british flag
Resale Logo

Tor used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used store equipment  HERATEC Export u. Bet. GmbH  http://www.heratec.de 
banner logo
start page > keywords Tor > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125494808 1403

FLAT BOTTOM TANK STORAGE TANK cistern rapeseed oil tank liquid manure tank for sale
GP114 PP-H tank 16,300 L chemical resistant


GP114 - used approx. 16.3 m³ / 16,300 litres PP-H tank, aboveground, vertical, flat bottom, in good condition. capacity: approx. 16.3 m³ / 16,300 litres material: PP-H / polypropylene homopolymer diameter: Ø a ...
used machine
 
GP114 - used approx. 16.3 m³ / 16,300 litres PP-H tank, aboveground, vertical, flat bottom, in good condition.

capacity: approx. 16.3 m³ / 16,300 litres
material: PP-H / polypropylene homopolymer
diameter: Ø approx. 2.80 m
height: approx. 2.80
manufactured: 2009

Very good chemical resistance, high stiffness, high surface hardness.

Polypropylene homopolymer tank, aboveground, vertically standing tank with a flat bottom. Round form, access on the front of the tank body, multiple connections, in- and outlets. Tank as shown on the pictures.

For media with a specific weight of up to 1.1 kg/l.

The container can be used as a storage tank for water, feed, liquid feed, manure, seeping juice, rapeseed oil, or as a rain collection tank, water tank, and much more.

Price upon request.

Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us.

More information and offers on our site:
profi-tanks(dot)de
2009
Price  
    request
125499263 109

LUNA MBC8835 for sale
Metal bundling machine Luna MBC8835


The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings sl ...
used machine
 
The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. Compensation of sagging upper roller is realized by longitudinal beam. All rollers are driven. The spinning process is carried out without slip to prevent scratching of the workpiece. CNC - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. All rolls are chrome-plated and polished. All axes are programmable. The machine has the possibility of rolling difficult elliptical shapes.
2010
27,000 EU?  
  PL   request
125489668 101

MATEC Matec 30 SH for sale
Processing Centers


REF.-No. 00495 Description of the system used CNC machining center manufacturer Matec Model Matec 30 SH Year of manufacture 2003 control Bosch type 3 osa workspace X 500 mm Y 400 mm Z 400 mm machine table 1000 x 6 ...
used machine
 
REF.-No. 00495

Description of the system used CNC machining center manufacturer Matec
Model Matec 30 SH
Year of manufacture 2003 control Bosch type 3 osa workspace X 500 mm
Y 400 mm
Z 400 mm machine table 1000 x 600 mm T grooves 6 x 14 H 10 (grid panel) power drilling capacity in St 60 40 mm
Threading in St. 60 24 M
Milling capacity in ST 60 400 cm3/min

Main spindle drive power 40% ED 15-16 kW
Speed range 20-15,000 torque max. 127 NM
2003
Price  
    request
125499268 903

NEW HOLLAND Roll-Belt 150 764 Baler for sale
Round baler New Holland Roll-Belt 150 764 Baler


Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condi ...
used machine
 
Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condition.
2015
24,950 EU?  
  PL   request
125484136 201

GRIGGIO SC 1600 for sale
Panel saws


Code: 0365 Brand: GRIGGIO Model: SC 1600 - Ce Standard Panel saw with tilting blade and scoring unit - CE Standard Technical data: Lenght of cut mm 1600 Width of cut between saw blade and square mm 12 ...

 
Code: 0365
Brand: GRIGGIO
Model: SC 1600 - Ce Standard

Panel saw with tilting blade and scoring unit - CE Standard

Technical data:

Lenght of cut mm 1600
Width of cut between saw blade and square mm 1250
Max height of cut mm 130
Tilting blade 0°-45°
Max blade diameter mm 400
Blade motor Hp 5,5
Scoring unit diameter mm 125 - Motor Hp 0,75
Overall dimensions mounted machine mm 1700 x 2850 x 950 h
Packing dimensions mm 1750 x 1200 x 1000 h
Weight kg 755



 
Price  
  IT   request
125499272 901

MASSEY FERGUSON 3690 for sale
Massey Ferguson 3690 farm tractor


1994
13,750 EU?  
  PL   request
125484134 207

OSAMA S4R/P 1800 for sale
Gluing machines


Code: 0364 Brand: OSAMA Model: S4R/P 1800 - CE Standard 4 Rollers automatic gluing machine with 2 motors with automatic washer suitable for veneer, laminated, multilayer, doors - CE Standard - Year 2002 Wor ...

