british flag
Resale Logo

Table used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information retrofitting of used machines german makes  Udo Krichbaum TRANSITUS, S.L.  http://www.transitus.net 
banner logo
start page > keywords Table > results
maximum number of results exceeded > 1000
please refine your search
15071 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
112998577 307

CEVENINI TW 300 Log Slitting Machine for sale
Log Slitting Machine


Cevenini Log Slitting Machine Make: Cevenini Model TW300 Suitable to take jumbo rolls 1.6m wide With sound booth Up to 1500rpm With rewind tension Roller up down With Air knife Can take material from large  ...

 
Cevenini Log Slitting Machine . Make: Cevenini. Model TW300. Suitable to take jumbo rolls 1.6m wide. With sound booth. Up to 1500rpm. With rewind tension. Roller up down. With Air knife. Can take material from large rolls into small rolls. Operating hours ; 39671
 
Price  
  UK   request
112998576 708

MTA Taurus TAN 094 N for sale


93.7 kW, MTA chiller air-cooled, type: Taurus TAN 094 M.T.A. S.p.a.. Taurus TAN 094N are compact water chillerss, which are suitable for outdoor installation up to-20 °C inclusive with hydronic Kit (tank + pump) for ...
used machine
 
93.7 kW, MTA chiller air-cooled, type: Taurus TAN 094 M.T.A. S.p.a... . Taurus TAN 094N are compact water chillerss, which are suitable for outdoor installation up to-20 °C inclusive with hydronic Kit (tank + pump) for low outdoor temperature. with electronic Fan speed control.. . Cooling capacity kW 93.7. Water temp. Exit entry: 7 12 °C. Flow rate m³h 24.3. Ambient temperature °C 35. Refrigerant R 407C.. . Electrical data:. Voltage V 400, frequency Hz 50, stages of pH 3. Maximum power consumption (kW) 44. Max current (A) 76. Starting current circle (A) 199. Protection class: IP54. . Dimensions:. Length mm 2477, width mm 1110, height 2120 mm. Weight kg 1047. Connection RP 2 12 ". . Serial No.: 2200080824. Built in 2006, condition: Optical 3, technically 2-3. . Used machines can have Visual defects due to their use.. (Subject to change and prior sale reserved!). Location: MTA Deutschland GmbH, 41334 Nettetal. Price: On request (excl. VAT from Nettetal), 0 months warranty. . Chillers, heat pumps, chiller, MTA.
2006
Price  
  DE   request
112998562 105

KALTENBACH SKL 450 for sale
Fully Automatic Circular Saws


Fully automatic aluminium circular saw for non-ferrous metals up to D160 mm ADVANTAGES AT A GLANCE Standard saw blade Ã? 450 mm Miter adjustment +-90 degrees Optimal chip flow through the Kaltenbach principle ...

 
Fully automatic aluminium circular saw for non-ferrous metals up to D160 mm. ADVANTAGES AT A GLANCE. Standard saw blade Ã? 450 mm. Miter adjustment +-90 degrees. Optimal chip flow through the Kaltenbach principle "cut down". high cutting quality thanks to workpiece clamping on both sides of the saw blade. infinitely adjustable saw blade feed. short cuts and cycle times by electronic cutting height adjustment and rapid return of the saw blade. minimum residual lengths by special Greifausfuerhung. simple operation and programming of NC control. Space-saving installation. . Technical data:. Length [mm]: 11350. Width [mm]: 3000. Height [mm]: 1900. Weight [kg]: 1480 without accessories. Power supply: 380V 4.7 KW. Feed automatically: easy lift 10-1000 mm double stroke 10 â 2000 mm. Saw blade diameter: 400450. Cutting area: D160 mm square 145 mm. Extraction. Accessories: owner's manual, wiring diagrams. . Machine data:. Cutting area. Round material 90 ° 130 165 mm. Square material 90° 125 145 mm. U-profile lying 90° 300 x 40 320 x 50 mm. U-profile lying 45° 220 x 60 250 x 40 mm. U-profile standing 45° 60 x 130 100 x 150 mm. Cutting speed HM - saw blades 1950 3900 m min. Continuous saw blade feed
 
25,000 €  
  DE   request
112998554 106  

RICHTER 100 for sale
Eccentric press judge


Eccentric press judge Engine No. 320188 Technical data: To power 100. Table size Lxw 1000x700mm Diarrhea hole 135 mm Stözelplatte LxB 790 x 540 Stözelverstellung 90mm T-slots 4 T -  ...

 
Eccentric press judge. Engine No. 320188. . Technical data:. . To power 100.. Table size Lxw 1000x700mm. Diarrhea hole 135 mm. Stözelplatte LxB 790 x 540. Stözelverstellung 90mm. T-slots 4. T - slot size 4024. Stroke 200. Height 420 mm. Air clutch. 2 manual. Foot pedal. .
 
Price  
  DE   request
112986115 204

JOHANNSEN T85 for sale
Long belt sander


Table size: 2,800 mm x 950 mm, motor: 5.1 kW.

 
Table size: 2,800 mm x 950 mm, motor: 5.1 kW.
 
2,900 €  
  DE   request
112982791 704

URSCHEL G for sale
Slicer machine


Condition: In good conditions Series number: 910 & 911 Characteristics: Dicer Slicer machine, maximum infeed product up to 140 mm in any dimension. Suitable for fruits and vegetables Continuous operation  ...
used machine
 
Condition: In good conditions. . Series number: 910 & 911. . Characteristics:. . Dicer Slicer machine, maximum infeed product up to 140 mm in any dimension.. . Suitable for fruits and vegetables. . Continuous operation for uninterrupted production.. .
 
