british flag
Resale Logo

Thread used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information warehouse equipment  Lücht und Palm Handelsgesellschaft mbH  http://www.luecht-palm.de 
banner logo
start page > keywords Thread > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465300 109

Hagen & Goebel HG-8E for sale
Thread Drills


Automatic tapping machine with leadscrew Cap M3 to M8 in steel M12 in messing and aluminium With several leadscrews Dubble tapping head All on a table

 
Automatic tapping machine with leadscrew
Cap M3 to M8 in steel
M12 in messing and aluminium
With several leadscrews
Dubble tapping head
All on a table
 
Price  
    request
125460549 1900

WAGNER LEOPARD 35-70 for sale
Piston Pump


Weight approx.: 70 kgDimensions (l x w x h) approx.: 1100 x 900 x 1400 mmDescription: Mobile, with spray guns, pneumatic hoses, technical data: transmission ratio 35:1, volume flow per double stroke 70 cm3/cc, max. opera ...

 
Weight approx.: 70 kg
Dimensions (l x w x h) approx.: 1100 x 900 x 1400 mm
Description: Mobile, with spray guns, pneumatic hoses, technical data: transmission ratio 35:1, volume flow per double stroke 70 cm3/cc, max. operating overpressure 25 Mpa/ 250 bar, max. possible number of strokes in operation: 60, diameter air inlet internal thread: G 1/2 , see photos for details
 
used machinery auction RESALE 110 €  
  DE   request
125452253 101

ELHA FBM 2700 for sale
Drilling And Boring Machines


FLANGES - drill ELHA FBM 2700 - 02-99-002 delivery time: immediate number: 02-99-002 manufacturer: ELHA type: FBM 2700 MACHINE data year: approx. 1984 L x W x H: CA. 3500 x 1500 x 2600 mm weight: approx. 5500 kg GO ...
used machine
 
FLANGES - drill ELHA FBM 2700 - 02-99-002 delivery time: immediate number: 02-99-002 manufacturer: ELHA type: FBM 2700

MACHINE data year: approx. 1984 L x W x H: CA. 3500 x 1500 x 2600 mm weight: approx. 5500 kg

GOOD GENERAL CONDITION

TECHNICAL DATA FLANGE BORHMASCHINE
Maximum drilling diameter steel: approx. Ã? 52 mm max drilling diameter in cast: approx. Ã? 60 mm tool holder: MK 5 Max swing: approx. Ã? 2700 mm speed range: approx. 20-1400 RPM projection: approx. 500-1200 mm traverse path Y - axis (manual): approx. 700 mm max. Height: approx. 600 mm Quill stroke: approx. 300 mm Tischaufspannï¬?äche: approx. Ã? 1250 mm power: 15 kW automatic drill bit feed: approx. 0.1 - 0.35 mm / U thread cutting performance: M 36 accessories â?¢ motor part Setup (hole number 2 - 48 holes / core (g) manually / feed & express gear â?¢ 3 - bake - chuck Ã? 500 mm â?¢ incl. 1 set of JAWS

â?¢ Manual / automatic - operation â?¢ right / left rotation â?¢ central lubrication â?¢ thread cutting device â?¢ emergency â?¢ coolant system â?¢ work lamps â?¢ drill depth stop â?¢ hand crank Y - adjustment

Accessories on request price and other specifications on request
1984
Price  
    request
125460595 1900

Workshop Cabinet with Contents


Weight approx.: 400 kgDimensions (l x w x h) approx.: 1500 x 800 x 2150 mmDescription: Steel cabinet, contents: various turning tools, thread cutting spindle GB 2 A for M 5 to M 16, hand reamers, dies, drill chuck, see p ...

 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 1500 x 800 x 2150 mm
Description: Steel cabinet, contents: various turning tools, thread cutting spindle GB 2 A for M 5 to M 16, hand reamers, dies, drill chuck, see photos for details
 
used machinery auction RESALE 65 €  
  DE   request
125452251 101

HÜLLER & HILLE UG 24 for sale


TAPPING machine HÃ?LLER & HILLE UG 24 - 02-08-003-shipping time: immediately number: 02-08-003 manufacturer: Hüller Hille & type: UG 24 MACHINE data built: approx. 1991 L x W x H: approx. 600 x 800 x 1 ...
used machine
 
TAPPING machine HÃ?LLER & HILLE UG 24 - 02-08-003-shipping time: immediately number: 02-08-003 manufacturer: Hüller Hille & type: UG 24

MACHINE data built: approx. 1991 L x W x H: approx. 600 x 800 x 1800 mm weight: approximately 400 kg of very good general condition specifications maximum thread area in steel: approx. M 3 - M 24 max range of threaded in cast: M 3 - M 30 head swiveling: 360 degrees of Werkzeugspannsys TEM: Bilz - clamping system speed range: approx. 250-500 rpm projection: approx. 260 mm Tischaufspannï¬?äche: approx. 390 x 300 mm Quill stroke: approx. 100 mm distance table - spindle: approx. 50-500 mm working height: 880 mm accessories â?¢ various change gears â?¢ various Bilz -. Clamping recordings â?¢ various compensation chucks â?¢ foot switch â?¢ emergency - off â?¢ electrical cam - limit switch â?¢ left / right - run