 
Code: 0364
Brand: OSAMA
Model: S4R/P 1800 - CE Standard

4 Rollers automatic gluing machine with 2 motors with automatic washer suitable for veneer, laminated, multilayer, doors - CE Standard - Year 2002

Working width mm 1800
Working height mm 0-100
Work surface height mm 890
Spreading roller diameter mm 250
Feed speed mt/min 22
Motor power Kw 3
Overall dimensions: mm 2600 x 1100 x 1500 h
Weight kg 1000



 
Price  
  IT   request
125498914 1009

VOLVO EC290C NLC Raupenbagger for sale
Wheeled excavators


; Accessories: Kabine, Klimaanlage - manuell
used machine
 
; Accessories: Kabine, Klimaanlage - manuell
2009
72,000 €  
  AT   request
125480017 101

SMTCL VMC 1051 for sale
Numerically Controlled Machining Centres


Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delive ...
used machine
 
Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delivery immediately cargo Base EX WORK technical details x way 1020 mm y way 510 mm z trail 650 mm CNC CNC FANUC 0I MC FANUC table size 1120 X 510 mm ISO 40 spindle adaptor bt spindle speeds 8000 1/min spindle drive motor (30 min) kW tool changer 15 for 24 tools
maximum table load of 1000 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 30 m / min feed range 20000 mm / min weight 7 tons of space approximately 3.0 x 2.60 x 2,90 m description - control: FANUC OI MC.
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2007
28,000 €  
    request
125496105 901

PÖTTINGER CAT 310T for sale
Tractors


; Accessories: Arbeitsbreite:305, Trommelanzahl (4 Stck.)

 
; Accessories: Arbeitsbreite:305, Trommelanzahl (4 Stck.)
 
Price  
  DE   request
125480011 101

YCM SUPERMAX MV 106 A for sale
Numerically Controlled Machining Centres


Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of o ...
used machine
 
Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of origin Taiwan delivery time immediately cargo base EX WORK technical specifications x way 1020 mm y-way 600 mm z-way 600 mm FANUC CNC control 20 I FANUC table size 1120 X 650 mm spindle retainer ISO 40 spindle speeds 8000 bt 1/min spindle drive motor (30 min) kW tool changer 18 for 24 tools of Max table load 1200 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 12 m / min feed range 1-5000 mm / min weight 7 tons of space approx. 2.90 x 2.60 x 2.50 m description - St FANUC euerung 20 IN the
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2006
27,500 €  
    request
125496107 901

DEUTZ-FAHR KM 22 for sale
Tractors


 
Price  
  DE   request
125480009 110

FISCHER 3000 X 1500 for sale
Measuring Plates


Measuring plate fishing 3000 X 1500 11-99-010 delivery: immediately number: 11-99-010 manufacturer: Fischer type: 3000 x 1500 MACHINE data year: approx. 1994 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 k ...
used machine
 
Measuring plate fishing 3000 X 1500 11-99-010 delivery: immediately number: 11-99-010 manufacturer: Fischer type: 3000 x 1500

MACHINE data year: approx. 1994 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 kg

Very good condition specifications measuring plate length: approx. 3000 mm width: approx. 1500 mm thickness: approx. 350 mm

Accessories â?¢ 4 x tailstock for concentricity measurement â?¢ 2 x bezel for concentricity measurement â?¢ central guide rail for tailstock â?¢ storage feet accessories on request price and other specifications on request
1994
Price  
    request
125496149 903

CLAAS Scorpion 7040 Varip. for sale
Cultivators


; Accessories: Allrad, Kabine, Diesel, Teleskoparm (Bautechnikeinsatz), Geschwindigkeit:40, Hubhöhe:7.1; Maximum lift capacity [kg]: 4400
used machine
 
