maximum number of results exceeded > 1000
please refine your search
used top condition see type plate all other information under 0049 1711742535 Visit and pick up location 97900 Külsheim Free shipped price from site
WORKING RANGE TURNING: - swing diameter (max): 470 mm - turning diameter (max): 235 mm - worpiece length max.: 1000 mm BED GAP / BRIDGE: - swing in gap: 690 mm MAIN SPINDLE: - spindle bore diameter: 58 mm - spindle revolutions (min): 20 /min - spindle revolutions (max): 2000 /min - number of gears: 12 - spindle diameter: 58 mm SCREW CUTTING SPINDLE: - advance z-axis (min.): 0.05 mm/r - advance z-axis (max.): 0.82 mm/r - advance x-axis (min.): 0.02 mm/r - advance x-axis (max.): 0.4 mm/r TAILSTOCK: - taper: MK 4: ELECTRICAL SPECIFICATIONS: - total power consumption: 5.5 kW DIMENSIONS / WEIGHTS: - space requirements -left/right-: 1900 mm - space requirements -fron ...
UNICAT SAFE program 3 Patented safety system, which in physical contact with the rotating saw blade, lightning fast draws this under the table and there slows down to prevent serious injury. In contrast to older security systems from other manufacturers remains intact with this saw blade and can be put into operation again after approx. 5 minutes. Without damage. Carriage 3200 mm 1600 mm extension table Main motor 5.5 KW, inverter 2000-6000 RPM). motorized 2-axis scoring unit with its own drive. Motor-driven height adjustment in steps of 0.1 mm. Motor-driven angle adjustment in steps of 0.1 ° with digital display. Motorized fence 2-speed in 0.1 mm Steps and digital displ ...
bag length: 800 bag width: 582 work impulse: 100 table-size: 850 x 560 mm band width: 5/6/8/10/12 mm clamping range: ca. 100 - 600 N cycle time: 5 - 6 sec total power requirement: 0,50 kW This is a mobile packing station for rational strapping bundles and packages of different dimensions with plastic tape. Machine can be demonstrated under power.
Microtec GoldenEye 501/502 Multisensor scanner for determining the quality of sawn timber in the inline transport Scope: Capping Type of wood: Spruce, pine Length of the slat: 2000mm - 6000mm The slat width: 45mm - 190mm Thickness of the plate: 18mm - 80mm Wood surface: Rough (circular saw cut, clean surface) Moisture content: 8% - 18% Wood temperature: up to + 40 ° C Maximum feed rate GOLDENEYE: from 80 m / min. up to 150 m / min (depending on the cross section) Board gap in the scanner á?³150mm Ambient temperature: + 5 ° C up to + 35 ° c. Maximum humidity: á?¸80% rel. hum. System configuration: 3D 4 time and 4-sided Visual inspection, X ray Camera ...
Weight approx.: 3500 kg turning diameter: 475 mm turning length: 1880 mm Dimensions (l x w x h) approx.: 6200x3500x2000 mm spindle bore: 62,5 mm Description: KERN CD 480 CNC Lathe swing diameter over bed slide: 260mm Distance between centres: 2000mm workpiece weight max.: 500kg quill: MK4 turning speed range: 5 - 3000 stufenlosU/min total power requirement: 28kW control: Manual Plus V260 face stroke: 260mm dia. of quill: 60mm Machine under power
Lift table, Flexlift flounder lift table F CE, table 900 x 1450 mm, load capacity 300 KG - used -: Price from site: â?¬890.-(net)! Manufacturer: Flexlift Type: Flounder lift table F CE Table 900 x 1450 mm, Lifting height 670 mm,. Load 300 KG Further technical data see data sheet below (photos) incl. hydraulic aggregate and foot switch. Condition: The lifting table is functional, in very good used condition, 100% because this was very rarely used. Available: available now Location: Aachen
Weight approx.: 3900 kg cutting length: 4500 mm Dimensions (l x w x h) approx.: 8000 x 2300 x 1850 mm Description: SCM SIGMA 65 Panel Saw Automatic squaring Cutting Width: 4200 mm Effective cutting length: 4500 mm Main blade max. over run: 65 mm Automatic lateral alignment with pneumatic cylinder Transfer zone under the pusher equipped with freewheels to prevent damage to the panels Front support tables: all on air cushion 1 front table with guide 2 movable front tables Characteristics of the blade carrier: Speed of the slide carriage: Front: 13 - 27 m/min Rear: 27 m/min Trolley with blade and scoring unit Main blade max.: 300 mm Motor power 7.5 HP Scoring blade max.: 160 mm 2 HP motor powe ...