Accessories on request price and other specifications on request
1991
Price  
    request
125460387 1900

Lot of Measuring Instruments


Weight approx.: 6 kgDimensions (l x w x h) approx.: 600 x 300 x 100 mmDescription: Various outside micrometers, height scribers, thread gauges, etc., see photos for details

 
Weight approx.: 6 kg
Dimensions (l x w x h) approx.: 600 x 300 x 100 mm
Description: Various outside micrometers, height scribers, thread gauges, etc., see photos for details
 
used machinery auction RESALE 25 €  
  GB   request
125451820 102

POLYGIM DIAMOND 32 CSB SWISS TYPE for sale
CNC Long Turning Automatics


Swiss type lathe POLYGIM DIAMOND 32 CSB SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND 32 CSB SWISS TYPE: CNC control: MITSUBISHI Working range: - maximum turning diameter: 33 mm - ...
used machine
 
Swiss type lathe POLYGIM DIAMOND 32 CSB SWISS TYPE was built in 2008.

Technical data for CNC lathes POLYGIM DIAMOND 32 CSB SWISS TYPE:

CNC control: MITSUBISHI

Working range:
- maximum turning diameter: 33 mm
- maximum turning length: 250 mm
- maximum drilling diameter: fi 15 mm
- maximum threading diameter: M10

Processing of external diameters:
- number of tools: 5 items
- cap dimension: 16 x 16 x 120 mm

Processing of internal diameters:
- number of tools: 4 pcs
- bushing dimension: 13 mm (ER20)

Transverse driven tools:
- number of tools: 3 pcs
- bushing dimension: 13 mm (ER20)
- rotational speed: 200-6000 revolutions per minute.

Tools from the back to the inside diameter:
- number of tools: 4 pcs
- bushing dimension: 13 mm (ER20)

Tool driven to face:
- number of tools: 3 front, 3 rear
- sleeve size: 10 mm (ER16)
- rotational speed: 3000 rpm.

Main spindle:
- spindle bore diameter: fi 36 mm
- spindle speed: 200-8000 rpm.

Counter spindle:
- diameter of the revision spindle bore: fi 36 mm
- reel spindle speed: 6000 rpm.
- maximum spindle travel: 220 mm
- quick feeds X, Y, Z: 18 m / min.

Engines:
- main spindle motor: 5.5 kW
- re-spindle motor: 1.5 kW
- drive motors X / Y / Z axis: 0.5 kW
- coolant pump motor: 0.55 kW
- lubrication: 4 W
- power supply: 8.67 kW
- spindle axis height: 960 mm

Machine dimensions:
- dimensions: 2550 x 1140 x 1568 mm
- weight: 2788 kg

Compressed air supply:
- expenditure: 10 l / min.
- pressure: 5 kg / cm

Equipment:
- intercepting spindle
- workspace lighting
- cooling system
- counter-spindle orientation every 5 degrees
- detail cut-off sensor
- part receiver
- guide ring for the fixed and rotating rod
- 5 pieces for turning the outer surface
- 4 pieces of stationary holders for turning the inside surface
- 4 positions for stationary tools for turning the inner surface from the back
- 6 positions for tools driven for lateral work
- 3 positions for power tools for work from the front
- 3 positions for work tools from the rear
- automatic bar feeder: Fedek SUNNY 542 (3.2 m)
- chip conveyor
2008
43,750 €  
  PL   request
125443109 102

SELICA SC-32 for sale
SELICA SC 32 CNC lathe


CNC lathe - a numerically controlled machine tool designed for machining objects most often with a surface of solids (shafts, cones, balls, internal and external threads). The machining tool is most often a turning tool, ...
used machine
 
CNC lathe - a numerically controlled machine tool designed for machining objects most often with a surface of solids (shafts, cones, balls, internal and external threads). The machining tool is most often a turning tool, a drill bit or threading tools, additionally two tools with a separate one drive. The gang tool system consists in the application of many tools permanently installed in the lathe and their use during the production process. Machining on a lathe is called turning. Turning is performed by turning the workpiece into a rotary motion, and then cutting its surface with a machining tool. The workpiece is fastened for this purpose in the holder with the use of various frames, provided that the workpiece has a diameter of no more than 32 mm.
2016
29,200 EU?  
  PL   request
125437034 101  