; Accessories: Allrad, Kabine, Diesel, Teleskoparm (Bautechnikeinsatz), Geschwindigkeit:40, Hubhöhe:7.1; Maximum lift capacity [kg]: 4400
2009
38,800 €  
  DE   request
125480007 110

MESSPLATTE 1500 X 3000 for sale
Measuring Plates


Measuring plate of 1500 x 3000 - 11-99-009 delivery time: immediate number: 11-99-009 manufacturer: measuring plate type: 1500 x 3000 MACHINE data year: approx. 1990 L x W x H: CA. 3000 x 1500 x 1000 mm weight: appro ...
used machine
 
Measuring plate of 1500 x 3000 - 11-99-009 delivery time: immediate number: 11-99-009 manufacturer: measuring plate type: 1500 x 3000

MACHINE data year: approx. 1990 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 kg

Good general condition specifications measuring plate length: approx. 3000 mm width: approx. 1500 mm thickness: 300 mm

Accessories â?¢ storage feet accessories on request price and other specifications on request
1990
Price  
    request
125496193 901

DUBEX M-2A for sale
Tractors


; Working width [cm]: 1200

 
; Working width [cm]: 1200
 
1,250 €  
  DE   request
125480005 109

HOMMEL DURA 1500 X 3000 for sale
Measuring Plates


Measuring plate HOMMEL DURA 1500 X 3000 11-99-008 delivery time: immediate number: 11-99-008 manufacturer: Hommel Dura type: 1500 x 3000 MACHINE data year: approx. 1990 L x W x H: CA. 3000 x 1500 x 1000 mm weight: app ...
used machine
 
Measuring plate HOMMEL DURA 1500 X 3000 11-99-008 delivery time: immediate number: 11-99-008 manufacturer: Hommel Dura type: 1500 x 3000

MACHINE data year: approx. 1990 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 kg

Good general condition specifications measuring plate length: approx. 3000 mm width: approx. 1500 mm thickness: approx. 250 mm

Accessories â?¢ storage feet accessories on request price and other specifications on request
1990
Price  
    request
125496195 901

HOLDER N 250 for sale
Tractors


; Working width [cm]: 2100

 
; Working width [cm]: 2100
 
6,500 €  
  DE   request
125479999 109

GILDEMEISTER MICROSET for sale
Profile Projectors


PROFILE projector & tool before adjusting device Gildemeister MICROSET - 11-01-003-shipping time: immediately number: 11-01-003 manufacturer: Gildemeister type: Microset MACHINE data year: approx. 1986 L x W x H:  ...
used machine
 
PROFILE projector & tool before adjusting device Gildemeister MICROSET - 11-01-003-shipping time: immediately number: 11-01-003 manufacturer: Gildemeister type: Microset

MACHINE data year: approx. 1986 L x W x H: approx. 1800 x 1200 x 1800 mm weight: approximately 1000 kg

Very good condition specifications control / digital display: Quadra - Chek 200 procedures (range): X - axis: approx. 620 mm Y - axis: approx. 300 mm maximum tool length: approx. 625 mm max � Pro�lprojektor: approx. � 400 mm for tool - recorded: ISO 4 0 loading ISO 50 with catchment HSK 100 with reference tool ABS 63 with reference tool ABS 80 with reference tool accessories � complete machine documentation � feet � transport locking devices

Accessories on request price and other specifications on request
1986
Price  
    request
125495611 1009

BOMAG BPR 70/70 D for sale
Mini excavators up to 7t (Mini diggers)


590 kg net weight; Power [PS]: 12; Gross weight [kg]: 590; Engine: Hatz 1D81
used machine
 
590 kg net weight; Power [PS]: 12; Gross weight [kg]: 590; Engine: Hatz 1D81
2014
Price  
  AT   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More TOR models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Gluing machines OSAMA S4R/P 1800


Code: 0364 Brand: OSAMA Model: S4R/P 1800 - CE Standard 4 Rollers automatic gluing machine with 2 motors with automatic washer suitable for veneer, laminated, multilayer, doors - CE Standard - Year 2002 Working width mm 1800 Working height mm 0-100 Work surface height mm 890 Spreading roller diameter mm 250 Feed speed mt/min 22 Motor power Kw 3 Overall dimensions: mm 2600 x 1100 x 1500 h Weight kg 1000

