used UNIVERSAL Flat knitting machines

Yarn count: 10, nominal width: 90inch.

Technical details on demand.

Nominal width: 2500mm/ 96inch, yarn count E: 10.

Working width: 2290mm.

Working width: 2300mm, yarn count E: 8.

Working width: 90inch, yarn count E: 10.

B&A REF: 8889 TON: 45TON SHOT WEIGHT: 45 SCREW DIAMETER: 25MM STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: MM MAX DAYLIGHT: 55MM EJECTOR STROKE: 125MM CONTROLS: SELOGICA AIR VALVES: 1 SCREW DRIVE: HYDRAULIC

We offer you 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price

Travel X-axis 1100 mm Travel Z-axis 360 mm Travel Y-axis 400 mm Table length: 1600 mm Table width: 360 mm Spindle taper: ISO 50 Main axle speed range: 32 – 1250 rpm. With vertical and chisel head accessories Year of manufacture: 1990 Cooling water system works. High-speed clutch burned out, to be renewed. Advance functions can be controlled manually.

Manufacturer Universal piston filler 6 heads capacity 500 ml with dubble fill can do 1000ml

Manufacturer Universal 12 head servo control filling machine year 2016

The machine is Universal Pack from Italy, the machine is full automatic, with 2 tracks, with embossed paper stamping system, with 2 colors, the dimensions of the bust are variable, the amount of filling varies from 1 to 10 grams per bust. The machine is slightly used

With accessories and documentation.

As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible.

No. 4973: 1 gebr. Hydraulic unit 250 l / 60 bar / 40 l/min Fabr. UNIVERSAL Hydraulics, Bauj. 1987 with formerly HEYLIGENSTAEDT Heynumat 10 Arb.-Ber.: approx. 900 x 650 x 1500 mm, drive power: 5.5 kW Other: approx. 300kg (estimated)

Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Universal Pack Gamma-M5D Sachet Machine – 5 lane This machine has come direct from a closed sauce manufacturing company, was producing small sachets of barbecue sauce. 2015 machine with fillers for hot fill and cold fill.

- Software updated: 3.15.8 - Hours: 1280 - Working radius: 850 mm - Payload: 5kg Condition: very good, hardly any wear due to the low loads. Mainly used for measuring sensors in the laboratory. Circumference: - Robot with control panel and control - Folder with user manual - mobile, solid table

Used dissolver by UNIVERSAL - PASQUALE MORENO GENOVA. Description: - stirrer drive: electric - lifting of mixing column: hydraulic - adapted for screw feeder for dosing of loose semi-finished products - stainless steel INOX caddy, without drive - dispersing disc diameter: 25 cm - disc rotation: max 2800 / min 1400 rpm - dimensions of vat: 110 cm diameter x 100 cm height - DIMENSIONS (l x w x h): 2.10 x 1.10 x 1.70 h - power supply: 380/400V

Universal Roborts ,model, ur3 Serial number 2017332039 Year of manufacture 2017 with driven rollers Bannō Working width approx. 600 mm so security around the house Acrylic glass with aluminum frame belonging to a robot control Manufacturer Universal Roborts cb31ur3

feed pressure: 200 bar liter capacity: 250 l weight of the machine ca.: 0,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer : Stephan Model: UM44 Year : 2001 Type : Cutter Application: mixing, reducing, cutting, kneading Total volume: 44 L Useful volume: max. 35 L Max. temperature: 95?C Drain: manual through lid or tilting. Power: 2.2 / 4 / 5.5 kW Dimensions (closed): 525 x 800 x 1200 Display: T?C / Time / Speed Documentation available.

Description: Lot consisting of 4 knitting machines: serial number 5217120526 - , Gauge 14 serial number 5217120525 - , Gauge 14 serial number 5217120523 - , Gauge 12 serial number 5217120522 - , Gauge 12 Approx. Onsite Dimension. (l x w x h): 2,970 x 4,000 x 2,010 mm, weight approx.: 4,520 kg