TOS VARNSDORF W9 for sale
Boring Mills


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-4 ...
used machine
 
Horizontal boring machine W9
TOS Varnsdorf
K.102259
Diameter of working spindle mm 90
Depth of working spindle mm 710
Vertical spindle adjustment mm 900 (1120)
Spindle speed:
number of degrees 21
range min-1 14-400
Spindle speed with removable faceplate
number of degrees 18
range min-1 28-1400
Speed of the face plate
number of degrees 12
range min-1 14-180
Working feeds:
18 degrees in the mm / rev range 0.016-0.8
18 degrees in the range of mm min-1 12.5-600
Micro-axis mm min-1 5
Rapid traverse mm min-1 2400
Threads:
18 metric with pitch mm 0.25-12
24 Whitworth threads / 1 "120-2
Electric motor kW 7.5
Machine dimensions:
length mm 3900 (4750, 5120)
width mm 2500 (2600)
Height mm 2650 (2875)
1967
Price  
  AT   request
125442637 110  

ROLLERS Robot 2 und 4 for sale
manual


manual for threading-machine Rollers Robot 2 and 4(24 pages)
used machine
 
manual for threading-machine Rollers Robot 2 and 4
(24 pages)
2008
Price  
  DE   request
125437000 101

Z 3050 X 16 for sale
Radial Drilling Machines


Radial drilling machine Z 3050 X 16 was built in 1989. It is a universal general purpose machine tool. Suitable for drilling, countersinking, reaming, chamfering and threading of medium and large parts. With proper equip ...
used machine
 
Radial drilling machine Z 3050 X 16 was built in 1989. It is a universal general purpose machine tool. Suitable for drilling, countersinking, reaming, chamfering and threading of medium and large parts. With proper equipment it is also possible to boring.

Technical data for the Z3050 X 16 drill:
- maximum drilling diameter: 50 mm
- maximum working range: 1600 mm
- maximum distance between spindle axis and column: 1600 mm
- the minimum distance between the spindle axis and the column: 350 mm
- horizontal travel of the spindle head on the arm: 1250 mm
- maximum distance from the spindle face to the working surface of the base plate: 1220 mm (1250 mm)
- minimum distance from the spindle face to the working surface of the base plate: 320 mm (350 mm)
- vertical arm displacement on the column: 580 mm
- arm lifting speed: 0.02 m / sec.
- arm rotation angle: 360 degrees
- cone spindle: Morsea Nr. 5
- spindle speed range: 25-2000 rpm.
- spindle speed: 16 items
- spindle feed range: 0.04-3.2 mm / rev.
- number of spindle feeds: 16 items
- spindle extension: 315 mm
- feed depth for rotation of the dial with a scale: 122.5 mm
- maximum allowable torque on the spindle: 490 Nm
- maximum permissible spindle feed pressure: 15680 N
- main engine power: 4 kW
- lifting power of the arm: 1.5 kW
- hydraulic lock motor power: 0.75 kW
- Coolant pump motor power: 0.09 kW
- Overall dimensions (L x W x H): 2500 x 1060 x 2655 mm
- machine weight: approx. 3500 kg (3900 kg with auxiliary column)
1989
7,125 €  
  PL   request
125442518 110

Die for external threads versch.


 
Price  
  DE   request
125436726 102

POREBA TCA 160 for sale
Heavy Lathes


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Operating range : - tusks elevation: 800 mm - maximum turning diameter over the bed: 1600 mm  ...
used machine
 
Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA.

Technical data of lathe POREBA TCA 160:
Operating range :
- tusks elevation: 800 mm
- maximum turning diameter over the bed: 1600 mm
- maximum turning diameter over the slide: 1300 mm
- eyepiece: fi 800 mm
- maximum diameter of turning in semi-shank: 250 mm
- maximum turning length: 6000 mm
- maximum weight of the workpiece in centers: 16000 kG
- acceptable cross-section of the chip (for turning steel Rr = 60 kg / mm2) on one slide: 30 mm2
- acceptable cross-section of the chip (when turning steel Rr = 60 kg / mm2) on one slide: 50 mm2
- allowable force on the knife: 6000 kG
- allowable torque on the spindle: 630000 kGcm
- maximum cross-cut of the knife stem: 70 x 70 mm

Headstock:
- spindle speed: 24 n
- speed ratio exponent: 1.25
- spindle speed range: 1.12-224 rpm, 1.12-224 rpm, 0.85-170 rpm.
- diameter of the front spindle journal: 260 mm
- slot in the metric cone spindle: No. 120
- reduction sleeve for metric cone canes: No. 120/80
- diameter of the hole in the spindle: 105 mm
- diameter of the grip wheel: 1600 mm

Support, normal feeds:
- 20 longitudinal feeds in the range: 0.19-5.0 mm / rev.
- 20 cross feeds in the range: 0.095 - 2.5 mm / rev.
- 20 feeds on the top drawer in the range: 0.095-2.5 mm / rev.

Support, eight-feeds:
- 20 longitudinal feeds in the range: 1.5-40 mm / rev.
- 20 cross feeds in the range: 0.75-20.0 mm / rev.
- 20 feeds on the top drawer in the range: 0.75-20.0 mm / rev.