Diesel generators Perkins 2306 - 365 KVA


Diesel generators Iveco V8 - 500 KVA


CNC Turning Machines Colchester TORNADO 200


OVERVIEW: Brand: Colchester Model: TORNADO 200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1995 Production hours: 5900 Location: Germany Origin country: England GENERAL DATA: Measurements width: 2455 mm Measurements depth: 1420 mm Machine weight: 3000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE FANUC Model: Series O-T MOVEMENT: X-AXIS movement: 215 mm Z-AXIS movement: 400 mm WORKPIECE: Workpiece drm: 250 mm TURRET: Number of turrets: 12 TOOLS: Max tool diameter: 40 mm MEDIA: Power consumption: 45 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 29x Tool holder

Macchina utensile per lappatura ACCU-CUT 6SM I ACCU-CUT 6SM I


TECHNICAL CHARACTERISTICS: Bore-maximum: 1.5 ", piece Size-Max OD: 5.0", Distance between spindles: 5,166 ", 6, 8 index Stations: spindles: Index table diameter: 20 "Center from column to table: 13-1/2" Spindle motor: HP 7-1/2, spindle speed: 1200 rpm, variable Feed Rate: 0-200 IPM, Machine dimensions: 58 "(L-R) x 73" (F-B) x 96 (H) Cooling system size: 36 "w x 36" W x 36 "H, Gxsumz2 Weight-approx: 5,500 pounds.

Cooling Unit Robatherm RL 399


Heating medium: Oil Heat output: 400 Mcal/h Motor: 2x 3 kW

Generators Atlas Copco QAS 200 VD


4 identical units available Electronic speed control: 50 HZ / 60 HZ Motor: 6 cylinder Volvo Diesel Motor type: TAD 733 GE Motor power: 179 kW / 50 HZ continious power Alternator: Mecc-Alte ECO 38 - 3S/4 Continious power: 200 kVA Hours of operation: Approx. 5500/6400/6600/7100 - April 2018

Generators Atlas Copco QAS 150


2 identical units available Electronic speed control: 50 HZ / 60 HZ Rated speed: 1500 / 1800 rpm Continious power: 150 / 165 kVA Net power: 132 / 140 kW Motor: 6 cylinder Volvo Diesel Motor type: TAD 731 GE Alternator: Mecc-Alte Hours of operation: Approx. 5900 and 6900 / April 2018

Gas engines MAN E 2876 LE 202


Power: 220 kW Rotation speed: 1500 1/min. Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

Gas engines MAN E 0836 LE 202


Power: 110 kW Rotation speed: 1500 1/min Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

Steam Turbine Backpressure Turbine B+V Industrietechnik MARC 2 - B10


Power: 9210 kW Live-steam pressure: 73 bar Live-steam temperature: 520° C Extraction pressure: 16 - 20 bar Exhaust steam pressure: 1,5 - 2,5 bar Generator: LDW GmbH 14040 kVA Trafo 15000 kVA

CHP Unit Viessmann Vitobloc 200 EM-140


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage parts are reconditioned. Test run was carried out.

Smoke chamber Vemag 2 trolleys


Condition: Overhauled Technical data: • overall dimensions 1600x2500x2900 mm; • 2 trolleys 1000x1000x2000 mm; • power heating 52 kW; • power supply 400 V; • computer control Mikster; • smoke generator Fessmann RZ550 115; • smoke generator dimensions 550x1200x1580 mm; • power engine 0.7 kW; • power heating 1.0 kW.

Diesel engines MWM DEUTZ TBD620V12


2 COGENERATION ENGINES: 2 X MWM-DEUTZ V12 TBD620 YEAR OF MANUFACTURE: 1999 HOURS: approx. 9000 OUTPUT: 1.3Mw ALTERNATOR: LEROY SOMER OUTPUT: 1260 KW / kVA 1300 COMPLETE PLANT •Generator (alternator, engine engine and PLC) •Gas train •Water cooling system (heat exchanger + complete pump) •Oil Cooling System (heat exchanger + complete pump) •Control Panels generator (DIANE) •Electrical control panel accessories (pumps, etc) •Technical Documentation

Self-Cleaning Disc Separator Alfa-Laval BRPX 617


Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties CONTROL Cabinet available

Self-Cleaning Disc Separators Alfa-Laval BRPX 417


BRPX 417: high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted motor, via a belt drive ELECTRICAL CABINET AVAILABLE 2 UNITS AVAILABLE

Granulating mills PREVIERO MU-710 P.R.