Price  
  ES   request
112976357 1014

HÜNNEBECK RASRO for sale
RASTO Formwork


back to result list previous offer next offer Formwork system Hünnebeck HÃ?NNEBECK RASTO Formwork system - Hünnebeck RASTO Formwork system - Hünnebeck RASTO  ...
used machine
 
. back to result list. previous offer next offer. Formwork system. Hünnebeck HÃ?NNEBECK RASTO. . Formwork system - Hünnebeck RASTO. . Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. Formwork system - Hünnebeck RASTO. . Back. Before. . Buy. . Price on request. . . Contact provider. MachineryPark ID XHTO-4480-JC. Manufacturer Hünnebeck. Model RASTO. Year of manufacture 2010. Condition used. Site 77694 KehlNeumühl. Germany. . 435 m ²sqm HÃ?NNEBECK RASTO:. . -4 pcs. Rasto Panel 240 x 300 cm. -102 pcs. Rasto Panel 90 x 300 cm. -6 pcs. Rasto Panel 75 x 300 cm. -8 pcs. Rasto Panel VZ 70 x 300 cm. -5 pcs. Rasto Panel 65 x 300 cm. -6 pcs. Rasto Panel 60 x 300 cm. -8 pcs. Rasto Panel 55 x 300 cm. -10 pcs. Rasto Panel 50 x 300 cm. -6 pcs. Rasto Panel 45 x 300 cm. -4 pcs. Rasto Panel 40 x 300 cm. -5 pcs. Rasto Panel 30 x 300 cm. -2 pcs. Rasto Panel 25 x 300 cm. -6 pcs. Rasto inside corner 30x30x300cm. -3 pcs. Rasto variable corner 15x15x300cm. -3.pcs. Rasto variable corner 30x30x300cm. -6 pcs. corner adjustment 5 300cm. -11 pcs. Rasto 90 x 150 cm.. . 5 boxes full with different clamps (normal, variable + corner clamps), tie rods, plate nuts,.. 5 boxes with much clamps, normal, adjustable, corner brackets . 20 pcs. Walking platforms and 4 crane hooks.. 20 running consoles, 4 crane hooks should be more than enough for the forms.. But once all is at my stock, will be counted . NET from our CommonsNET ex works 77694 Kehl Auenheim Germany: 54.375,00 EUR. (125,-EUR sqm.). (List price list price approx. 145.000,-EUR).. . Inspection possible at our warehouse in Kehl Auenheim. Visit possible for us on the camp in Kehl.Auenheim..
2012
Price  
  DE   request
112974710 403

SIAT XL33-P Tipo C for sale
Bottle labelling machines


Speed: 600 boxes hour Characteristics: Automatic case sealing machine SIAT model XL33-P, Type C, with side drive belts and manual box-size adjustment. Production: 600 boxeshour aprox. Maximum box size: - Length ...
used machine
 
Speed: 600 boxes hour. Characteristics:. Automatic case sealing machine SIAT model XL33-P, Type C, with side drive belts and manual box-size adjustment.. Production: 600 boxeshour aprox.. . Maximum box size:. - Length: 600 mm. - Height: 500 mm. - Width: 500 mm. . Adhesive tape wide 5075 mm. Belt speed: 22mmin. . Machine overall dimensions:. -Length:1915 mm. -Width: 905 mm. -Height: Min.1360 mm - Max.2010 mm. Weight kg: 198 Kg. . The machine is composed of:. -Frame. -Adjustable legs. -Columns. -Taping units. -Top head. -Side drive belts. -Electric motors. -Emergency stop button. -Main switch ONOFF. -Air pressure regulator. . Complete documentation available.
 
Price  
  ES   request
112754854 1101

WAUKESHA 36GLD for sale
Gas generators


700 KVA With penal, gas line and table radiator.
used machine
 
700 KVA. With penal, gas line and table radiator..
1998
Price  
  NL   request
112754853 702

Nougat Schneider


Nougat Schneider Make and year of manufacture unknown. By means of a mechanical horizontal baler with spindle drive nougat blocks are pressed against a wire device, so the nougat block will slowly cut into slices (simi ...
used machine
 
Nougat Schneider. Make and year of manufacture unknown.. By means of a mechanical horizontal baler with spindle drive nougat blocks are pressed against a wire device, so the nougat block will slowly cut into slices (similar to the principle Eierschneider). . Sequence:. -Inserting nougat block. -Control of the press with two-hand tripping. -Removal of the nougat discs. The shut-off is in the front and rear dead centre by means of roller lever switches.. For nougat blocks up to 150 150 400 mm.. The press is suitable also for other soft materials to split. .
 
Price  
  DE   request
112598005 101

WEBO BR 32 R for sale
Radial Drilling Machines


Gr. Bohrlstg. in St.: approx. 35 mm Stroke: 350 mm Speed range: 33-1500 rpm Feeds: 0.06 0.09 0.12 0.16 0.27 0.36 0.50 0.75 1.00 mm U Spindle retainer: MK 3 Projection: 1240 mm Total power consumptio ...
used machine
 
Gr. Bohrlstg. in St.: approx. 35 mm. Stroke: 350 mm. Speed range: 33-1500 rpm. Feeds: 0.06 0.09 0.12 0.16 0.27 0.36 0.50 0.75 1.00 mm U. Spindle retainer: MK 3. Projection: 1240 mm. Total power consumption: 2.6 KW 380 Volt. Machine weight: approx. 3000 kg. . Equipment Accessories:. . electrical clamp. motorized vertical adjustment. 9 automatic drill feeds. Quick-action drill Chuck. . Other:. . The machine is without cube table. . All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.. Each party has the opportunity to test the machine before making a purchase in our factory under power..
1965
1,800 €  
  DE   request
112597753 203

SCM F 410 Langloch for sale
Set off with milling


Abrichthobelmaschine with Tersamesser and rear Morticing Planing width of 410 mm Max depth of cut 20 mm Reinforced drive motor 4kW with automatic motor brake 4-drum Tersa with new blades slit table lips Swivel st ...
used machine
 
Abrichthobelmaschine with Tersamesser and rear Morticing. . Planing width of 410 mm. Max depth of cut 20 mm. Reinforced drive motor 4kW with automatic motor brake. 4-drum Tersa with new blades. slit table lips. Swivel stop with folding help stop AB. Member erschwingen protection. Dust nozzle 120 mm. with attached Langlochbohreinheit. 5 used mortising. Operating instructions. . Dimensions approx. 2600 x 1300 x 1100 mm (Lxwxh) with slot boring machine. Weight approx. 900kg.. . Please the PDF file with our terms and conditions and order form.. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
1992
4,500 €  
  DE   request
112597747 207