Support, minute feeds:
- 20 longitudinal feeds in the range: 12-320 mm / rev.
- 20 cross feeds in the range: 6-160 mm / rev.
- 20 feeds on the top drawer with a range of 6-160 mm / rev.

Support, threading feeds (main screw train):
- 35 threads of thread metric about the range : 1-50 mm
- 35 increments of inch threads in the range: 24 - 1/2 coil / inch

Support, threading feeds on the top drawer:
- 25 threads pitch metric about the range 0.25-7 mm
- 35 increments of inch / roll threads. : 28-3 coil / inch
Feeds associated with turning of cones with inclinations forming: from 1: 1.5 d 1: 1000
- rapid traverse: 4000 mm / min.

Konik:
- diameter of the sleeve: 200 mm
- sleeve travel: 600 mm
- slot in the conical spindle meter .: No. 80
- transverse offset: + -30 mm

Glasses:
- scope of regulation of diameters of the eyepiece of normal equipment: 200-500, 200-600, 300-800 mm
- scope of regulation of the diameters of the special equipment eyepiece: 30-300, 50-400, 200-500 mm

Hemocular:
- semi-barrel diameters adjustment range: 50-250 mm

Drive:
- main engine power: 40 kW
- main engine speed: 750 rpm.
- fast feed motor power: 2.2 kW
- speed of the motor of rapid feeds: 3000 rpm.
- oil pump motor power: 0.37 kW
- engine speed of the oil pump: 1500 rpm.
- oil pump capacity: 25 l / min.

Size and weight:
- distance between centers: 3000-15000 mm
- weight at 6000 mm and 1 support: approx. 30000 kg
- additional weight over the difference of 1000 mm: 1200 kg
- weight of an additional slide: 1500 kg
1959
28,750 €  
  PL   request
125386595 103

HECKERT GFL 400 x 1000 for sale
Thread and Worm Milling Machine


workpiece diameter: 400 mmthreading length: 2000 mmthread pitch: 1 - 1000 mmspindle bore: 80 mmmax. milling cutter diameter: 120 mmmax. module: 12 weight of the machine ca.: 4,5 tChange gears, small universal milling hea ...

 
workpiece diameter: 400 mm
threading length: 2000 mm
thread pitch: 1 - 1000 mm
spindle bore: 80 mm
max. milling cutter diameter: 120 mm
max. module: 12
weight of the machine ca.: 4,5 t
Change gears, small universal milling head, good condition.



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125436705 102

PONAR REMO KEPNO TUX 63 B for sale
Universal Lathes Up To 800 Mm Diameter


PONAR REMO KEPNO TUX 63 B lathe was built in the PONAR REMO KEPNO factory in 2006. Technical data of the TUX 63B lathe: - maximum turning diameter over the bed: 630 mm - maximum turning diameter over the slide: 380  ...
used machine
 
PONAR REMO KEPNO TUX 63 B lathe was built in the PONAR REMO KEPNO factory in 2006.

Technical data of the TUX 63B lathe:
- maximum turning diameter over the bed: 630 mm
- maximum turning diameter over the slide: 380 mm
- maximum turning length in centers: 1500 mm
- socket in the spindle, metric cone: 80 mm
- spindle passage: 71.5 mm
- bed width: 433 mm
- Morse tailstock socket: 5
- travel of the tailstock bushing: 180 mm
- diameter of the tailstock sleeve: 90 mm
- spindle speed range: 18-1800 rpm.
- spindle speed: 21
- number of feeds over the entire spindle rev range: 42
- longitudinal feed range: 0.08-3.26 mm / rev.
- transverse feed range: 0.04-1.63 mm / rev.
- number of metric threads: 42
- metric thread range: 1-88 mm
- number of modular threads: 42
- range of modular threads: 1-88 II mm
- number of inch threads: 42
- inch thread range: 1-88 in / 1 "
- number of DP threads: 42
- range of DP: 1-88 DP threads
- fast slide travel: 4.2 m / min
- operating moment on the spindle: 980 Nm
- maximum torque on the spindle (5 minutes): 1960 Nm
- lead screw pitch: 6 mm
- travel of the cross slide bolt: 5 mm
- maximum cross-cut of the knife stem: 32 x 20 mm
- synchronous motor speed: 750/1500 rpm.
- main drive motor power: 3.9 / 7.2 kW
- dimensions: 3130 x 1140 x 1285 mm
- machine weight: 3200 kg
2006
7,500 €  
  PL   request
125386599 1104

STANKO 50822 W for sale
Thread Grinding Machine


thread dia.: 160 mmgrinding length: 1450 mmthread pitch: stufenlos CNC mmControl: Siemens Sicomtotal power requirement: 20 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 3,5x2x1,8 mThis ad was created wit ...
used machine
 
thread dia.: 160 mm
grinding length: 1450 mm
thread pitch: stufenlos CNC mm
Control: Siemens Sicom
total power requirement: 20 kW
weight of the machine ca.: 6 t
dimensions of the machine ca.: 3,5x2x1,8 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1983
Price  
    request
125374602 101

