used TRIPET Round Grinding Machines

Stock number: 3732 INTERNAL CYLINDRICAL GRINDING MACHINE Manufacturer: TRIPET HAUSER HTT CNC , Type: TST 100 CNC-4R Machine NO.: T1000256, Year of construction: 2002 Specifications: Grinding length 300 mm Size internal grinding diameter 0.5-75 mm Center height B axis- 130 mm C-ash main spindle 3" - 100 rpm degree Z ash 340 - 0.0005 mm mm B- Ashes Manuel -30/+60 degree X ash cross slide 50 mm Grinding spindle speeds 4 spindles - 25,000 - 45,000 2x 75000 rpm Resolution 0.0005 mm Tool spindle dock speeds B- axis 10-1500 rpm CNC control. Control Brüsch TPS 3000 Fabr. Accessories: Centering chuck PHM Heyn Pneumatic. 250 mm Ø Papir Filter Knoll Length: 2500 mm, Height: 2300 mm, Width: 2500 mm, Weight: 3500 kg

Internal cylindrical grinding machine, Tripet Swiss, 1991, Grinding slide. 0.5 - 30mm, Grinding Depth: 50, Center Height: 102, Axes: Z , Y, U, B, V, , autom. Chuck...

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features * TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, wit ...

grinding diameter:3 - 150 mm grinding length:200 mm total power requirement:380V, 50Hz, 30 kW dimensions of the machine ca.:5 x 3 x 2,5 m

Control screening machine from Tripette & Renaud Conical sieve basket V-belt drive, 3 kw Wire covering MW 1.2 With outlet funnel The brushes are not good and should be replaced. Otherwise good condition.

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 15 mm Grinding depth: 75 mm Centre height: 60 mm Distance between centres: 125 mm Max. work piece diameter: 80 mm Workpiece spindle speeds: stepless from: 150 rpm up to: 1500 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Possible grinding-spindle speeds: up to: 120000 rpm Grinding table travel: max: 225 mm Table speeds: stepless from: 1 m/min up to: 8 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.3 kW Machine´s weight about: 570 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1400 mm Various accessories: Grinding wheel dressing device Frontal grinding device 3-jaw chuck diameter: 75 mm 3-jaw chuck diameter: 80 mm 4-jaw chuck d ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1 mm Max. internal grinding diameter: 50 mm Grinding depth: 3 - 200 mm Centre height: 132 mm Workpiece spindle speeds: stepless from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Taper in spindle:: 20 W Grinding spindle speeds: from: 16500 rpm up to: 33000 rpm Table speeds: stepless from: 0 m/min up to: 10 m/min Rotatable grinding spindle head (b-axis): 55 ° Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.8 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm Various accessories: Grinding wheel dressing device Frontal grinding device 3-jaw chuck diameter: 125 mm Set of jaws hard Set of jaws Special ba ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1 mm Max. internal grinding diameter: 50 mm Grinding depth: 200 mm Centre height: 132 mm Workpiece spindle speeds: from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Possible grinding-spindle speeds: from: 16500 rpm up to: 120000 rpm Table speeds: stepless up to: 10 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.8 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm Various accessories: Grinding wheel dressing device

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 610 mm Table width: 200 mm Grinding length: 500 mm Grinding width: 200 mm Grinding height: 300 mm Execution: hydraulic Max. distance from table to spindle-centreline: 412 mm Longitudinal travel (X-axis): 530 mm Transversal travel (y axis): 220 mm Automatic cross-feed: stepless up to: 9 m/min Table speeds: stepless up to: 21 m/min Creep feed:: Blockierung Quer (Y) Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: from: 2700 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.5 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1500 mm Various accessories: Coolant system Electrical magnetic chuck: feinpolig Length: 500 mm Width: 200 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 580 mm Table width: 200 mm Grinding length: 500 mm Grinding width: 200 mm Grinding height: 300 mm Execution: hydraulic Longitudinal travel (X-axis): 500 mm Transversal travel (y axis): 180 mm Automatic cross-feed: stepless up to: 9.00 m/min Table speeds: stepless up to: 21.0 m/min Creep feed:: Blockierung Quer (Y) Vertical rapid traverse Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: from: 2700 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1500 mm Various accessories: Paper filter facility Electrical magnetic chuck: WALKER Length: 500 mm Width: 200 mm Wheel trueing attachment Lamp Set o ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 20 mm Grinding depth: 100 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Grinding spindle speeds: from: 90000 rpm up to: 120000 rpm Rotatable grinding spindle head (b-axis): + 45 / - 45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: Automatic internal grinding support: AMI 25 Set of flanges Set of collets: W 12 Lamp Air spindle Set of service tools

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1.0 mm Max. internal grinding diameter: 50 mm Grinding depth: 200 mm Centre height: 132 mm Workpiece spindle speeds: from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Possible grinding-spindle speeds: from: 16500 rpm up to: 120000 rpm Table speeds: stepless up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.80 kW Drive for internal grinding spindle: 3.0 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. internal grinding diameter: 20 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Possible grinding-spindle speeds: from: 6000 rpm up to: 9000 rpm Rotatable grinding spindle head (b-axis): +45 / -45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Horizontal grinding spindle support Set of flanges Set of collets: W 12 Steady External grinding spindle

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 15 mm Grinding depth: 75 mm Centre height: 60 mm Distance between centres: 125 mm Max. work piece diameter: 80 mm Workpiece spindle speeds: stepless from: 150 rpm up to: 1500 rpm Spindle hole: 12 mm Possible grinding-spindle speeds: up to: 120000 rpm Grinding table travel: max: 225 mm Table speeds: stepless from: 1 m/min up to: 8 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.3 kW Machine´s weight about: 650 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1500 mm Various accessories: Wheel trueing attachment 3-jaw chuck: 2x Internal grinding spindle:: JS 80 / JS 120 number: 2 max. speed: 120000 rpm max. speed: 80000 rpm Set of c ...

Grinding wheel flange for Kellenberger / Strausak u.-Miwatec grinding machines type 57 U / W in special design. Questions us please at we do extensive accessories for these machine types.

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Grinding wheel holder for 76 mm bore. More technical info. on request.

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

-Internal grinding spindle -Digital display HEIDENHAIN Centre height 100 mm Top width 450 mm Wheels ø 300 mm Table size 950 x 200 mm Longitudinal stroke 450 mm Spindle cone MK 5 Spindle speed continuously variable 40-650 RPM Table inclination +/-10° degrees Weight 1700 kg Dimensions 1570 x 1100 x 1400 mm