HEBROCK TOP 2000 Plus mit Ziehklinge for sale
Edge gluing machines


Small edge banding machine by lifting skirt, only 3 m long! Edge thickness up to 3 mm Workpiece thickness up to 45 mm Feed about 10m min Suction connection 100 mm Aggregates: Top pressure manually adjustable  ...
used machine
 
Small edge banding machine by lifting skirt, only 3 m long!. . Edge thickness up to 3 mm. Workpiece thickness up to 45 mm. Feed about 10m min. Suction connection 100 mm. . Aggregates:. Top pressure manually adjustable with Handwheel and display. Gluing unit with quick heating pool. Pressure zone. Compound miter saw. Combined milling unit, equipped with R2. Surface scraper. . Hood latch. Emergency stop switch. CE mark. Operating instructions. . The machine is equipped with fresh reversible knives and sharpened saw, is directly ready for use. The engine comes from a small operation, only 153 hours so almost as good as new. . Machine dimensions approx. 2950 x 1360 x 1250mm (Lxwxh)(inkl. Teller). Weight 600kg.. . Please the PDF file with our terms and conditions and order form.. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
2008
7,900 €  
  DE   request
112597743 109

MATRA / FANUC TAPE CUT - W 2 for sale
Wire Cutting Spark Erosion Machine Tools


Table travel: 500 x 350 mm Max work piece sizes: 450 x 650 x 300 mm maximum workpiece weight: 350 kg Total power consumption: 11 KVA 380 Volt Machine weight: 800 kg Equipment Accessories: CNC 5 axis CNC Fan ...
used machine
 
Table travel: 500 x 350 mm. Max work piece sizes: 450 x 650 x 300 mm. maximum workpiece weight: 350 kg. Total power consumption: 11 KVA 380 Volt. Machine weight: 800 kg. . Equipment Accessories:. . CNC 5 axis CNC Fanuc A-04 B - 0224 - B 210. -4 axes simultaneous-. Transistor pulse generator. Programming station. . All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.. Each party has the opportunity to test the machine before making a purchase in our factory under power..
1989
Price  
  DE   request
112597729 106

NEFF 2 T 12 T for sale
Hydraulic Open Gap Bench Presses


Capacity 4t, table 300 x 250 mm, Gesamthohe - cca 175 cm, Btto 250 kg more info on request
used machine
 
Capacity 4t, table 300 x 250 mm, Gesamthohe - cca 175 cm, Btto 250 kg. more info on request
1956
600 €  
  SK   request
112597721 401

SIDEL work with HDEP for sale
Bottle filling plants


SIDEL Line and can work with HDEP Manufacture Year : 2003 ASEPTIC Filling screwing machine. Nominal Production Rata : 30 000 bottles hour (1 L bottles) 36 000 bottles hour (0.385 ml bottles) you can fill 250,  ...
used machine
 
SIDEL Line and can work with HDEP. Manufacture Year : 2003. ASEPTIC Filling screwing machine.. Nominal Production Rata : 30 000 bottles hour (1 L bottles). 36 000 bottles hour (0.385 ml bottles) you can fill 250, 500-1000 and 1500 ml when you keep the same neck bottle format. Number of filling stations 70 . Number of closing stations 20 . Type of closing C (Caps). Bottle Decontamination - Rinsing Unit .. Filling and Closing Unit.. Caps Decontamination Unit. Printer. Logiface. APASterile water platform. Principle of operation : . The machine is intended for the decontamination of capsules and bottles, the filling of the bottles and the aseptic heat sealing of the bottles.. Its principle of operation is as follows:. - preparation of sterilization fluids and sterile water,. - decontamination of the bottles with a sterilizer (APA),. - sterile water rinsing of the bottles,. - bottle filling by a flow-controlled, aseptic process,. - capsule distribution,. - decontamination of the capsules with a sterilizer,. - sterile water rinsing of the capsules,. - capping the capsules onto the bottles,. - transfer of filled and capped bottles into the non sterile zone,. - placement of bottles on a conveyor,. - Bottles rinsing. - printing of packaging data or error codes on the bottle,. - routing of off-specification bottles or bottles with an error code to a sampling table. . .
2003
Price  
  TR   request
112266209 406

CRYOVAC Typ 8310 for sale
Cryovac vacuum packagiung machine


F 104 1 half automatic working Cryovac round table packaging machine existing about Pos. 1 1 Cryovac round table packaging machine Modell 8310-14V Series No. G 1959 manufacturer year: with 5 vacuum ...
used machine
 
. F 104 . 1 half automatic working Cryovac round table packaging machine. existing about. . Pos. 1 . 1 Cryovac round table packaging machine. Modell 8310-14V. Series No. G 1959. manufacturer year: . with 5 vacuum chambers. for packaging size from 700 g to 2 kg. storage place: 1,70 m x 2,30 m. with suction of plastic foil parts in a round . storage tank. with 1 vacuum producing Busch pump . with 1 plastic chain links conveyor, . length 80 cm with motor drive. . Pos. 2. 1 belt conveyor to transport the closed . packaging to the shrinking tunnel. . Pos. 3. 1 Cryovac shrinking tunnel. Manufacturer is Cryovac. Type STBW 6090. Mach. No. 72CJ 1442. with 35 kW for hot water production. with one steam exhauster with a . rown plastic pipe. to the roof. Measurements:. length 88 cm, breadth 1,20 m, . igh is 1,10 m. . Pos. 4. 1 conveyor to connect Pos. 3 with Pos. 5. length 43 cm. . Pos. 5. 1 Cryovac drying and cooling machine. to dry the humidity from the plastic bags. and to cool down the content of the plastic bags. Manufacturer is Multivac Sepp Hagenmüller. Mach. No. 103969. Type TE 100. Measurements:. length 1,00 m, breath 95 cm, high 1,10 m. with 1 roller conveyor in the output of the dryer plant. . Price up standing point: 9.000,00 Euro. . .
1997
9,000 €  
  DE   request
112265749 207

HHS HMP 06-1x2 M for sale
Hotmelt applicator systems


Hot glue, glue melter HHS, type HMP 06-1x2 M machines no. 470203118158 Melting tank coated aluminium, Tank contents 6 kg Melting capacity 7 kg h Hot melt glue pellets, or block hose connections of max 2 pieces temp ...