Plastic injection molding machine Make: ARBURG, type: ALLROUNDER 221/K / 350-100, year of built: 2000, serial number: 163236, clamping force 35 to, equity weighing 1,150 kg
cap. approx. 2000 pcs./h,\r\ndougweightrange approx. 400 to 1600 g, \r\n
Filler Handtmann VF 50, vacuum Stuffer with calibration gear and accessories, just under 8,000 operating hours, vacuum pump oil change, dimension Lxwxh approx. 85x60x170cm, weight approx. 465 kg. Machine in good condition, works perfectly
model 401, double excenter\r\ncap. max 10.000 pcs./h\r\ndistance between the cups 110 mm, width 900 mm\r\n
OKUMA MCVA 1630 DOUBLE COLUMN CNC MACHINING CENTRE -------------------------------------------------- Year: 1984 Control: OSP 5000 Table size: 1200 mm x 3100 mm Spindle speeds: 2000 rpm Z-axis: 400 mm W-axis: 950 mm Good running condition. Inspection under power in Bangkok.
type Record, 30 pcs., size 1, 20 - 70 g\r\ninclude 3 new plastic moulding plates\r\n
ASQUITH 5RM FLOOR BORER ----------------------- Year: 1966 Column traverse: 12,192 mm Spindle vertical traverse: 3,657 mm Spindle diameter: 127 mm Spindle travel: 1066 mm Ram size: 406 x 508 mm Ram travel: 762 mm Spindle speeds: 2.5-700 rpm -Facing Head -Universal attachment -Screw cutting Good running condition. Inspection under power in Bangkok
Type Automat, 30 pcs., 32 - 70 g\r\nhead turning backwards\r\n
5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude \r\ndivider + rounder, type MUS - G 5, model 1998\r\n doughweightrange max. 150 g\r\n include moulding drum 74 -85 g\r\nintermediate proofer, type ZGL5/273/360,\r\n proofing time approx.10 min.\r\nstamping unit, type FST 5/50\r\nfinal proofer type SG 0,6/1010/950,\r\n proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm
LOUDON PLANOMILLER ------------------ Table: (T slotted area): 1982 mm x 9144 mm Table stroke: 10,000 mm Between columns: 2560 mm Under rail: 1600 mm Milling Head: Hitachi, 10 HP, 48-552 rpm 2-axis DRO Dimensions: 16,000 mm x 5,500 mm x 5,000 mm H Weight: 50,000 kg
cap. max. 7200 pcs./h, \r\ndougweightrange approx..200 to 1500 g,\r\nrounding length approx. 7.400 mm\r\ncylinder + tracks are teflonised\r\ntracks are adjustable\r\nvariable speed, 4 fans,
Siemens 840 D range on clamping surface (threaded holes according to DIN 55201) 400 400 mm NC rotary table Pallet changer with rotary Chuck Platt Ständerlängsverstellung (x) 650 mm Support vertical adjustment (y) 650 mm Table cross adjustment (z) 650 mm Interference circle diameter Ã¸ 700 mm Motor spindle speed 15000 rpm Main drive power 31 kw Torque 200 nm Tool holder HSK DIN 69893-HSK-A63 Chain-type tool magazine 60 seats prepare subsequent cultivation of portable electronic hand wheel Chip conveyors, scraper discharge height 1050 mm Closed working space Panel according to UVV Number of counters on NC screen Remote diagnosis Pallet sequence operation Op ...