PREVIERO GRINDER TYPE MU-710 PR complete with conveyor belt and metal detector closed rotor Grinding chamber : mm.1000 x770 Feeding hopper : 1170 mm x 900 mm 160 kW Motor 6 knives on rotor + 2 knives on stator grid with 14 mm drilling Inspection door for knives replacement Output 2000/2400 kg / h depending on material and grid Electric cabinet Offered completetely reconditioned in 2018 Construction year 1989

Casting press URPEMAK URPE CC 50


Injection molding machine for aluminium URPEMAK URPE CC 50 built in 2005 the year in Spain. Foundry machine URPE URPEMAK CC 50-parameters: -clamping force: 500 kN -Road: 260 mm -the strength of the ejector: 62.8 kN -ejector stroke: 50 mm -height (min-max): 100/325 mm -dimensions: 500 x 500 mm -distance between columns: 320 x 290 mm -diameter: 60 mm -the position of the injection: 0-50 mm -the maximum force-cast: 50 kN -diameter of piston injection: 45-50-55 mm -feed cast: 140 mm -the surface of the casting: 159-196-238 cm2 the mass/volume of injection: 91-140-188 cm3 -injection pressure: 314-254-210 daN/cm2 -the feed piston: 150 mm -motor: 11 kW -weight: 4900 kg -dimensions: ok. 407 x 225 x 220 cm

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Casting press URPEMAK URPE CFA 330


Injection molding machine for aluminium URPEMAK URPE CFA 330 manufactured in 2008 year in Spain. The price of the machine is the crucible to melt zinc, with a capacity of approx. 400 l, visible on the last photo. Foundry machine URPE URPEMAK CFA 330-technical data: -clamping force: 3300 kN -road closure: 510 mm -the strength of the ejector: 181 kN -ejector stroke: 120 mm -height (min-max): 300/700 mm -dimensions: 910 x 910 mm -distance between columns: 572 x 572 mm -diameter: 115 mm -the position of the injection: 0-80-160 mm -the maximum force-cast: 155-350 kN -piston injection: 50-60-70-80 mm -feed cast: 445 mm -the surface of the casting: 170-1089 cm2 the mass/volume of injection: 655-943-1294-1677 cm3 -injection pressure: 308-1782 daN/cm2 -engine: 33 kW -weight: 16000 kg -machine dimensions: 700 x 270 x 290 cm

Automatics (Lathes) For Bars Colchester TORNADO T8MS


OVERVIEW: Brand: Colchester Model: TORNADO T8MS Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2007 Production hours: 1112 Location: Latvia Origin country: United Kingdom GENERAL DATA: Measurements width: 1650 mm Measurements depth: 4000 + 1800 mm Measurements height: 1950 mm Machine weight: 5000 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE Fanuc Model: Series 18i-TB MOVEMENT: X-AXIS movement: 240 mm Z-AXIS movement: 540 mm A-AXIS movement: 625 mm TURRET: Number of turrets: 12 MEDIA: Main electronic connection: 415 V / 53 A / 50 Hz / 3 P Chip conveyer: yes ADDITIONAL EQUIPMENT: 1 - Chip conveyer 2 - Bar loader 3 - Tools (upon request)

Circular press FPA PXW 100 AAb


Press obwiedniowa of varying matrix FPA PXW 100 AAb was built by the factory Automatic Presses Warsaw, Poland-Italy. FPA press-specific data PXW 100 AAb: largest diameter: 100 mm -pressure: 160 T -stroke: 140 mm -the amount of fluctuation matrix: 1500 l/min. -engine power: 17 kW -the engine speed: 3000 l/min. -pump motor power: 11 kW -the engine speed pump drive: 1000 l/min. -the power of pump motor battery: 0.8 kW -the engine speed pump battery: 1500 l/min. -weight of the machine: 53000 kg