 
Hot glue, glue melter HHS, type HMP 06-1x2 M machines no. 470203118158. Melting tank coated aluminium,. Tank contents 6 kg. Melting capacity 7 kg h. Hot melt glue pellets, or block hose connections of max 2 pieces temperature control 5-channel control. Maximum setting temperature 200 ° C. Supply pressure min. 6 bar bypass, adjustable maximum 80 kW bar connection value 4 weight approx. 30 kg site 32683 Barntrup (errors and omissions in the technical data as well as subject to prior sale).
 
Price  
  DE   request
112265743 709

DANONE Kultur Injektionsraum for sale
sterile culture working room


H 102 1 culture dosing room, covered with sterile air, dismantling is possible a.) 1 sterile air production plant, installed in a stainless steel cabinet int. No. PAL 4.6 is installed in a stable wall c ...
used machine
 
. H 102 . 1 culture dosing room, covered with sterile air, . dismantling is possible. a.) 1 sterile air production plant, installed in a stainless steel cabinet. int. No. PAL 4.6. is installed in a stable wall construction. b.) . Sterile culture working place. enclosing with small walls and with a Laminarflow roof . The milk, which is prepared for the soft cheese ripening in tanks. is flow through a milk pipe directly through the sterile culture . vaccinate room.. Here was vaccinate by hand the culture and rennet in the . skim milk what is flow through the pipe into the ripening tank. The frozen culture was delivered in a sterile plastic bag and . this bag was installed on the culture emptying pipe end.. To fill the great ripening tank with milk needs 3 hour, enough time . to dose the culture and rennet in the pipe in the sterile room.. The room existing about removable walls an d 1 door.. Size: 2,5 m x 1,8 m; high 2,80 m. . Price up standing point: 2.300,00 Euro.
2002
2,300 €  
  DE   request
112265737 208

SUPERFICI ELMAG for sale
Painting plants


Painting plant, paint rolling machine with UV of dryer SUPERFICI ELMAG, BJ.: 2001 coater SUPERFICI type NOVA PFN A01 machine no. 3774 S working width 1300 mm Working thickness of 100 mm max Transport belt speed 5 m  ...
used machine
 
Painting plant, paint rolling machine with UV of dryer SUPERFICI ELMAG, BJ.: 2001 coater SUPERFICI type NOVA PFN A01 machine no. 3774 S working width 1300 mm. Working thickness of 100 mm max. Transport belt speed 5 m min transport of 0.75 kW chrome metering role of á´? 165 mm 0.75 kW rubberized job role of á´? 242 mm 0.75 kW. Hardness 50 shore the rubber roller height adjustment 0.37 kW. Squeegee, swinging 0.18 kW feeding pump 0,75 kW. Total power 5 kW control control panel touch dimensions Lxwxh 1100x2700x1600mm weight approx. 1200 kg UV dryer type SUPERFICI TU 66 25 + 1UV. Machine no. 5347. Working width 1300 mm spot number 2. UV emitters from the top emitter power 80 W cm. Suitable for mercury and gallium tubes Stangentransport 2500 mm total capacity of 26 kW. Dimensions Lxwxh 2550 x 2350 x 1300 mm weight 1000 kg free-standing control cabinet approx. 1200 x 600 x 2000 mm, 800 kg incl. conveyor belt HOMAG 2300 x 1500 mm. Conveyor belt VENJAKOB 2800 x 1500 mm site 32683 Barntrup (errors and omissions in the technical data as well as subject to prior sale). .
2001
Price  
  DE   request
112265732 202

WEINIG UNIVAR 1 Typ UFA 030 for sale
Profile milling machines


Profiling and to milling machine Weinig Univar 1, type: UFA 030, BJ 1986 Profiles running around to milling of Windows, doors with unequal Machine no. 030-372 Workpiece thickness of min. 30 mm 78 mm (without hub 12 ...

 
Profiling and to milling machine Weinig Univar 1, type: UFA 030, BJ 1986. Profiles running around to milling of Windows, doors with unequal. . Machine no. 030-372. Workpiece thickness of min. 30 mm. 78 mm (without hub 120 mm). Workpiece width of min. 30 mm workpiece length of min. 330 mm. Feed motor 0.75 of kW, feed speed 4.5-23 m min stepless adjustable brake. 1 spindles spindle of vertical right 11 kW, 6000 RPM. with constant velocity automatic out free crack to milling without counter profile. Spindelabremsung for equal and opposite. 2. spindle of vertical right 11 kW, 6000 RPM. Right vertical spindle for two tools spindle stroke vertical per 100 mm. Basic position under the table 6-16.5 mm. Spindle Ã? 50 mm maximum clamping height 285 mm. Tool air District 112-250 mm. Horizontal spindle stroke 100 mm against the parties stop, fine adjustment bar. separate for upper and lower tool position. Hydraulic adjustment in a u-shaped row against fixed stops. Central lubrication management stops before and after the spindles hydraulic 1-3 mm adjustable. Operating voltage 380 V 50 Hz. Control automatic workflow. freely programmable memory control with 60 programs. Each program contains up to 6 different edits per element. As a result, up to 360 different operations have to save.. . Special design milling unit 2.2 kW, 6000 RPM;. Spindle Ã? 40 mm, clamping height 90 mm;. Tool air district 140-180 mm;. Hydraulic horizontal movement programmatically.. Machine dimensions Lxwxh approx. 4500 x 2300 x 1600 mm. Weight 3500 kg. . (Errors and omissions in the technical data, as well as subject to prior sale).
 
1,000 €  
  DE   request
112265725 207

OTT PROFIMATIC M 259 FÜ for sale
Edge gluing machines


Machine no. P53059 Working methods for the processing of PUR adhesive and EVA glue edges material PVC, solid wood To glue er thickness 0,2-20 mm Workpiece dimensions Width min 60; Length min. 150 mm Height min. 10 ...

 
Machine no. P53059. Working methods for the processing of PUR adhesive and EVA glue edges material PVC, solid wood. To glue er thickness 0,2-20 mm. Workpiece dimensions. Width min 60; Length min. 150 mm. Height min. 10 mm, 60 mm quick heating pool melt-Matic. with automaticher DC and counter running control of the glue roller. . Pressure zone 1 x pressure roller, 6 x rollers. Feed 8-24 m min, stepless. Route control. Heated infeed fence spray. Release agent is applied before the trimming unit up and down on the work piece. The adhesive can no longer adhere to these surfaces facilitating the work piece cleaning. Detergent is sprayed Schwabbelaggre-gat up and down before on the workpiece around the edges of. Anti-static coolant is sprayed after gluing of edge tape directly on the joint and on the edge tape. . Equipment: Fügebearbeitungsaggregat. 2 motors in the equal and opposite working, automatically controlled. Automatic edge magazine. for the Automatic Strip edge feeder. Automatic reel magazine caps scissors for edges of the role. . Doppelkappaggregat K-17 front and rear 2 x 0,6 kW, Tiltable 0-20 °. Bündigfreäsaggregat updown 2 x 1,9 kW; 1200015000Upm 200250 Hz. Chamfer milling unit updown with auto chamfer thickness adjustment. 2 x 0, 75 kW; 250 Hz, Tiltable 0-45 °. . RADIUS milling unit topbottom 2 x 0, 4 kW; 13800 rpm, spindle tilt 25°. Nutagreggat 3.5 kW; 8800 rpm, 150 Hz, swiveling 90°. Corner rounding unit AR 4. Top front and rear bottom front and rear 4 x 0, 35 kW; 10900 rpm, 200 Hz. Profile scraping unit for removing the rounded Kunstoffkanten, zweiseting non-detenting, auto heading to. Flat scraping with fine button device for the Restschmelzklebr rentfernung in the joint area. Edge cleaning unit KE-PURbottom 2 x 0,8 kW; 1450 RPM. . Including external melting unit multi-melt - tank location with level sensor in the CombiMelt type CMTA year: 2006. . Max. Temperature heating hopperhose 230 ° C. Time monitoring 15 min. Tank content 2 kg. Minmax amount of subsequent pumps in manual mode 50500 grams. Max.Nachpumpemenge of the secondary pump automatic 200 grams. Minmax glue temperature input 140160 ° C.. Motor 3 kW. Supply channel with tube. to feed a PUR adhesive external tank system. . Total connected load 26 kW. Machine length 11200 mm. Machine width 960 mm. Machine height 1420 mm. Weight 5500 kg. Site D-32683 Barntrup. . Changes and errors in the technical data, as well as subject to prior sale). .
 
Price  
  DE   request
112265723 209

BRANDT OPTIMAT KD 68 CF for sale
Edge bander


Machine number 0-261-06-0335 Edge thickness 0.4-8 mm Rollentrenn 3 x 45 mm Workpiece thickness 8-40 mm Workpiece width of min. 65 mm Workpiece length of min. 160 mm Feed up to 11 m min Aggregate Assembly automat ...
used machine
 
Machine number 0-261-06-0335. Edge thickness 0.4-8 mm. Rollentrenn 3 x 45 mm. Workpiece thickness 8-40 mm. Workpiece width of min. 65 mm. Workpiece length of min. 160 mm. Feed up to 11 m min. Aggregate Assembly automatic edge magazine rolling plates 800 mm diameter.. Adjustable infeed fence. Trimming unit 2 x 2.2 kW; 200 Hz. Quickmelt-gluing unit caps unit chamferstraight 2 x 0.27 kW; 200 Hz; 12 000 rpm, 0-15 ° Swivel range. Flush trimming unit with keying 2 x 0.40 kW; 200 Hz, 12 000 rpm, 0-15 ° Swivel range. Contour trimming unit 2 x 0,35 kW; 200 HZ, 12 000 rpm. Scraper unit with pneumatic package the Kapp to the electro pneumatic axial process, - Bündigfräs-, form milling cutter and Ziehkligenaggregate. Weight 2200 kg. Total length 5740 mm. Site D-32683 Barntrup. . (Errors and omissions in the technical data as well as subject to prior sale).
2002
Price  
  DE   request
112265711 202

HOMAG BAZ 32/G for sale


CNC milling - edges in glue - post processing and drilling Centre HOMAG type: BAZ 32G with gluing unit for the production of furniture parts, solid wood or similar materials machines no. 0-201-22-2134 Working area x-3 ...
used machine
 
CNC milling - edges in glue - post processing and drilling Centre HOMAG type: BAZ 32G. with gluing unit for the production of furniture parts, solid wood or similar materials machines no. 0-201-22-2134. Working area x-3600 and Y-1200 mm, Z - 120 mm (stroke 340 mm). C axis as rent trailing axle to the x-, Y-axis travel speeds max. 80 mmin in X - and Y-direction. Max. 30 mmin in Z-direction. Technical data: workpiece length of 3600 mm for single occupancy. Max 1200 mm pendant occupancy. Workpiece width max. 1200 mm. Workpiece thickness edge max 40 mm. without edge max. 60 mm with stand type tensioner. without edge max. 120 mm with clamping template. at least 12 mm chamfer milling. RADIUS milling min. 2 x radius + 10 mm. Main spindle 12 kW liquid-cooled three-phase asynchronous motor. Tool holder HSK F63. Tool length of 200 mm. Tool Ã? max. 150 mm for cutters, max 200 mm for grinding tools. Tool weight of 6 kg incl. recording. Frequency converter 15 kW to the electronic speed control. Speed range, infinitely programmable from 1500-18000 RPM. Drill head 17 spindles 1 engine 1.9 kW, speed 75000 UPM. for vertical drilling, opening stroke 40 mm. ever. Spindle separately available 11 spindle in the X direction 7 spindles in the Y direction, spindle distance 32 mm. Plate Exchange magazine 12, HSK 63 tool and unit Assembly: 12 x Ã? Max 130 mm or 6 x Ã? Max 180 mm and 6 x Ã? 70 mm. Wechselaggregatte:. the automatic change in the main spindle. Cutting saw and end trimming unit and compound miter saw Ã? 180 mm on C-axis unlimited swivel for grooves and cuts from the top with any angle to the workpiece. Caps edge overhangs and cutting of workpieces, as well as rectangular notches. Blow-off nozzle workpiece using C-axis swiveling unlimited. Drillingmilling unit 4 spindles for horizontal drilling and light milling. . Edges changer for the processing of rolls. 3-roller plate with role disconnecting device for the automatic change of edge. Roll Ã? max. 800 mm, length of min. 350 mm. Rest edge lengths surveillance with feed stop at 1800 mm. . Separate Y-axis for rapid deployment of the gluing unit. 360° gluing unit for grade edges with direct glue specification and Manual single strip feed,.. pneumatic without melting, melting glue granule feeding by hand, 1 first press roll, 1 after pressing role edge height of 45 mm. Edge thickness plastic 0.4-3 mm,.. Veneer 0.4-2 mm. Edge length min. 230 mm. Clamping table smooth table with high-strength plywood panel. Connectors for 16 vacuum clamp or stencils. 15 vacuum clamp 120 x 120 mm, H 100 mm. 11 longitudinal retractable stops lifting 140 mm. 2 retractable page stops for shuttle machining. Machine zero point front, left. Grown laser positioning help at the main spindle.. 2 vacuum pump 66100 m³h. Safety equipment floor mat, Sicherheitsabschrankung control and software. Homatic CNC system NC 83 with PLC control HOMAG WOODWop 4.5. Freestanding control cabinet. Operating voltage 380400 Volt, 5060 Hz. Power 33 kW. Weight 7 500 kg. Dimensions (L x W xH) ca. 8700x5000x2900mm. . . (Errors and omissions in the technical data as well as subject to prior sale).
 
