We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.
used
Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.
used
Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.
used
TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper
used
TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper
used
Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.
used
Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...
used
Dislippering machine Built in 2008
used
Type: Automatic clipping machine DCD 6045 Electro pneumatically controlled Low air consumption Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Automatic looper Automatic string dispenser with bobbin holder Delivery time: 30 working days after payment
used
Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment
new
Manual single clipper Characteristics: Model- KN-6R Number of clips for 1 move- 1 Clip type- In, VR Diameter of casings, mm- 20 – 80 Cutting knife- Immobile Overall dimensions, mm:Length Width Height - 260*420*920 Weight, kg- 12 Weight with packaging, kg- 18
used
Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment
new
Natural Gut / Casing Capping Machine Without nodes without clips
used
We sell here a double clipper from the manufacturer Polyclip, type DCD 6041, in a very good used and functional condition. Working pressure 5-7 bar, complete stainless steel, workshop tested, immediately ready for use, dimensions W/D/H 100/70/90 cm, more on request.
Clipper of bags brand HARTMAN Link width 8 mm Rate 40 strokes/minute
Clipper of bags brand HARTMANN Type EC 101K Link width 8 mm Rate 60 strokes/minute
used
Automatic Double Clipper Poly Clip FCA 3442, diameter up to 75 mm, performance up to 130 cycles/min, suitable for plastic - cellulose - and collagen casings, electronic control.
new
• with base trolley and Stuffing Tube Support • roller conveyor
used
Clipping machine Poly Clip Type: FCA 160 Made of stainless steel and titanium Easy to maintain Low noise level Adjustable conveyor belt speed Dimensions: 1680x1220x2000mm (min) 1800x1300x2150mm (max) Electrical power: 4kW Voltage: 200 – 480V, 50/60 Hz Compressed air: 5 – 7 bar / 0.5 – 0.7 MPa Weight: 625 kg
used
Used PolyClip FCA 3463 is an automatic food clipper used for closing plastic and collagen casings from calibers 40 to 120 mm. Caliber flexibility is achieved by quickly changing clip sizes from 15 to 18 mm and from 30 to 36 mm. Control of the device is achieved via a transparent touch screen. Robust stainless steel design ensures the ease of maintenance and maximum hygiene at work. Equipped with automatic loop feeder. Specifications: Producer: Poly-Clip Model: FCA 3463 Type: Automatic double clipping machine Power: 2.8 kW Dimensions: Length – 1300 mm, Width – 1575 mm, Height – 2170 mm Weight: 625 kg.
used
The PolyClip FCA 3430 is an automatic clipper, stands out as a dependable and high-quality tool for clipping a range of casings, accommodating sizes from 24-60mm and up to 90mm for plastic types. This device is compatible with various stuffers that have portioning capabilities. The FCA 3430 can perform up to 200 cycles per minute. Its operation is managed through an intuitive, clear touch screen. The machine’s durable stainless steel construction contributes to its extended lifespan. Specifications: Manufacturer: Poly-Clip Model: FCA 3430 Dimensions: Height – 2015 mm, Width – 1445 mm, Length – 1200 mm Weight: 570 kg Power Supply: 400V 50Hz 3N Efficiency: Capable of 200 cycles per minute.
used
Used PolyClip FCA 3463 is an automatic food clipper used for closing plastic and collagen casings from calibers 40 to 120 mm. Caliber flexibility is achieved by quickly changing clip sizes from 15 to 18 mm and from 30 to 36 mm. Equipped with automatic loop feeder. Producer: Poly-clip Model: FCA 3463 Type: Automatic double clipping machine Power: 2.8 kW Dimensions: L 1300 mm x W 1575 mm x H 2170 mm Weight: 625 kg
used
Table Clipper Tipper Tie TCNA 200, Weight approx. 12kg, used, fully functional
used
POLY CLIP ICA 8700 YEAR 2008 CALIBER UP TO 200 MM
used
Poly-clip PDC 600 Semi Automatic Double Clipper, for fibrous, plastic, natural and collagen casings, calibres up to 90 mm, on a trolley, Suitable for following clip sizes: S 625 / 628 / 632 / 638, upon request with separator, in good condition!