We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55
used
CONTINUOUS DYEING RANGE TYPE OF TAPES LIGHT ELASTIC AND RIGID TAPES DESCRIPTION MACHINES ON REQUEST
used
CONTINUOUS DYEING RANGE, MAGHEBA ROLLER WIDTH 625MM HEATING SYSTEM GAS LAYOUT IN LINE 2 ROLL FINISHING PADDER 625MM DRYING CYLINDER 800X1250MM LAIT OUT FOR GAS HEATING DANCER DEVICES BETWEEN THE CYLINDERS TAKE-OFF DEVICE WITH 3 STATION, 1250MMWIDE SEPARATE CONTROL DESK + PLUG CONNECTIONS
used
NRP 90 GARMENT DYEING COMPUTER 30-60-90 KG FULL COLOUR KITCHEN EVR 120 ESSICATOR NEW STEAM COIL REWIND COMPLETED PLANT YEAR 2018 PERFECT
used
CONTINUOUS RIBBONS THERMOPRINTING PERFECT ELECTRIC PLANT NEW
used
6 PCs. available
used
Mounted on a plastic processing machine under the funnel, the master coloring mixture flows from the tank to the hopper by turning a screw into the hopper. The amount of colorant can be adjusted by control. ready to work
used
Complete material loader and colouring machine with control
Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...
1 piece plasma nitriding system Manufacturer: 1 piece used plasma nitriding system (tandem system) Dimensions: Diameter 1500 mm x 1000/2000/3000 mm (depending on whether 1/2/3 segment attachments be used) El. Connection value: 280 kVA It also includes an N2H2 fumigation device as well as an ammonia container. The plant was renewed in 2005. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded ...
Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...
used
3 roles standing mixer with control panel and mixer Manufacturer: King & Günther GmbH Type: Rexoplast Serial No.: 6306075 Year of construction: 1973 Mixer is equipped with Munkadur coating inside! In good condition!
Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep
used
On 4 castors-standing stainless steel mixing tank with propeller agitator Material: V2A (1.4301) Container has a hinged lid and a spout at the bottom with a valve DN 25 drawn forward. In very good condition!
used
Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one
used
SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,
used
Niro atomizer Type: F 160 Feed rate: max 50 t / h Weight: 450 kg Country of origin: Denmark
new
We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information
used
For sale is an aseptic Tetra Pak TBA 19 250 ml Slim filling line in very good condition, completely overhauled. This system is complete and ready for sale in the next few months. Delivery: 1. Type: Aseptic filling line Manufacturer: Tetra Pak Model: TBA 19 Version: 20 V Format: 250 ml Slim Built: 2001 Capacity: 7,500 pph Engine hours: 21037 2. Type: Straw applicator Manufacturer: Tetra Pak Model: TSA 21 3rd Type: Easy Ride Manufacturer: Tetra Pak Model: TER 4. Type: Cardboard Packer Manufacturer: Tetra Pak Model: Tetra Cardboard Packer 70 5. Type: Conveyor belts New conveyor system
used
For sale is a used Tetra Pak A3 / Compact Flex filling line, which is in very good condition, with low operating hours. (Pending contract!) Tetra Pak Filling Machine Manufacturer: Tetra Pak Model: A3 / Compact Flex Volume: 330 Prism / 200 Slim Format: Prisma / Slim Engine hours: 8300 Built: 2013 Condition: in a very good used condition Cartoner Manufacturer: Tetra Pak Model: TCBP 32 Engine hours: 8000 Built: 2013 Conveyor belt control Manufacturer: Tetra Pak Model: TLC 30 Built: 2013 Straw applicator Manufacturer: Tetra Pak Model: TSA 30 Engine hours: 8000 Built: 2013
Used Tetra Pak TBA 19 200 ml Slim For sale is an aseptic Tetra Pak TBA 19 200 ml Slim filling line in very good condition, completely overhauled. This system is complete and ready for sale in the next few months. We are in the process of purchasing two more plants of the same format. Delivery: 1. Type: Aseptic filling line Manufacturer: Tetra Pak Model: TBA 19 Version: 20 V Format: 200 ml Slim Built: 2006 Capacity: 7,500 pph Engine hours: 8189 2. Type: Straw applicator Manufacturer: Tetra Pak Model: TSA 21 3rd Type: Easy Ride Manufacturer: Tetra Pak Model: TER 4. Type: Cardboard Packer Manufacturer: Tetra Pak Model: Tetra Cardboard Packer 70 5. Type: Conveyor belts New conveyor system
used
Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54 ...
used
Sell granulator for plastic strands of extrusion. 7,5 kW power. Sale, clearance there. If it works, I don't know, therefore the reasonable sale price.
used
New machine with 3 x 800 ltr. Tanks Heating system: with steam through heat exchanger The whole system is disigned to enalbe sterilzation and cleaning of filler without disassembly of parts or components Technical data: - Output pressure: 4 bar - Temperature of feed water: 15-20oC - Steam Pressure: 3 bar - Steam flow: 300 kg/h - Temperature of steam: 120-130C - Pressure of air: 6 bar - Installed electrical power: 4 kW
used
Loading / loading for boilers or similar in a very good used and functional condition. Custom order / manufacturer unknown. Completely made of stainless steel, rollable, including basket, basket size B/D/H 105/85/70 cm. Dimensions W/D/H 170/100/250 cm. Workshop tested, ready for use. More on request.