We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172
used
Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172
used
Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>
used
1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...
used
We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines
used
- technically efficient, ready to work - chiselling up + down - place for the milling head
used
Year: 2017 - technically efficient, ready to work – after full service - automatic feed - centering device - pneumatic profile clamping - bumpers for a fixed handle height
used
Year: 2006 - technically efficient, ready to work - after full service - welding dimensions: 2800 x 1600 mm - flash limit: 2 mm - vertical work
used
Year: 2007 - technically efficient, ready to work (after full service) - 3-spindle (high-speed motors) - possibility of setting for various profiles (frame / sash) - pneumatic profile clamping
used
Year: 2000 - technically efficient, ready to work – after full service - corner cleaning machine SV 610 CNC - for-head welding machine AKS 1400 ETS - turning station WT 660 - cooling station TBA 26/35-K - welding dimensions: 3430 x 2200 mm - flash limitation: 2 mm
used
Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)
used
Year: 2002 - technically efficient, ready to work – after full service - minimum welding dimension: 370 mm - maximum welding dimension: 2500 mm - profile supports
used
Year: 2003 - technically efficient, ready to work - after full service - for the upper and lower hinge - centering the element - SPS control
used
Stroke: 300, table 450x370, 1300kg
used
Welding and cleaning line URBAN CC AKS 6250-27/25 + blasting machine URBAN SV 430 Year of production: AKS 6250-27/25 - 2013 Year of production: SV 430 - 2004
used
Description: Roller table with 2 swivel arms for automatic screwdrivers, 2 URBAN ASS 60 screw feeders, built in 2014 and 2021, including aluminum column Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,700 mm, weight approx.: 500 kg
used
Description: Roller table with 2 swivel arms for automatic screwdrivers, 2 URBAN ASS 60 screw feeders, built in 2017 and 2021, including aluminum column Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,700 mm, weight approx.: 500 kg
used
Three-spindle copying and lock milling machine make ROTOX type KF 457Year of construction 1993the ideal machine for lock machining: profile cylinder, pusher holeand lock case on all aluminum and PVC profiles in one clampingMax. Profile width: 125 mmMax. Profile height: 50 mmCutting path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors a: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx.: 180 kgWith- 1 vertical cutter shaft- 2 horizontal milling shaftsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
2-spindle copy router for aluminum + steel make ROTOX type KF 155Machine -No: 1678, built in 1973Technical specifications:Milling length: 270 mmMilling width: 130 mmClamping width: 125 / 240 mmClamping height: 350 mm2 vertical milling speeds: 12000 / 6000 rpm.1 horizontal milling speed: 9000 / 4500 rpm.2 drive motors: 1.6 hp eachWeight: 140kgwith- 2 pneum. clamping cylinders- Spray device- 2 support armslittle used, despite the year of constructionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Corner cleaning machine for automatic deburring of weldson welded plastic frame make ROTOX type EPA 277Machine -No: 277 6217 Year 1992Max. Profile size: 160 x 150 mmminute Profile size: 30 x 30 mmFrame size min.:320 x 320 mmAir consumption: 200 l / minAir pressure: 6 - 8 barConnected load: 2.2 kWPower connection: 380 V, 50 HzWeight approx: 900 kgWith- aut. profile recognition- Profile edition page selectable- electronic PLC control- minimal processing timelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Corner cleaning machine make ROTOX type EPA 275Fabr. -No: 275 680 built in 1984for deburring the welds on welded plastic framesTechnical specifications:Spindle 30 mmfor holding 2 milling setsMilling change automatically via push buttonFeed and height adjustment pneumaticBarometric pressure max.8 barelec. Connection 380 V, 50 Hz, 3.1 AWith:- Workpiece support tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
see photos
used
ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...
used
Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication
used
Three-spindle copy and lock milling machine make ROTOX type KF 457Fabr. -No: 457 6870, year of construction approx. 1994Technical specifications:Max. Profile width: 125 mmMax. Profile height: 50 mmMilling path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors each: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx: 180 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools