We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.
used
Built: 1991, inlet: 400 mm x 400 mm opening, overhauled, without drive.
used
Chassis with friction wheel drive for light crane system DEMAG / TEREX suitable for crane rails made of system profiles type KBK 2 and KBK II L Type: DRF 200-B14-1-43 Fabr. No: 45602019 Travel speed: approx. 40 m/min = 0.67 m/sec Motor power: 0.75 kW Mains connection: 400 volts, 50 Hz. - Drive motor DEMAG / TEREX, type ZBA 80 A2 B007 KBK 2 / KBK2L Carriage for hanging in the crane rail Roller diameter: 82 mm Track roller width: 21 mm Carriage width: 78 mm Space requirement L x W x H: 470 x 320 x 490 mm Weight: 34 kg good condition; used
used
FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996
used
Manufacturer PPM (Made in France) Year 1991 Engine CUMMINS-LT10-C250(216PS/2100RPM) 6 Cylinder Condition Very Good Dimensions 11200x6056x4610mm/62,700 Kgs Max.Height Stackerable 14m(5th stackable) Price 58000 EUR FCA Klaipeda,Lithuania
used
Mobile excavator TEREX / Atlas Type TW160 Y.O.M. 2010 approx. 6,300 hrs - Hydraulic adjusting boom - Quick-change system for shovel - Gripper piping - Rear-view camera - Clearing sign (unused) available. - With Rototilt (shovel can be rotated and tilted 360 degrees. Additional grippers e.g. for setting telephone poles or lanterns. (last picture) Video can be submitted on request. The clearing sign was dismantled because the excavator was used as a two-way excavator with a rail handle (without DB approval). Mechanically very little stressed excavators. The enclosed clearing shield must be adjusted to the recording. Visually and technically good condition. Bdxbjqofbb Tires bad (can be renewed on request at an extra cost)
new
with adjustable lower link catch hook and removable trailer coupling, hook CAT 3
used
ID2825 Terex-Pegson cone crusher year/Year of construction 2005 approx. 4600 hours/hours Crawler mobile cone crusher, crusher type AX868 1000 SR, with 2-deck secondary screen, oversize grain return, magnetic belt, hydr. cone adjustment Chain-mobile cone crusher, crusher type AX868 1000 SR, with 2-deck secondary screen, oversize recirculation, magnetic tape, hydr. Cone adjustment
used
JCB - Wheel Loader with Hydraulic - Quick Coupler Bucket with undercarriage knife 0.8 m³ + pallet fork, All-wheel drive, wide tyres Trelleborg 400 Agro Year of construction 2018, operating hours: approx. 380 Power: 37 kW (50 HP)
used
refurbished bucket for wheel loader CAT980G, Width 3,600 mm, capacity 5.1 m³, Cut new,
used
Wheel loader LIUGONG 856 H, year of construction 2021, Operating hours: 170 with hydraulic quick coupler and 3.2 cbm shovel -Price on request-
used
TECHNICAL SPECIFICATIONS Designation: Concrete ramp Version: mobile, 2-piece Weight: approx. 5 t per block Slope: 15° Transport dimensions per block (length/width/height): 4,470 x 1,200 x 1,000 mm SPECIFIC COMMENT - Mobile ramp system to increase the discharge height - Mudguards at the tips - Metal construction fixed to the blocks for securing
used
Cat 966H Ready to work but need new tires, used for gravel pit Engine mantained 18,000H
used
Wheel Loader Komatsu 103 KW Engine type S6D102E Tire 20,5-25 4 x Good Central lubrication system Hydraulic quick coupler Shovel knife as good as new Width 2.54 m Capacity 2,1 m³ Length 7.06 m Width 2.45 m Height 3.25 m
used
ID3142 Caterpillar 980M year/Year of construction 2017 approx. 12500 hours/hours 29.5 t Bucket with teeth, central lubrication Bucket with teeth, central lubrication
used
The wheel loader has a low mileage for its age and is started regularly to avoid standing problems. Included in the price is a fork, the folding recess would also be available as an option.
used
If you are interested, please feel free to write
used
Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg
used
Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg
used
for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg
used
was connected to Gildemeister GMC 20
used
YEAR: 1989 CNC: FANUC 0T TORNIBILE: 300 mm TURNBACK LENGTH: 300 mm MANDRINO: MANDRINO ATTACK: 6 ASA BARRA CAPACITY: 56 mm ROTATION SPEED: 3240 rpm POWER: 26 Kw AXIS C: 360 degrees I TORRETTA: PORTASSTATION STATIONS: 12 Nr. MOTORS: 6 Nr. MANDRINO: MANDRINO ATTACK: 6 ASA ROTATION SPEED: 3240 rpm. POWER: 26 Kw AXIS C: 360 degrees The TORRET: PORTASSTATION STATIONS: 12 Nr. RELATED: 6 nr