used TECNOLEGNO Ledge grinding machines

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

First machine, for longitudinal processing, TECNOLEGNO COMPACT 48/2, built in 1998 Working width min/max 90/300 mm. Single chain track Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe Second machine for crosswise processing, MANEA MST-70, built in 1991 Working width min/max 220 / 2500 mm. Infeed chain with dogs hopper feed Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor un ...

Automatic oscillating curve grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed continuously from 25 - 25 m/min Feed motor 0.55 KW Drive motor 7.5 kW Grinding belt 320 x 2000 mm

Part Number 6291 TECHNICAL DATA - max width of the workpiece 1350mm - max height of the workpiece 100mm 3 aggregates: 1) transverse aggregate with pneumatically pressed shoe 13/17kW 2) combo unit (2 rolls) with pneumatically pressed shoe 13/17kW 3) combo unit (2 rolls) with pneumatically pressed shoe 13/17kW in advance: - rubber pressure roller - sequential shoe - aggregate - rubber pressure roller - aggregate - rubber pressure roller - aggregate - slip rubber roller, pressure roller - cleaning brush 1,5kW bottom: - slip roller - 5 segment feed tape with vacuum pump - pump motor 7,5kW - feed speed adjustable by 4kW geared motor - feed speed 5-26m/min - oscillation of pneumatic tapes on photocells - blowing of feeding belts - all units equipped with a sanding belt cleaning system - lifting the electric table - lifting motor about 0,55kW - de ...

Grinding machine XXIII DH3 ready for use from site in actual condition

Profile grinding machine / strip grinding machine Manufacturer: DIMA Model: LPS /9 Year of construction: 1994 9 grinding units / disc grinding units

Abrasive belt width 200 mm Grinding width 190 mm Sanding belt length 1600 mm Maximum grinding thickness 120 mm Motor power 5.5 kW Grinding motor speed 2,870 rpm. Abrasive belt speed 1,300 m/min. Oscillating abrasive belt

SPECIFICATIONS: Aggregates: 04 1 fixed unit 3 more swivelling/oscillating units Max. machining thickness mm: 100 Grinding speed adjustable Installed capacity KW: 15.0 Conveyor belt width mm: 250 Pneumatic adjustment Upper pushers arranged on 2 rubberized rails Side bracket for wide workpieces

Description the grey cast iron machine frame convinces with stability and torsion alimness, precise guides and excellent workmanship all guideways are reliably supplied with lubricant by an automatic central lubrication the working area is protected by an easily accessible enclosure the high-performance coolant pump is combined with the suction unit and binds the resulting grinding dust and aerosol during processing Grinding spindle the grinding spindle is large in size, dynamically balanced, completely sealed and permanently lubricated Prestressed precision bearings enable maximum grinding performance and reliability for many production hours Programming the high-quality ball-circuit spindle and the powerful servo motor guarantee precision and repeatability of positioning in the Y-axis for set-up work and for the manual process of the grinding spindle, th ...

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Cylindrical Grinder Model: FM41G-1600CNL45 New in 1988 Control: FM4 CNC Maker: Fortuna (Germany) Ser. No. 15674 Maximum grinding diameter: 275mm Maximum grinding length: 1600mm Additional measurement device

Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.

CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ??? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Tablе stroke 500 mm Max grinding depth 250 mm Grinding diameter 500 mm max (with water protection 450 mm) To sand bore diameter 300 mm Swivel range of the workpiece headstock 25 max Grindable cone angle 50 Rotational speed of the workpiece spindle U / MIN 20-400 Table speed infinitely einstallbar m / min 0.1-8

General: Year of construction 2019 Spindle speed 1,450 rpm Travel speed table 5 – 25 m/min Largest grinding wheel 355 x 38 x 127 mm Distance spindle – table max. 500 mm Clamping surface 300 x 600 mm Automatic feed control AD5

General: Year of construction 2019 Spindle speed 1,450 rpm Clamping surface 300 x 600 mm Largest grinding wheel 355 x 38 x 127 mm Travel speed table 5 – 25 m/min Distance between spindle and table 500 mm Weight 1.700 kg Other equipment and accessories included: Automatic feed control AD5 Coolant device Hydraulic

WMW cylindrical grinding machine B0pedtl283 Type SA(U) 200x800 Grinding diameter approx. 220mm Grinding length approx. 800mm Infinitely variable speed regulation/headstock Coolant device Grinding wheel puller Work lamp Various grinding wheels and disc flanges Dimensions approx. LxWxH 3x1.5x1.7 meters Weight approx. 3000kg

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

CNC flat and profile grinding machine, horizontal grinding spindle LSCH-220 Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7.100 kg

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Grinding surface 600 mm x 250 mm Table surface 600 mm x 200 mm Distance between the table surface and the grinding spindle max. 550 mm Max. table load 200 kg Grinding spindle speed at 50 Hz 2,800 rpm Drive power of the grinding wheel 2.2 kW

- Grinding width: 200 mm - Magnetic table: 500 x 200 mm - Dressing device: yes - Coolant device: yes - Automatic infeed: no - Machine weight: 1850 kg - Dimensions (W x D x H): 1.8 x 1.5 x 2.2 m m - Condition: good, immediately ready for use Accessories without documentation, machine feet