GILLARDON GB 30 V TEILÜBERHOLT for sale
Column-Type Drilling Machines


COLUMN drilling machine GILLARDON GB 30 V without -02-04-040 delivery: upon request number: 02-04-040 manufacturer: Gillardon type: GB 30 V MACHINE data year: approx. 1985 L x W x H: approx. 600 x 600 x 1800 mm weigh ...
used machine
 
COLUMN drilling machine GILLARDON GB 30 V without -02-04-040 delivery: upon request number: 02-04-040 manufacturer: Gillardon type: GB 30 V

MACHINE data year: approx. 1985 L x W x H: approx. 600 x 600 x 1800 mm weight: ca. 400 kg
Very good condition - without - picture similar
(Click on without to see the extent of the overhaul)

TECHNICAL data maximum drilling diameter in steel: dia. 32 mm maximum drilling diameter in cast: approx. Ã? 42 mm tool holder: MK 3 speed range: approx. 60-1600 rpm projection: approx. 320 mm column diameter: approx. Ã? 120 mm Quill stroke: approx. 175 mm Tischaufspannï¬?ä surface: approx. 450 x 355 mm of automatic drill feed: approx. 0.1 - 0.25 mm / U thread cutting device: Max M 24 accessories â?¢ Chuck new â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency â?¢ analogue RPM indicator â?¢ For table adjustment hand crank â?¢ foot switch â?¢ machine feet

Accessories on request price and other specifications on request
1985
Price  
    request
125386607 104

MATRIX MAC 5481 for sale
Thread Grinding Machine


thread dia.: 160 mmgrinding length: 480 mmthread pitch: stufenlos CNC mmControl: Siemens Sicomtotal power requirement: 10 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3x2,4x mThis ad was created with MO ...
used machine
 
thread dia.: 160 mm
grinding length: 480 mm
thread pitch: stufenlos CNC mm
Control: Siemens Sicom
total power requirement: 10 kW
weight of the machine ca.: 5 t
dimensions of the machine ca.: 3x2,4x m



This ad was created with MODUL MWS - the software solution of LogoTech.
2010
Price  
    request
125355428 107

TRUMPF TruMatic 3000 fiber (K04) for sale
CNC Laser Cutting Machines


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser ...
used machine
 
OVERVIEW:
Brand: Trumpf
Model: TruMatic 3000 fiber (K04)
Application type: Laser Cutting
Machine type: Laser Punch Combination Machine
Availability: September
Construction year: 2011
Production hours: 34000
Laser hours: 33000
Location: Spain

MAIN DRIVE:
Laser power: 3000 kW
Punching force: 165 kN

CONTROL UNIT:
Brand: Siemens

MOVEMENT:
X-AXIS:
Movement: 2500 mm
Y-AXIS:
Movement: 1250 mm

WORKPIECE:
Workpiece weight: 120 kg

MAX MATERIAL THICKNESS:
Steel: 4 mm

ADDITIONAL EQUIPMENT:
1 - MultiTool function
2 - MultiBend function
3 - Thread shaped function
4 - Fast marking / grooving function
5 - Function roller technology and deburring
6 - Additional clamping claw
7 - Repositioning cylinder with moving parts in height
8 - Small parts sensor for ramp evacuation
9 - Mounting on mattress
10 - Chip conveyor with folding tank
11 - Deformed sheet metal detection
12 - Teleservice via and modem
13 - SheetMaster (2500 x 1250)
14 - Off / Load parallel to the main time
15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250)
16 - Suction cup frame
17 - Disp. Load control
18 - GripMaster (2500 x 1250)
19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm)
20 - Double trolley load incl. connection with warehouse
21 - 18 RTC cassettes incl. Matrix plate
22 - QuickSet
23 - Conveyor belt parts
24 - TruTops Punch License
25 - Includes € 40,000 in tooling
2011
Price  
  ES   request
125386587 107

TRUMPF TC 600 L for sale
Stamping and Punching Machine


sheet width: 1250 mmplate length: 2500 mmplate thickness: 8 mmPunching force: 22 tolaser capacity in Watt: 2.400 weight of the machine ca.: 16.700 kgAccessories / equipment:- Laser: 1.8 kW- Operating hours (05.02.2016):  ...
used machine
 
sheet width: 1250 mm
plate length: 2500 mm
plate thickness: 8 mm
Punching force: 22 to
laser capacity in Watt: 2.400
weight of the machine ca.: 16.700 kg
Accessories / equipment:
- Laser: 1.8 kW
- Operating hours (05.02.2016): 75.570 h
- Laser hours: 57.099 h
- Ray hours: 12.932 h
- TrumaGrip
- TrumaSort R4
- SheetMaster
- Multitool
- Softpunch
- Threading
- Signing
- 3 claws
- Sensor levers
- Buckle detection
- Storage interface
- Scratch-free machining
- Automation
- Scissor lift table