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

WIDE BELT SANDER SCM SANDYA UNO CS SCM SANDYA UNO CS


Wide belt sanders Scm Sandya UNO CS working width mm. 900 nr. 2 units I° calibrator unit II° combinet roller/pad motor power KW 7,5 rpm 2800

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Shredder DOPPSTADT AK-430 PROFI


Motor: MERCEDES BENZ diesel engine OM 501 LA, mallet drum dimensions: 1750x1100mm, rotational speed: 850-1000/min, number of mallets: 36, mallet weight: 14.5kg, max. inlet height: 650mm, outlet conveyor dimensions: 4000x1800mm, conveyor speed: 2.25m/s, ejector height: 3000mm, length: 11630mm, width: 2500mm, height: 3000mm.

Cylindrical Grinding Machine TSCHUDIN HTG 430


Center distance: 480mm, center height: 100mm, grinding wheel diameter: 500mm, max. grinding wheel width: 80mm, grinding wheel bore: 203.2mm, motor power: 5.5kW, spindle cone: MK 4, spindle nose: 3x M48, swivelling range: 360°, rotational speed: 65-500/min, quill cone: MK 3, quill stroke: 20mm, length: 2200mm, width: 1700mm, weight: 2.6t.

Grinding Machine DELAPENA SPEEDHONE EM


Working diameter: 1.143-79.375mm, spindle speed: 200-2500/min, motor power: 1.5kW, stroke length: 0-150mm, stroke speed: 60-350double strokes/min, stroke motor power: 0.37kW, length: 1210mm, width: 1210mm, height: 1680mm, weight: 225kg.

Compressor KAESER SK 21


Power: 11kW, motor rotational speed: 2950/min, max. operational overpressure: 11bar, ambient temperature: 3-45°C, operational hours: ca. 48000h.

Zirkon Supra 660


Zirkon Model Supra 660 4 color Year: 1990 Cutoff: 452mm Max speed: 42.000 p/h 1 Enkel reel stand with reel travers 1 Infeed with web guide control 4 Zirkon printing-units with Baldwin alcohol damping and Baldwin blanketwashing 1 Dryer MEG Sigma plus year: 1997 1 Chillstand with webguide and silicon 1 JIMEK Perforater unit 1 superstructure with turnerbars and slitting knives 2 Zirkon folders with one chopper folder and one double chopper 1 Planatol gluing system even crossgluing Bcdjekyxh3 1 Quadtech RGS 4 register controll 1 Quadtech cutoff control 2 Gämmerler trimming RS 92 2 Gämmerler bumpturn 1 IVT tempcontrol ink vibrator, chill roller, alcohol mixer 1 IVT ink distrubition with 4 pumps for ink container connection 2 Color Control pults remote ink 1 Machine Controll pult 1 plate bench and punch Full documention: electrical,mechanical and other manuals! Perfect for 8 page A4 or 16 page A5! Single production or double production 4 page A4 or 8 page A5. We ship worldwide.

Rapid GK 1000 RS


Year 1986 75 kW motor. Available in August.

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

Refrigerating machines Eco refrigerazione IDE 43B10 ED


Description Eco Brand Refrigerazione IDE 43B10 model ED ID 555804 Status Active Price €2,000 + VAT Year of manufacture 2007 Location Bucharest, Romania/Bucharest (RO) Dual discharge industrial unit coolers Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum air flow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (ext./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: 35oC. ExWorks. Price is negotiable. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Technical inspection can be organized at least 24 hrs before the due dates We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Injection molding machines Krauss Maffei 650-3000-2300 BZ


OVERVIEW: Brand: Krauss Maffei Model: 650-3000-2300 BZ Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1996 Production hours: 23471 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 2800 mm Measurements height: 4600 mm Machine weight: 45000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 INJECTION UNIT: Stroke volume: 1096/2411 cm³ Injection pressure: 1254 bar Screw diameter: 100/70 mm CLAMPING UNIT: Clamping force: 6500 kN Opening stroke: 1750 mm Ejector stroke: 250 mm MEDIA: Main electronic connection: 400 V Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 2x Injection unit 2 - KUKA robot 3 - Turning plate (upon request)