Price  
  DE   request
112265707 202

HOMAG BOF 11 VENTURE 10 L for sale
Milling and drilling systems CNC


Work piece work piece length parameter all aggregates 4,000 mm single; 1375 mm pendant Workpiece length milling WZ-through. 25 mm 4175 mm single; 1550 mm pendant Werkstückbreite_Alle aggregates 1450 mm a ...
used machine
 
Work piece work piece length parameter all aggregates 4,000 mm single; 1375 mm pendant. Workpiece length milling WZ-through. 25 mm 4175 mm single; 1550 mm pendant. Werkstückbreite_Alle aggregates 1450 mm attacks front; 1700 mm rear. Workpiece width milling WZ diameter. 25 mm 1525 mm attacks front; 1850 mm rear. Travel speeds vector speed 113 m min. X - and Y - axis 80 m min. Z axis 30 m min. Clamping table with consoles and tubeless vacuum Guide. Working height 950 mm bottom workpiece. Vacuum system vacuum pump 100 140 m³h. Main spindle 15 kW with interface for HSK F63, with key ring D 130,Drehzahl = Max 18888 1min.. Tool weight of Max 3 kg maximum milling tool by. Grinding tool diameter 120 mm; 200 mm, hybrid storage, with aggregate interface, C-axis Swivel range without limit. Interface for FLEX5 unit rear derailleur 30-fold for Werkezuge and aggregates with HSK F63, Werkzeugdurchm. Max 140 mm: grinding tools of 200 mm with double gripper for quick tool change. Drill head 13 spindle motor 1,5 kW, frequency 9 vertical spindles regulated, high speed (6 spindle in X direction; 4 spindle in Y-direction). 4 horizontal spindles (2 spindle in X direction and 2 spindle in Y-direction). Control power control PC 85. WoodWop software. Including tool holders and tools. Weight dimensions 32683 Barntrup (errors and omissions in the technical data as well as subject to prior sale) location.
2008
Price  
  DE   request
112265705 701

35.000 m³ for sale
crystalline sugar store tank


B 125 1 standing sugar silo store tank dismantled, content approx. 35.000 l complete constructet outr of stainless steel int. No. LSA-T 20 int the top with hand rails and an air vent outlet in the mi ...
used machine
 
. B 125 . . 1 standing sugar silo store tank. dismantled, content approx. 35.000 l. complete constructet outr of stainless steel. int. No. LSA-T 20. int the top with hand rails and an air vent. outlet in the middle with strong conical bottom. is standing on 4 stable round feet. Diameter of the tank is 2,40 m. outlet in the middle with NW 80. . Price up standing point: 3.300,00 Euro. .
2002
3,300 €  
  DE   request
112265699 104

MICROCUT PFG 2040 M for sale
Flat Grinding Machines


X-way table: 400mm Y-way table: 210mm table width: 160mm table length: 410mm rotation max.: 2.850 1min power: 1,5kW equipment: - cooling solution - magnetic table - diamant truing device - setup feet Ikhsoy ...
used machine
 
X-way table: 400mm. Y-way table: 210mm. table width: 160mm. table length: 410mm. rotation max.: 2.850 1min. power: 1,5kW. . equipment:. - cooling solution. - magnetic table. - diamant truing device. - setup feet. Ikhsoyv. - lightening. - central lubrication
1999
Price  
  DE   request
112265687 203

COSTA EURO 23 C for sale
Four side Planer


5 spindles, Spindelanordung: Bottom (5.5 kW) - right (7.5 kW) - links (7.5 kW) - top (7.5 kW) - UNI (4 kW), maximum working width: 230 mm, maximum working height: 150 mm, 2 driven rollers in the table feed: 27 m min.

 
5 spindles, Spindelanordung: Bottom (5.5 kW) - right (7.5 kW) - links (7.5 kW) - top (7.5 kW) - UNI (4 kW), maximum working width: 230 mm, maximum working height: 150 mm, 2 driven rollers in the table feed: 27 m min.
 
13,500 €  
  DE   request
112265679 106

YAMADA DOBBY ALPHA-30 for sale
Hydraulic Press


Pressing force: 300kN, fixed stroke: 20-50mm, speed: 1000strokemin, tool height: 230mm max., adjustment area: 50mm, table size: 550x450mm, ram area: 550x320mm, strip inlet width: 220mm, main motor power: 11kW, height: 2 ...
used machine
 
Pressing force: 300kN, fixed stroke: 20-50mm, speed: 1000strokemin, tool height: 230mm max., adjustment area: 50mm, table size: 550x450mm, ram area: 550x320mm, strip inlet width: 220mm, main motor power: 11kW, height: 2500mm, weight: 5.5t.
 
