Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 10621565

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

Category: 302 extruders / Extruders
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 112597719
New in: 1978

used

check Seller: K & K Industrievertretungen GmbH
Location: Hannover Land-de

add to watchlist

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Category: 307 rubber machines / Rubber extruders
Latest update: 25.09.2023 add to watchlist
approved
dealer
item-No.: 150671556
New in: 1987

used

check Seller: Pelmar Engineering Germany GmbH
Location: 63457 Hanau Land-de

add to watchlist

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Category: 307 rubber machines / Rubber extruders
Latest update: 22.03.2024 add to watchlist
approved
dealer
item-No.: 161651451

used

check Seller: DEWIKO.eu Inh. Kicinski
Location: Land-de

add to watchlist

Profile extruder, GE 90 x 16 D vacuum, make Troester, cold lined

Category: 302 extruders / Extruders
Latest update: 19.03.2024 add to watchlist
item-No.: 163609715
New in: 1988

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: 36419 Geisa Land-de
VS

add to watchlist

Key data: 120 mm, 22

Output: approx. 255 - 450 kg/h (manufacturer's information from brochures; depending on material and profile; DEGUMA assumes no liability for actual, product-specific output) Straight head on hinged flange, fastening via screws; NEW SEVA motor, new control system

Category: 307 rubber machines / Rubber extruders
Latest update: 26.03.2024 add to watchlist
ankerimg
item-No.: 163656443
New in: 1987

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: 36419 Geisa Land-de

add to watchlist

Key data: 120 mm, 18 , 45 1/min

Screw with vacuum zone, output approx. 255 - 400 kg/h, straight head

Category: 302 extruders
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 3273503
New in: 1991

used

check Seller: K & K Industrievertretungen GmbH
Location: Land-de

add to watchlist

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Category: 302 extruders
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 3273505
New in: 1991

used

check Seller: K & K Industrievertretungen GmbH
Location: Land-de

add to watchlist

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Category: 308 other machines for plastic
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163677506

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Roller diameter: 550mm, roller width: 1500mm, connected load: 75kW, without documentation, accessories or spare parts, an inspection is possible, the machine was used to process silicones with colors, fillers and other additives.

Category: 307 rubber machines / Calenders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156211670
New in: 1963

used

Location: Land-de

add to watchlist

roll surface width: 450 mm roll diam. toproll: 203 mm roll diam. bottom roll: 203 mm output: 8,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 307 rubber machines / Rubber extruders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156875410
New in: 2005

used

check Seller: MEB Maschinenhandel GmbH
Location: Norddeutschland Land-de

add to watchlist

screw ø:: für Extruder 90 mm screw length:: -- screw speedl:: -- U/min drive power:: 13,6 kW Condition: little used, as good as new Specification: gear pump ZP 75/50 for extruder size 90 - SEW helical gear units: R 97 - Siemens direct current motor: 1 GG5 118 - Drive power: 13.6 kW, 57 A - curved tooth coupling - With clamp for the head connection, - Clamping flange for extruder and head connection, - Base plate with linear guide rails, - Tooth shaft diameter: 75 mm - tooth width: 50 mm - helical gearing, hardened steel bearings, right-hand drive - without control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 307 rubber machines / Rolling mills
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162437537

used

check Seller: SGT SERVIS, spol. s r. o.
Location: Land-cz

add to watchlist

Key data: 550 mm, 1500 mm

Mixing mill Troester 550 x 1500 mm Bush bearings Motor: 90 kW Friction : 1:1,20 Manual NIP adjustment Stock blender

Category: 302 extruders
Latest update: 29.03.2024 add to watchlist
item-No.: 163469660
New in: 1984

used

Seller: Exapro
Location: Land-bg
Price: 35.500 € add to watchlist

We would like to sell Extruder Bandera T150 and Troester with included feeding line, cooling line and cutting sector. This machine was used for production of Neolite Rubber Sheets. More information upon request!

Category: 307 rubber machines / Calenders
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 163526829
New in: 1971

used

check Seller: Pelmar Engineering Germany GmbH
Location: 63457 Hanau Land-de

add to watchlist

Key data: 1800 mm, 700 mm, 700 mm

available Textile Calendar Complete Line - 2 x let-off, Splicing press, Accumulator, Tension unit, Heting Drums, Calender with thickness measuring, Cooling Drums, Thickness meas. (final product), Accumulator, 2 x Wind-up More details in the attachment!

Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 297683
New in: 1990

used

check Seller: Euro Rubber Lines
Location: uk Land-uk

add to watchlist

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Category: 302 extruders
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 133941356
New in: 2020

new

check Seller: PLASTICO TRADING GmbH & Co.KG
Location: Land-de

add to watchlist

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Category: 302 extruders / Extruders
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 160717824

used

check Seller: PLASTICO TRADING GmbH & Co.KG
Location: Land-de

add to watchlist

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station  ...

Category: 302 extruders / Extruders
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 161297146
New in: 2011

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 21.405 € add to watchlist

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Category: 302 extruders / Extruders
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 162884701
New in: 2011

used

check Seller: Industrio Service Piotr Pruski
Location: Land-pl
VS

add to watchlist

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

Category: 302 extruders / Extruders
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 14001000
New in: 1995

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

Category: 307 rubber machines / Rubber extruders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 16174530
New in: 1980

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Barwell C3 Preformer Extruder 2500 psi Output 600kg/hour Ram type Extruder Extruder size 250mm With Rotary Cutter 8 fixed speeds Year 1980

Category: 302 extruders
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163666381
New in: 1998

used

check Seller: 01machinery s.r.l.
Location: Land-it

add to watchlist

Description Single Screw Extruder Screw diamter 60 L/D 25 Motor power 27,5 k

Category: 302 extruders
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163666382
New in: 2002

used

check Seller: 01machinery s.r.l.
Location: Land-it

add to watchlist

Description Conical Twin Screw Extruder Screws Diameter 45 - 97 Screws Length 390 Barrel zones 3 Nr.1 vent Thermoregulated screws Motor power 15,4 kW Forced feed

Category: 302 extruders
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163666383
New in: 1998

used

check Seller: 01machinery s.r.l.
Location: Land-it

add to watchlist

Description Conical Twin Screw Extruder screw diameter 80 Thermoregulated screws 1 vent Motor power 68 kW

Category: 307 rubber machines / Rubber extruders
Latest update: 23.06.2016 add to watchlist
approved
dealer
ankerimg
item-No.: 14001070
New in: 1988

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
TROESTER 3rd category level
 
RESALE used machinery 25 years online