This ad was created with MODUL MWS - the software solution of LogoTech.
1998
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Universal Lathes Up To 800 Mm Diameter Poreba TCA-1600/6000


The device is used for machining the outer, inner and front surfaces of rotary components of larger shaft and flange diameters, threading. POREBA - TCA 160/6000 - 1962 - d1600/6000 - 2-3 steadies

Bottle Capper 45000 bph for aluminum caps AROL, Italy EURO VA IES EVO Light


Bottle Capper AROL EURO VA for Aluminum Caps, 45000 bph This bottle capper was installed in 2017 and has very limited operating hours. It has been capping glass bottles with aluminum threaded caps. Capper is made of stainless steel and can be washed. The machine is still working and in excellent condition. Manufacturer: AROL, Italy Type: EURO VA IES EVO LIGHT Year: 2017 Operating hours approx. 1500 h Capacity: up to 45000 bph Capping heads: 4 pieces Pitch: 288 mm Certificate: CE

Extruders COMPACT SYSTEM T20


Extrusion line model: Compact System T20 YOM: 2005 Working hours: 4,000 h Production: 50-60 Kg/h Sheet width = 1500mm / 2000mm Materials: PE and PP Different head extruder: It could produce threads. Number of threads = 35-40

SLITTER CORINO - BIANCO TAGLIERINA


CORINO AND BIANCO SLITTER FOR TUBULAR KNITS, MODEL TAGLIERINA. YEAR 1995 ROLLER WIDTH 2400 MM AUTOMATIC DETWISTER MTG THREAD COLLECTOR EXIT BY FOLDER

EDM Machines MITSUBISHI FX30K 5 axis wire erosion 2001


The MITSUBISHI FX30K wire EDM used is a large-scale 5-axis erosion with a fixed bench; the strokes X 750, s 500, with 350 mm, dimensions table 1.100 x 875 mm capacity 2 kg, dimensions of the piece 1.300 x 800 x 345 mm, complete with automatic threading, r ...

Sewing machine Muller Martini FK-1-S


Sewing machine Müller Martini Model FK-1-S Year ± 1950 Min. size 40 x 60 Max size 250 x 350 mm Stitches 1-5 Details Independent thread tensioning with cutting function Available direct

Veneer joining machines VILLA F 40


Code: 0617 Brand: VILLA Model: F 40 - CE Standard Thread Splicer Veneer - CE Standard - Year 2009 Technical features: Desk dimension in area 1000 x 2000 mm Three feed speeds m / 1 '20-28-40 Thickness on the jointable veneers 0.4 mm 3 Motor  ...

Longitudinal Turning Machines (Lathes) TORNOS M 7 - 6 units


-6 off M7 (4 off with 13Y-3 spindle att.) - Serial no. 45717/65938/65940/65805(1 spindle + milling att.14DA,evacuation long part after milling)/85547(+ long part att.17ND)/96984(1 spindle + counter-thread cutter 12CB)- one machine equipped with gravity fe ...

Thread Rolling Maschines ORT RP 30 U


TYPE: Hydraulic T: 30 ROLLERS NUMBER: 2 RACK LENGTH: 200 mm. Capacity: Ø 4 ÷ 100 x 10 mm. Weight: 2800 kg. Notes: Tilting spindles

Thread Grinding machine STANKO 5822M


Max dia workpiece 200 mm Max length worpiece 500 mm Grinding wheel 300..400 mm

Thread Grinder STANKO 5K822B


grinding diameter 200 mm grinding length 500 mm max. grinding wheel diameter 400 mm max. workpiece weight 30 kg

Tapping Machines ASPE M 10 V TR


Type: tapping machine with rotary table Thread length: 75 mm. Maximum diameter: M 10 ÷ 12 M STEP 1:0.8 0.7 ÷ ÷ ÷ MAX 1.25 Power: 4 kW Weight: 1200 Kg. Dimensions: 1400 x 1200 x 2300 mm. YEAR built: 2001 Notes: Progress through patron-0 ÷ 3000 rpm ...

Tapping Machines VIGEL M 65 T


Type: tapping machine with rotary table Thread length: 55 mm. Maximum diameter: M 10 ÷ M 14 STEP: 1.25 ÷ 2 Power: 1.5 kW Weight: 360 Kg. Dimensions: 680 x 1800 x 800 mm. YEAR built: 1974 Notes: Progress through patron-spindle speed 0 ÷ 1400 rpm  ...