Price  
  DE   request
112265652 102

CZ 300 A for sale
Turning Machines (Lathes)


Lathe with table From site WeiÃ?wasser Sale and errors reserved Questions under 0049 172 - 79 66 561
used machine
 
Lathe with table. . From site WeiÃ?wasser. Sale and errors reserved. . Questions under 0049 172 - 79 66 561
 
Price  
  DE   request
112265635 404

INDUFLEX, MEUERER 800 x 5 kg /h for sale
Cardboard filling machines


D 123 5 kg gable carton packaging machine plant is standing without production since June 2017 and it is in a very good condition. The 5 kg gable carton filling machine exist about: a.) One round table gabl ...
used machine
 
D 123 . . 5 kg gable carton packaging machine. plant is standing without production since June 2017 . and it is in a very good condition. . The 5 kg gable carton filling machine exist about:. . a.) One round table gable carton filling machine. manufacturer year is 2004. Manufacturer is Induflex GmbH 27337 Blender. Serial No. 380 10801-02. capacity until to 800 packaging per hour. with sterile air covering inside of the filling machine. filled is fresh cream with 28 days shelf life. with carton magazine. with carton upfolder. with 2 filling plant, who filled up 2 packaging in the same time. with a gable carton sealing equipment. One electronic cabinet installed on the machine, . normal equipment. The filling head electric construction is made from ABB. Place requirement is: L x B: 2.22 x 1,92 m, high 3,55 m. pressed air vonccection is 8 bar, pressed air demand: 6 bar. electric power input is 30 KVA. weight of the machine is 3.000 kg. 1 centrifugal pump installed by a balance tank. for CIP back flowing.. . b.) with aproxx. 2 m plastic chain conveyor from . the outlet of the 5 kg carton filling machine. then 1 x 180° curve and 2 m chain conveyor with total . 3 motor drives into the inlet of the Meurer 5 kg carton . packaging machine. manufacturer of the chain conveyor construction . is Polyketting. . c.) One Meurer gable carton packaging machine. 2 packaging byside, 4 x 5 kg cartons in one in the top open 20 kg carton.. The gable carton measurements of the carton bottom is: 146 x 146 mm. High of one 5 kg gable carton is 256 mm. Measurement of the 20 kg carton is: L x B = 300 x 300 mm. max capacaity is: 5 x 20 packaging per minute. . The electronic system is changed to a new one in 2013. In the outlet is installed a transport conveyor approx. 2 m. From this conveyor the 20kg carton was packed on pallets by hand. . . Price up standing point: 38.500,00 Euro. . . . .
2004
38,500 €  
  DE   request
112265631 845  

HORIZON VAC 100 for sale
Brochure making machines


VAC-100m ST-40 ST-CV Transfer to the VAC tower (pile lowering table) SPF-200A ( Stitcher + Folder) SSK-200 ( Corner and block stitching device) FC-200A (Front-edge-Trimmer) HP-200A ( Punching pressing unit)) H ...
used machine
 
VAC-100m. ST-40 ST-CV Transfer to the VAC tower (pile lowering table). SPF-200A ( Stitcher + Folder). SSK-200 ( Corner and block stitching device). FC-200A (Front-edge-Trimmer). HP-200A ( Punching pressing unit)). Höhner Ring eyelet Stitching head 436 S. FST-200. SC-200 - short delivery
2008
Price  
  DE   request
112265629 407

GEA FINNAH 21.500 E/H asep. Typ 2300 for sale
Deep drawing machines


D 122 a. One aseptic working deep drawing and filling machine Manufacturer is GEA Finnah,Type 2300 capacity is 21.600 units per hour Manufacturer year is: 1998 size of the cups: 90 mm x 75 mm deep drawing foil ...
used machine
 
D 122 . . a. One aseptic working deep drawing and filling machine. Manufacturer is GEA Finnah,Type 2300. capacity is 21.600 units per hour. Manufacturer year is: 1998. size of the cups: 90 mm x 75 mm. deep drawing foil material is PS. . The dosing system of the filler can fill. 75 g to 300 g, all deep drawing tools without 75 g . are available. The machine was still standing since June 2017. The dosing system of the FFV filler can fill per stroke . 4 different colours . . The GEA FFV filling machine has in the operator electronic. installed a Siemens S 5 equipment.. . . After filling procedure the lid foil, which was sterilized . with H2O2 was laying on the filled cups and the GEA machine . drag this under the sealing station. . After sealing was done, the closed cup quit the sterile tunnel . and going under the press.. The press of the GEA machine cut single cups and the single . cups arrive after this procedure the 4 lane Polycetting transport . conveyor.. . The electronic system of the GEA Finnah filling machine and of . the sterile module is installed in 3 double door electronic cabinets.. The complete electronic system is active and sure available.. The machine is standing since Hune 2017-08-14. . The sterile module is standing on the left side of the GEA filling . machine (running direction). Configuration normal with 2 pipe heat exchanger and with sterile . module filter technique.. . Replacement stamping press is available. It was be pressed in the past only single cups.. . Further handling with the filled cups. b. Transport out of the GEA filling machine was well done . with a Polycetting transport conveyor, start with a 4-lane . plastic chain conveyor,. then reduction to 2 lanes and in the end (after 15 m) and . then with a 180 degree installed 1 lane conveyor curve . into the inlet of the Labeling machine. . c. The inlet to the crones labeling machine is a 1-lane conveyor. 2 label magazines are available. The both label spending unit spend on the wall of the rectangular . single cup in the same high 2 labels.. It seems like a cup body labelling, round about.. . d. 1 fourfold fruit container connection plant and a . white soft cheese mixing station.. Configurated with vertical installed dynamic working . Burdose mixer.. . . . . . e. Out of the Krones labeling machine the single qurk cups . with 4 fruit products will be transported with a 4-lane . plastic chain conveyor into the inlet of the tray packaging . machine.. 4 different cup, 20 cups per tray was packed.. Manufacturer of the packaging machine is Schäfer&Flottmann.. The packaging produce from a carton flat a tray with 4 pile corners, . without cup grids, measurements are: 200 x 300 mm. The machine is working with Nordson glue technique.. . f. The tray transport will be done with a plastic . chain conveyor from 1,20 m to 2,40 m high.. The tray are transport in a high of 2,40 m to the inlet . of the tray elevator.. The tray elevator lift the single tary one after one down . into the basement floor.. manufacturer transport conveyors is Polycetting,. manufacturer of the tray elevator is A&F.. . g. In the basement floor is standing the tray layer palletizer machine. Manufacturer is A&F. with empty Euro and chep Pallete magazine. the filled pallet is transport over a small roller conveyor . outside of the palletizer machine, . over an roller conveyor corner seat to approx. . 6 m roller conveyors.. . The pallet doest need a special pallet safety shrinking foil, . the piling corner of the trays bring enough stability.. . White soft cheese processing.. . h. The white soft cheese, germfree produced, would filled in . 2 equal constructed sterile tanks. This sterile tank equaipment is standing o a stable . stainless steel frame . The germfree white soft cheese was sucked out of the . 2 sterile tanks with big capsule pumps. . The 2 sterile tanks have a content of 1.500 kg and they have. both in the top a stirrer drive with a stirrer in “Z” form.. The outlet of the sterile tanks will be done with a outlet . pipe with automatic working vales in DN 120. . 1 small rectangular balance tank with a man hole in the top,. with a Alfa Laval centrifugal pump for CIP back ways.. . i. One foaming machine with 1 mixing head. Foaming will be done with Nitrogen gas.. with necessary valves and dosing systems. . 1 small high balance tank with a centrifugal pump before.. . . Price up standing point: 244.000,00 Euro. . . . . . .
1998
244,000 €  
  DE   request
112265609 103