Type Automat, 30 pcs., 32 - 70 g\r\nhead turning backwards by a motor\r\ninclude 3 new rounding plates
Paal Konti 425 B, press power 100 t, inspection under working condition is possible any time Technical specification: Manufacturer Paal, Germany Type KONTI 425 B Year of construction 1989 Press power 100 t Drive power 110 k Feed channel 1.020 x 2.000 mm Press channel dimensions 750 x 1100 mm (h x w) Bale weight 525-700 kg, depending on material Average throughput rates: Density of 35 kg/cbm 12 t/h Density of 60 kg/cbm 20 t/h Density of 100 kg/cbm 25 t/h Tying system 4-fold vertical, fully automated Dimension Approx.14.024 x 2.352 x 3.613 mm (LxWxH) Weight Approx 35 t The press is still under working process and could be inspected any time
infeed 3 clock / outfeed 12 clock, cap. max. 5000 pcs./h, \r\ndougweightrange approx.. 400 to 1600 g (estimation)\r\nmoulding length approx. 4100 mm\r\ncone + tracks are teflonised\r\ninclude fan + hot air, moveable\r\n
Type Mitutoyo B 706 Machine type hand-held 3D measuring machine built in 1989 Control GEOPAK 3, V5. 01 Probe Renishaw PH1 Size 1.63 x 1.41 x 2,55 meters Working area x 700 mm, Y 650 mm, Z 600 mm Last maintenance 2017 including calibration weight approx. 2,000 kg Price VB â?¬9.999,--/ from location available from immediately site 88525 Dürmentingen Machine is fully functional and can be visited on site under current at any time.
30 pcs., 30 - 70 g\r\ninclude 3 new moulding plates
WALDRICH-SIEGEN PLANO-MILLER - CAPACITY 4500 X 13,700 X 4000 MM MODEL: PF-H-150 YEAR: 1974/2017 MACHINE NO: 11167 TABLE T-SLOT AREA: 4000 MM X 13,000 MM TOTAL LENGTH OF TABLE: 14,000 MM MAXIMUM TABLE TRAVERSE: 13,700 MM BETWEEN COLUMNS: 4500 MM MAXIMUM WORK-PIECE HEIGHT: 4000 MM MAXIMUM TABLE LOAD: 390,000 KG BEDWAYS: HYDROSTATIC- 3250 X 28,000 MM SPINDLE: 360 MM DIA X 450 MM STROKE, ISO60 TOTAL POWER REQUIREMENT: 207 KW OVERALL DIMENSIONS:33,500 MM X 7,300 MM X 8,000 MM TOTAL WEIGHT: 450,000KG 2017 - X/Y/Z/W FITTED NEW PLC TOUCHSCREEN, INVERTERS, RE-WIRE EXCELLENT CONDITION.INSPECTION UNDER POWER
cap. approx. 5100 pcs./h,\r\ninclude \r\ndivider + rounder, type MUC, 4 rows, \r\n doughweightrange 28 - 95 g\r\n moulding drum 50 - 58 g\r\nintermediate proofer I + II, moulder, roll cutting device,\r\nsetting machine width 600 mm, max. length 1000 mm
Butler Double Column Planer ---------------------------- Table size: 1200 x 7500 mm Between columns: 1250 mm Under rail: 1200 mm 4 x tool-boxes Weight: 45,000 kg Condition: Excellent. Recently upgraded electrics, bed-ways machined/re-surfaced
Type Automat, 30 pcs., 32 - 70 g\r\nmanually head turning backwards\r\n
PLANERS PLAN0-MILLING MACHINE ----------------------------- Table surface area: 2934 x 5512 mm Maximum stroke of the table: 6300 mm Maximum width between columns: 3650 mm Maximum height under cross-rail: 1800 mm Width across bedways: 1372 mm Dimensions: 12,000 x 6000 mm x 5500 mm (h)
Type Optimat 3, 30 pcs., 30 - 95 g
MARUFUKU DOUBLE COLUMN PLANO-MILLER ----------------------------------- Table size: 1800 x 6000 mm Between columns: 2560 mm Under rail: 1800 mm Weight: 75,000 kg Very good condition. Inspection under power.
moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone, plastic tracks, \r\ninclude fan + hot air
DRONSFIELD (UK) CNC PAPER ROLL GRINDING MACHINE CAPACITY: 2000 MM X 12,000 MM CONDITION: FULLY REBUILT, UNDER POWER EQUIPMENT: NECK RESTS, HUBS, TOOL-POSTS FOR TURNING ROLL ENDS, ETC LOCATION: THAILAND
infeed 3 clock / outfeed 12 clock, cap. max. 5000 pcs./h, \r\ndougweightrange approx.. 400 to 1600 g (estimation)\r\nmoulding length approx. 4300 mm\r\ncone + tracks are teflonised\r\ninclude fan + hot air, moveable
Fiber laser machine HLF Power: 4kW Sheet size: 3000 x 1500 mm Changing table Siemens touch screen controller with LAN/USB Siemens drives High end Precitec auto focus Pro cutter cutting head IPG resonator with 4kW Small part conveyor is included Warranty CAD CAM software Commissioning Delivery within DTL and training offered The machine is a machine of the exhibition. She can be tested at any time under power. We have in our exhibition different laser machines of our manufacturer under power and various materials to the test. We invite you to us, including your drawings or Their material to cut. We have machines for 15 years exclusive trading company and service provider ...
moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone, plastic tracks, \r\ninclude fan + hot air
MAINCA needed EM-25 piston filler Unfortunately no nameplate, device seems to have been built by Mainca and sold under Benedict older machine in ordentlischem State must be before using thoroughly cleaned two filling tubes, piston spanner and piston extension screw are supplied Housing and cover made of stainless steel Developed video about test run
Weight approx.: 70000 kg Dimensions (l x w x h) approx.: 3800 x 3800 x 30000 mm Description: Towercrane Potain MC 85 B, with travelling undercarriage. Serial Number 98343. Under Hook Height: 23.7 m. Jib: 30m. Max. load 5000 kg (2400 kg Point load). Revisions up to date
Stock # U2295-1 Second hand, carbon steel, cutting mill by Dreher Gmbh&Co (Germany) type S26/41. Mill has feeding inlet 41,5 cm x 49 cm. Milling chamber has internal dimensions: width 410 mm x diameter 260 mm. Rotor is belt driven by el. motor 11 kW, 1440 rpm, 380/660 V, 50 hz. Rotor is solid type and is equipped with three knives and is working with rotation about 557 rpm. There are two stationary knives mounted on walls of milling chamber. Below there is installed a screen. Bottom discharge into the rectangular container, mounted under the milling chamber. Mill is equipped with local control panel. Shipping dimensions: width 90 cm x length 120 cm x height 210 cm.
number of spindles: 6 spindle passage: mm turning length: mm --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 6 WORKING RANGE TURNING: - swing diameter (max): 14 mm - turning diameter (max): 14 mm ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: - band filtration unit: yes: - coolant through turret: yes: - through spindle coolant attachment: yes: - aspiration unit: yes: - hydraulic system: yes: - European CE standards: yes: MultiSwiss technical data 6x14 Bar passage mm 4-14 Max. Workpiece length mm 40 Max. Remaining piece length mm 70 Max. Main spindle rpm 8.000 Power main spindle kW ...
Divider and rounder for rolls WP (WERNER & PFLEIDERER). The machine is used to quickly divide and form dough into rolls or donuts. The device is semi-automatic, and its construction and knives are made of stainless steel. Ironing, splitting and turning of portions is done by a lever. Three forming plates are attached to the machine. Specification: Producer: WERNER&PFLEIDERER Type: Divider and rounder Number of servings per one cycle: 30 pieces Weight range: 150-300 g Capacity: about 1300 pcs / h Forming tray: 30 servings (3 pieces) Weight: 200 kg
number of spindles: 6 spindle passage: mm turning length: mm --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 6 WORKING RANGE TURNING: - turning diameter (max): 14 mm ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: - band filtration unit: yes: - coolant through turret: yes: - through spindle coolant attachment: yes: - aspiration unit: yes: - hydraulic system: yes: - European CE standards: yes: MultiSwiss technical data 6x14 Bar passage mm 4-14 Max. Workpiece length mm 40 Max. Remaining piece length mm 70 Max. Main spindle rpm 8.000 Power main spindle kW 5.60 Torque Main spindle Nm 8 M ...
