Blow moulding machine:
Brand: SIDEL
Type: SBO 16 four
Year of construction: 1999
Hours of operation approx.: 150.000 h (was used in 2-shift operation)
System has been regularly serviced according to rules or speci ...
used machine
Blow moulding machine:
Brand: SIDEL
Type: SBO 16 four
Year of construction: 1999
Hours of operation approx.: 150.000 h (was used in 2-shift operation)
System has been regularly serviced according to rules or specifications by the manufacturer, last in the April 2017 large maintenance including renewal of the base bearing.
There have been almost exclusively bottles of 1ltr - 2ltr. thus produced.
The plant is since mid March 2018 decommissioned, dismantled and stored in the production hall.
Accessories:
1 lift or carton emptying device for preforms to the preform elevator
1 preform elevator
1 preform positioner
1 control cabinet for the plant
- several available air-transport conveyors for bottles
Documentation such as present in the movement.
Equipment must be moved out until latest 10. of May 2018
PET blowing and filling line with SIDEL Combi filler 100ml
- nominal output: 14,400 bph (100mL)
- bottle size range: 100 ml - 1.0 Litr.
(converting set for 0.5 and 1ltr. not included!)
- bottle neck / Screw c ...
used machine
PET blowing and filling line with SIDEL Combi filler 100ml
- nominal output: 14,400 bph (100mL)
- bottle size range: 100 ml - 1.0 Litr.
(converting set for 0.5 and 1ltr. not included!)
- bottle neck / Screw cap: 30/25 mm low (Screw cap type common for still water and
soft drinks)
- ultra clean design, - min. log3 (dry preform decontamination by vaporised H2O2
novative Sidel PREDIS system) - CIP, SIP - COP, SOP filler sanitation / sterile
air overpressure
- SIDEL Combi 8 FMm-/ 24 / 8C PET blowing-filling-capping compact machine o HEUFT
Cap and level checker
- FUJI Intersleeve 3200-DE sleeve machine
- SMI MP 100 Multi Packer - cluster Pack 2 x 2, 2 x 3, 2 x 4 carton wrapped
- SMI LSK 15 shrink-wrapping machine
- bottle accumulation and conveyor system
Year of manufacturing and up is start 2006
Operating hours 29000 h
Out of operating since end of 2014.
Complete equipment, is still installed and available immediately.
spindle diameter: 115 mmx-travel: 2000 mmy-travel: 2000 mmtaper ISO: 50 P.D.B. z-travel: 2000 mmTable dimensions: 1600x1800 mmtotal power requirement: 13/19 kWweight of the machine ca.: tdimensions of the machine ca.: ...
spindle diameter: 115 mm x-travel: 2000 mm y-travel: 2000 mm taper ISO: 50 P.D.B. z-travel: 2000 mm Table dimensions: 1600x1800 mm total power requirement: 13/19 kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.
spindle diameter: 130 mmx-travel: 915 mmy-travel: 1500 mmControl: G+L 8000A w-axis: 915 mmz-travel: 1700 mmTable dimensions: 1219x1245 mmtable load: 5 t/ 9 t tnumber of spindle speeds: 5.1500 total power requirement: kW ...
used machine
spindle diameter: 130 mm x-travel: 915 mm y-travel: 1500 mm Control: G+L 8000A w-axis: 915 mm z-travel: 1700 mm Table dimensions: 1219x1245 mm table load: 5 t/ 9 t t number of spindle speeds: 5.1500 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.
NC bending machine
Manufacturer: Wieger
Type: 100/35
BJ.: 1987
Weight: 14500 kg machines documents are available, as well as the wiring diagrams.
Contact person Mr. Mueller see also our over 200 more deals at.
...
used machine
NC bending machine
Manufacturer: Wieger
Type: 100/35
BJ.: 1987
Weight: 14500 kg machines documents are available, as well as the wiring diagrams.
Contact person Mr. Mueller see also our over 200 more deals at.