Sewing machine Muller Martini FK-1-S


Sewing machine Müller Martini Model FK-1-S Year 1960 Min. size 40 x 60 Max size 250 x 350 mm Stitches 1-5 Details Independend thread tensioning with cutting function Available direct

Sewing machine Muller Martini FK-1-S


Sewing machine Müller Martini Model FK-1-S Year ± 1950 Min. size 40 x 60 Max size 250 x 350 mm Stitches 1-5 Details Independend thread tensioning with cutting function Available direct

High Precision Turning Machines (Lathes) SCHAUBLIN 135


Tour of precision to roughing and threading SCHAUBLIN 135: Features: -Height of centers: 135 mm,. -Remote system: 630 mm,. -Admitted above the bench diameter: 315 mm. -Speed of 55 to 3000 rpm-controlled mechanical drive (without floors), -Nose p ...

WIRE EDM FANUC ALFA 0A


constructed in 1994 used RICONDIZIONATA He ran X 300, Y 200, Z 160 mm maximum dimensions of the workpiece 400 x 300 x 150 mm per 500 kg complete with refrigerator for immersion processing with maximum performance but without automatic wire threading  ...

Multi Spindle Drilling Machines MASTERWOOD K/21


Code: 0253 Brand: MASTERWOOD Model: K/21 Multi boring machine with 21 chucks Technical data N° 21 drill chucks with threaded connection Center distance between chucks mm 32 Max drilling capacity mm 640 Max vertical drilling depth mm 75 ...

Thread Rolling Machines ORT RP18C


ORT RP18C 2-roll 18 ton swivelling heads for through feed and plunge PLC+brushless motors controlled position+controlled pressure machine under power in our warehouse

Thread Rolling Machines Profiroll Bad Dueben PRZ 80 CNC


THREAD ROLLER, CYLINDRICAL, 2 DIE Profiroll Bad Duben PRZ 80 CNC-AC CNC TWO DIE CYLINDRICAL THREAD ROLLING MACHINE Maximum Rolling Pressure: 80 Tons (800kN) Maximum Rolling Diameter Infeed : 160mm Spindel dia: 100mm Swivel Angle: max. ±10 Die m ...

Thread Rolling Machines ORT RP 90


TYPE: Hydraulic T: 90 ROLLERS NUMBER: 2 RACK LENGTH: 300 mm. Capacity: Ø 10 ÷ 160 x 16 mm. Power: 60 kW Weight: 10000 Kg. YEAR built: 1992 Notes: Spindle diameter 100 mm. -Roller diameter 190 ÷ 310 mm. -Main motor power 55 kW Accessories: Loadi ...

Thread Rolling Machines MAGNAGHI T 12


TYPE: Hydraulic T: 15 ROLLERS NUMBER: 2 RACK LENGTH: 120 mm. Capacity: Ø 3 ÷ 75 mm. Power: 4.75 Hp. Weight: 1200 Kg Notes: Step 0.5 ÷ 5 mm. -Spindle Diameter 54 mm.

Thread Rolling Machines MICHIGAN ROTO-FLO 3725


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. Power: 19 Kw YEAR built: 2000 Notes: Performs processing of rolling and threading-1650 mm total stroke. -Can mount 330 + 330 mm 610 + racks simultaneously. Accessories: Siemens Simatic S5-100 ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3225


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. YEAR built: 1997 Notes: Performs processing of rolling and threading-1260 mm total stroke. -330 mm 610 + racks can be mounted. or 330 330 330 + 3 simultaneously from racks + mm. Accessories: S ...

Thread Rolling Machines ORT RP 30 U


TYPE: Hydraulic T: 31 ROLLERS NUMBER: 2 YEAR built: 1995 Notes: 69.85 mm spindle bore diameter. -Ø 80 mm rullabile min 4 max. Accessories: Charger-Inverter to change speed, spindle speed

Thread Rolling Machines MAGNAGHI 807


TYPE: Hydraulic T: 32 ROLLERS NUMBER: 2 RACK LENGTH: 200 mm Capacity: Ø 80 x 8 mm. Power: 15 Hp. Weight: 2800 Kg. Dimensions: 1650 x 1600 x 1500 mm. YEAR built: 1980 Notes: 69.85 mm spindles.

Veneer joining machines KUPER FW /J 900


Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 90 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Thread Rolling Machines MICHIGAN ROTO-FLO 3237


Type: Rolling rack ROLLERS NUMBER: 2 LENGTH: 915 mm RACKS. Capacity: Ø 50 mm. Power: 20 Hp Weight: 10500 Kg. Dimensions: 3000 x 3000 x 2200 mm. YEAR built: 1995 Notes: Total stroke 1066.80 mm. -Can mount 330 mm 610 + racks simultaneously. Access ...