PREALPINA 130 mm.35 L/D For PE PP PC PS Average output 450/600 kg/h Construction year 1998 Good running conditions Storage silo Forced feeding unit Screw diam.130 mm. 35 L/D, new in 2015 Extruder motor 250 kw Semi-automatic screen changer (renewed in 2017) Vacuum degassing unit Underwater pelletizer Water bath Centrifuge Extraction vent Electric cabinet
Weight approx.: 4900 kg Dimensions (l x w x h) approx.: 4000 x 2200 x 2550 mm Description: Serial number 16/40, max. bending width 2540 mm, max. sheet thickness 4.5 mm, operating hours according to readout 3872.9, control MULTIBENT 8000, table size approx. 2450 x 1550 mm, including extern oil tank, placed under the machine, double foot pedal, dimensions bending machine approx. 4000 x 2200 x 2550 mm, weight approx. 4900 kg, including various rolling and bending accessories, diameter approx. 50 to 170 mm, divided in 19 shafts, various bending irons, 1 mobile transport trolley, 1 wall rack, dimensions accessories approx. 2600 x 2000 x 1500 mm, weight 1800 kg
TECNOVA RECYCLING EXTRUDER 130 mm 37 L/D pelletizer Construction 2008 totally reconditioned by Constructor in 2014 Scrap silo 13 m3 Forced feeding unit Extruder with 130 mm screw, 37 L/D Vacuum pump for degassing 100HP a.c. Motor 280 HP with inverter 250 Hp Control Panel for complete management Dynisco pressure control system Screenchanger : either semi automatic or fully automatic are available underwater hot melt pelletizer – year 2015 Roto classifier Installed power: 425 kW Approx. used power in use : 250 kW Cooling water demand: 2200 L/h Running with clean LDPE flake-average output 540kg/h Screw and barrel regenerated in April 2018 Running test possible. The line wi ...
This listing is for one of 6 MOSCA strapping lines consisting of three parts: - RO TRI 5 strapper (longditudinal ) - RO TR500-4 strapper (90 degree) - AFFELDT UB 15 underwrapper Strapping system MOSCA RO-TAI-5 Producer: MOSCA RO-TAI-5 is a high performance cross strapping system designed for integration into automated packaging lines. System RO-TAI-5 is built from one machine MOSCA RO-TR-5 bundles crosswise and 1 machine RO-TRI-5 bundles lengthwise. With a tandem of two machines by a very fast time cross. Key Features: - 40 cycles per minute. - This strapping system consists of machine MOSCA RO-TR-5 and machine MOSCA RO-TRI-5 - Cross strapping without bundle turning - Can be integrated ...
Format (cm): 35x45 Equipment / Additional information: Pockets 2 Fold types: spiral fold, zigzag fold, double parallel fold, single fold Power: Underfloor suction feeder: 30 000 bph Friction feeder: 20,000 sheets / h with parallel fold A4, 80 g / m2 Paper weight: 40 - 250 g / m2 with simple parallel fold Electrical connection values: Mains voltage: 230V Current consumption: max.IOA
1. THE PRESSES Installed in 2005, these two Berliner size presses ceased production in January 2018 and are now being offered as complete systems, or broken down to individual print units and reel stands to support the pagination requirements of a new owner. Located in London, each press consists of eleven columns and contains a double folder for additional production flexibility. Also available are the ancillary systems and plant which served the presses including ink, air and water handling machinery. The equipment here is in impeccable condition having been run at 30% of a design capacity of 80,000 copies per hour. Everything on-site is still under power and available for viewing. ...