(Changes and errors in the technical data, information
and prices and subject to prior sale!)
spindle diameter: 120 mmx-travel: 1800 mmy-travel: 1300 mmTable dimensions: 1120x1400 mmtaper ISO: 50 P.D.B. z-travel: 1500 mmnumber of spindle speeds: 0-1.000 total power requirement: 13,2 kWweight of the machine ca.: ...
spindle diameter: 120 mm x-travel: 1800 mm y-travel: 1300 mm Table dimensions: 1120x1400 mm taper ISO: 50 P.D.B. z-travel: 1500 mm number of spindle speeds: 0-1.000 total power requirement: 13,2 kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.
Goed lopende gebruikte Deutz engine (diesel) type BF4M1013E
85 kW bij 1500 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woo ...
used machine
Goed lopende gebruikte Deutz engine (diesel) type BF4M1013E
85 kW bij 1500 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woord.
spindle diameter: 102 mmx-travel: 1600 mmy-travel: 1200 mmControl: Heidenhain TNC 131 w-axis: 700 mmz-travel: 1500 mmTable dimensions: 1250x1400 mmnumber of spindle speeds: 8-1600(18x) total power requirement: 15 kWweigh ...
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1200 mm Control: Heidenhain TNC 131 w-axis: 700 mm z-travel: 1500 mm Table dimensions: 1250x1400 mm number of spindle speeds: 8-1600(18x) total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.
Goed lopende gebruikte Deutz engine (diesel) type F2L1011F
20 kW bij 2000 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woor ...
used machine
Goed lopende gebruikte Deutz engine (diesel) type F2L1011F
20 kW bij 2000 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woord.
spindle diameter: . mmx-travel: 2200 mmy-travel: 1800 mmspindle bore: 127 mmw-axis: 914 mmtool adaptor: MT 6 Table dimensions: 1220x2490 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the mach ...
spindle diameter: . mm x-travel: 2200 mm y-travel: 1800 mm spindle bore: 127 mm w-axis: 914 mm tool adaptor: MT 6 Table dimensions: 1220x2490 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.
Goed lopende gebruikte Deutz engine (diesel) type BF6M1013
136 kW bij 2200 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woo ...
used machine
Goed lopende gebruikte Deutz engine (diesel) type BF6M1013
136 kW bij 2200 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woord.
spindle diameter: . mmx-travel: 2770 mmy-travel: 2050 mmspindle bore: 130 mmtaper ISO: 50 P.D.B. w-axis: 914 mmvoltage: 380 Vtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThi ...
spindle diameter: . mm x-travel: 2770 mm y-travel: 2050 mm spindle bore: 130 mm taper ISO: 50 P.D.B. w-axis: 914 mm voltage: 380 V total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.
Goed lopende gebruikte Deutz engine (diesel) type F1L511
bij 2800 tpm 12 kW
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woord. ...
used machine
Goed lopende gebruikte Deutz engine (diesel) type F1L511
bij 2800 tpm 12 kW
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woord.
spindle diameter: 102 mmx-travel: 1600 mmy-travel: 1250 mmControl: Heidenhain TNC 355 (530) taper ISO: 50 P.D.B. w-axis: 710 mmz-travel: 1500 mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of the ...
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1250 mm Control: Heidenhain TNC 355 (530) taper ISO: 50 P.D.B. w-axis: 710 mm z-travel: 1500 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.
Goed lopende gebruikte Deutz engine (diesel) type F6L413R
68 kW bij 1500 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woord ...
used machine
Goed lopende gebruikte Deutz engine (diesel) type F6L413R
68 kW bij 1500 tpm
Wij hebben een grote voorraad aan nieuwe en gebruikte engines.
Met betrekking tot prijzen en beschikbaarheid staan wij U graag te woord.
spindle diameter: 110 mmx-travel: 1985 mmy-travel: 1620 mmcontrol: Heidenhain TNC 415B w-axis: 560 mmz-travel: 1260 mmTable dimensions: 1400x1600 mmtable load: 6,3 ttotal power requirement: 33 kWweight of the machine ca. ...
spindle diameter: 110 mm x-travel: 1985 mm y-travel: 1620 mm control: Heidenhain TNC 415B w-axis: 560 mm z-travel: 1260 mm Table dimensions: 1400x1600 mm table load: 6,3 t total power requirement: 33 kW weight of the machine ca.: t dimensions of the machine ca.: m
This ad was created with MODUL MWS - the software solution of LogoTech.