Thread Rolling Machines IZPE RCS 120 H


TYPE: Hydraulic T: 20 ROLLERS NUMBER: 2 RACK LENGTH: 120 mm. Capacity: Ø 80 mm. Power: 10 Hp. Weight: 1700 Kg. Dimensions: 2000 x 1100 x 1400 mm. NOTE: spindle diameter 54 mm

Centre Drilling Machines Famas F-90


Multiple boring Machine F F 90 and 200 Famas Drilling distance max 1000 mm Solid drilling max 140 mm Counterbore max 200 mm Max 200 mm thread Sliding sleeve 90 mm Spindle stroke 1000 mm Morse taper of 5 Spindle motor power kW 1.1 N° 3 150/600/100 ...

Automatic Drillers Trapano Rapid 50


Drill-Rapid 50 Drilling distance max 1250 mm Solid drilling max 50 mm Max 25 mm billet thread Sliding sleeve 72 mm Spindle stroke 300 mm Morse taper 4 Speed 40 – 1250 RPM Spindle motor power kW 3 Year of manufacture 1985 For sale exclusively on  ...

Trapano radiale Invema DC13 65x1600 CN Sinumerik 805


Radial drill Invema DC13 65x1600 CN Sinumerik 805 Technical data: Drilling distance max 1600 mm Solid drilling max 65 mm Full thread max 50 M Sliding sleeve 80 mm 260 mm spindle travel Morse taper of 5 Speed 25 – 2000 RPM Spindle motor power kW 5 ...

Lathe WAGNER DCE 230


Working length: 750-2000mm, turning length: 700-1900mm, centre height: 230mm, centre distance: 750-2000mm, swing over bed: 460mm max., swing over sledge: 260mm max., spindle bore: 78mm, rotational speed: 14-1600/min, feed rate: 0.03-0.565mm, thread pitch: ...

Nedschroef BS 2


Machine type: boltmaker 4 die 4 blow Info: with segment thread roller Make: NEDSCHROEF Type: BS2 Constr. year: 1975 Diameter range: 4-8 mm Number of dies: 4 Number of stations: 7 Cutting length: 18-62mm Shaft length under head:  ...

Thread splicer for veneer - CE Standard KUPER FW 1150


Code: 0209 Brand: KUPER Model: FW 1150 - CE Standard Thread splicer for veneer - CE Standard Arm mm 1150 Veneer thickness from 0,3 to 3 mm Continuous feed 10/30 mt/min Total power supply 1,5 Kw Overall dimensions : mm 2130 x 750 x 1600  ...

bolt screw rolling machine Dongil(Korea) 120ton


120TON THREAD ROLLING MACHINE(BOLT SCREW MACHINE) Make:Dongil(Korea) Hompage:abc://abc.dongil-mc.co.kr Manufacturing year:2012 Rolling Force capacity:120ton Model:DIL-120 The number of dices:2 Product Max. diameter: 200mm Product Max. le ...

Thread Rolling Machines DONGIL(KOREA) 120ton


120TON THREAD ROLLING MACHINE(BOLT SCREW MACHINE) Make:Dongil(Korea) Hompage:abc://abc.dongil-mc.co.kr Manufacturing year:2012 Rolling Force capacity:120ton Model:DIL-120 The number of dices:2 Product Max. diameter: 200mm Product Max. le ...

Double Locked Stitch-Machine UNION SPECIAL 51300 KA, KD, KE


Three phase current: 380/ 220V, including automatic thread trimmer, magnetic drive, thread tension release, synchronizer, quick-ttop and switch box.

Thread splicer for veneer KUPER 630


Code: 0190 Brand: KUPER Model: 630 Thread splicer for veneer Base with wheels Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 m/min Volt 220 Overall dimensions : mm 1000 x 400 x 1200 h Weight kg 110

Thread Milling Machines Stanko USSR 5350A


Machine in working condition. Max. working length 1000mm max. working dia. 500mm.

portable radial drill MAS VRM50A


The largest diameter bore "full coverage" in the steel strength of 588 MPa, 50 mm The biggest thread in steel strength 588 MPa M48 Distance from spindle pole jacket from 1170 to 2070 mm Radius of pitch circle of holes drilled from 1370 to 2270 mm Dist ...

Wire EDM FANUC Alpha 1iB


Year 2003 Machine just overhauled axis travel x 550 mm y-axis stroke 370 mm u-axis stroke 120 mm v-axis stroke 120 mm z-axis stroke 310 mm automatic Threading CNC Fanuc

High Precision Turning Machines (Lathes) SCHAUBLIN 125


Toolroom precision lathe SCHAUBLIN 125 (B) with accessories. Characteristics: -Spindle speed from 45 to 3000 RPM, mechanical variator, -Automatic axial and longitudinal feeding (single lever operation), -Threading possibilities: metric, Whitwo ...

Hollow Spindle Turning Machines (Lathes) SAST 1A983


Manufactured by Sasta (Russia) Year of manufacture 1991 Spindle hole diameter, mm 310 Max. pipe threading diameter, mm 299 Min. pipe threading diameter, mm 73 Max. work piece diameter, mm 800 Max. work piece diameter above support, mm 450 Distance  ...
Find used machinery dealers in your country