CNC Bending Machines AMADA RG1030EV3


OVERVIEW: Brand: AMADA Model: RG1030EV3 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2008 Production hours: 23000 Location: India Country of origin: Japan GENERAL DATA: Measurements width: 2210 mm Measurements depth: 4030 mm Measurements height: 2470 mm Machine weight: 6400 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3100 mm Crowning available: CNC Daylight: 100 mm Throat: 400 mm Main motor power: 7.5 HP CONTROL UNIT: Brand: AMADA Model: NC9 Release: AMNCEv3 MOVEMENT: Backgauge-Z: 450 mm MEDIA: Main electronic connection: 400 V Power consumption: 10 kVA Air pressure: 5 bar Oil tank: 65 L

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Eccentric Presses SMERAL TRNAVA LEN 40 C


Eccentric press SMERAL PRESSES OFFERING TRNAVA LEN 40 C produced in 1985 year in Czechoslovakia. Press-specific data LEN 40 c: -pressure: 40 tons -table surface: 660 x 530 mm -the surface of the slider: 400 x 250 mm -outreach: 265 mm -the distance between the table and the slider: 295 mm -the size of the adjustment between the table and the slider: 80 mm -the number of jumps the slider with continuous movement: 70 or the 142 ppm -number of jumping individual: 50/min -adjustable pitch slider: 8-95 mm -pneumatic coupling, min. air pressure: 0.4 MPa -motor power: 3/4 kW -overall dimensions (l x w x h): 1585 x 1245 x 2370 mm -weight: 4500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

CNC Plasma Cutting Machines MACCHINA TAGLIO PLASMA REDCOM


REDCOM PLASMA CUTTING MACHINE MAKE MODEL YEAR 2008 Redcom EVL 25 18 Modular double Plasma cutting torch, with stock drilling tools. Measurements: 18 x 2.5 mt Hypertherm HPR260 HSD130 models with torches and Generator CNC ESA/GV Datasheet available in the documents section For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

TORNIO HAWK TC 150 M Cincinnati Machine


LATHE HAWK TC 150 M Cincinnati Machine BRAND MODEL TC 150 150 200 YEAR Lathe Hawk HAWK-M complete with: Basic machine with CNC Fanuc 21i-TA Government Supply voltage 400V 50 Hz drip shavings, 12 positions VDI 30 turret to 5-7.5 KW-5500g "ASA spindle/1 ' Autocentrale to 3 jaw Chuck ø 52 mm. radial tool Kit Tools including: form B1, reduction sleeve. For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

gabion mesh production line HEBEI FAKTORY 60X80 / 4300


Line for manufacturing of grid gabionowej HEBEI ANPING WIRE MESH MACHINE FACTORY 60 x 80/4300 was built in the year 2013. Machine for manufacturing of grid gabionowej, hexagonalnej with the following parameters: -manufacturer: Hebei Anping Wire Mesh Machine Factory (China)-the size of the meshes: 60 x 80 mm -maximum width of mesh produced: 4300 mm -wire diameter: 2.0-2.8 mm -capacity: up to 2.5 mb/min. -weight: 18 tons -engine power: 22 kW

Spare parts book Heidelberg Quickmaster 46


Original spare parts book for Heidelberg Quickmaster 46- multiligual and operators manual in the German language. We can send worldwide.

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

CNC GRINDER FOR ROLLERS TSCHUDIN GRENCHEN HTG 342


CNC cylindrical grinder TSCHUDIN GRENCHEN HTG 22 E14 342 type was produced in 1987. In 2008 he underwent a modernisation, which lists: -numerical control system -servo axis -adjustable spindle drive -all electrical equipment: contactors, overload switches, buttons, etc. Technical data: -grinding length: 230 mm -the maximum diameter of grinding: fi 170 -the maximum diameter of the dial: fi 500 mm CNC grinder for shafts TSCHUDIN GRENCHEN HTG 22 E14 type 342 has used Siemens ET200S and servo drives STOEBER.
Get the latest machine offers by email: order newsletter