering the element - SPS control
used
Stroke: 300, table 450x370, 1300kg
used
Description: Roller table with 2 swivel arms for automatic screwdrivers, 2 URBAN ASS 60 screw feeders, built in 2014 and 2021, including aluminum column Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,700 mm, weight approx.: 500 kg
used
Description: Roller table with 2 swivel arms for automatic screwdrivers, 2 URBAN ASS 60 screw feeders, built in 2017 and 2021, including aluminum column Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,700 mm, weight approx.: 500 kg
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
Spot hump welding machine NIMAK type PMP 5 / 35 spot welding machine, projection welding machine Fabr. No. 88100 Year of construction approx. 1988 Power at 50% ED 35 kVA Radius 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm 60 mm Electrode holder 30 mm Insert electrodes Cone MK 2 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connection load 83 KVA Mains connection 380 volts, 50 Hz - 4-times control - stepless power adjustment - single points and series points - bulging electrode guide - water-cooled (without cooling unit) - electric foot switch Space requirement L x W x H 1200 x 650 x 1500 mm Weight 300 kg good condition; used
used
New ESAB Miggiytrac 1001 electr. Welding chassis Speed: 0.5 - 1.2m/min as new/unused (may show signs of storage) in OVP These are unused goods in their original packaging, which can only show signs of storage. This and further details can be found in the photos. Price excl. VAT (#7717).