PASO PROFIGRAF PS 1100 for sale
Milling Machines


Paso professional count 1100 • Year 1998 • Operating hours 120 635 h • Control Andronic 2000 • Drive Indramat DDS03 • HSK 40 tools • Spindle HSC 42 000 min-1 & ...
used machine
 
Paso professional count 1100. • Year 1998. • Operating hours 120 635 h. • Control Andronic 2000. • Drive Indramat DDS03. • HSK 40 tools. • Spindle HSC 42 000 min-1. • Spindle run time 34 607 h. • Traverse paths x 1100 mm. Y800 mm. Z450 mm. • Table length 1100 mm. Table width 860 mm.
1998
Price  
  DE   request
112265595 106

VIKTOR HAGENHOFF VH 250/02 for sale
Hydraulic Press


Table size: 2200x900mm, pressing force: 2500kN, stroke: 500mm, operational pressure: 280bar, piston diameter: 280mm, table hole diameter: 200mm, length: 3200mm, width: 1330mm, height: 3900mm, weight: 17t.
used machine
 
Table size: 2200x900mm, pressing force: 2500kN, stroke: 500mm, operational pressure: 280bar, piston diameter: 280mm, table hole diameter: 200mm, length: 3200mm, width: 1330mm, height: 3900mm, weight: 17t.
2004
Price  
  DE   request
112265350 605

R&S RS80 for sale
Crosslapper


Infeed table length: 1000mm, working width: 2500mm max., cloth width: 2700mm, infeed speed: 80m max., delivery speed: 15m, fineness range: from 0,8 dtex fibre length of all variants, total power: 50 kW, control: Siemen ...
used machine
 
Infeed table length: 1000mm, working width: 2500mm max., cloth width: 2700mm, infeed speed: 80m max., delivery speed: 15m, fineness range: from 0,8 dtex fibre length of all variants, total power: 50 kW, control: Siemens SPS S7-300.
2004
Price  
  DE   request
112265235 844  

HOBEMA suitable for siliconed paper for sale
paper sheeter


Special offer: Hobema used paper sheeter suitable also for siliconed paper in operation Special price for quick sale: 13600 euro exw Machine offered subject to unsold

 
Special offer: Hobema used paper sheeter suitable also for siliconed paper. in operation. Special price for quick sale: 13600 euro exw. . Machine offered subject to unsold. .
 
13,600 €  
    request
112264046 1200

Glass processing machine


Line 1 1. LH12 (Figure 1-1 to figure 1-3) Technical data ï?­ Diameter base frame: approx. 3,300 mm ï?­ Machine height: 2,850 mm ï?­ Diameter bubble tip diameter: 2,800 mm -Weight: 12,000  ...
used machine
 
Line 1. 1. LH12 (Figure 1-1 to figure 1-3). Technical data. ï?­ Diameter base frame: approx. 3,300 mm. ï?­ Machine height: 2,850 mm. ï?­ Diameter bubble tip diameter: 2,800 mm. -Weight: 12,000 kg. ï?­ Cleaner arm: 180 (220) mm. ï?­ Work stations: 12. Power range:. ï?­ maximum diameter: 190 mm. ï?­ Max length 400 mm. ï?­ Wall thickness 0,3-3 mm. ï?­ Production index: 12-49 PCs min. 2. hot off cutting machine (HAM) with input plate (figs. 1-4 and 1-5). a) technical data input plate. -Dimensions (L x W x H): 1,200 x 1,200 x 1400. -Weight: approx. 1.200 kg. ï?­ Performance: 40 PCs min. ï?­ Station number: 8. ï?­ Height gripper: 112 mm. ï?­ Table height: 50 mm. -Power range:. Article diameter: 30-190 mm. Raw glass height: 150-510 mm. b) technical data HAM. -Dimensions (L x W x H) 3,060 x 3,060 x 2.360 mm. -Weight: approx. 6,000 kg. ï?­ Performance: 8-35 piece min.. ï?­ Station number: 20. ï?­ Station speed: 0 â 300 RPM.. -Power range:. Article height: 155-430 mm. Raw glass height: 185-510 mm. Article diameter: 30-190 mm. Deposition diameter: 30-180 mm. Maximum residual glass diameter: 210 mm. Wall thickness: 210 mm. ï?­ Burner: mixing melting split ring burners, indoor. . 3. single girder Lehr with turning customer (Figure 1-6). a) technical data turning customers. -Dimensions: (L x W x H): 1.100 1.100 x 2,300 mm. -Weight: 300 kg. ï?­ Performance: 8-35 piece min.. ï?­ Station number: 4. -Power range:. Article height: 155-430 mm. Article diameter: 30-190 mm. Raw glass height: 185-510 mm. Product weight: 0.7 kg. b) technical data single girder. -Dimension (L x W x H): 2,000 x 3,100 x 2,500 mm. -Weight: approx. 700 kg. -Power range:. Performance: Max 35 PCs min. Article height: 100-430 mm. Article diameter: 30-190 mm. . Line 2 (fig. 2-1). 1. LH12 (Figure 2-2 and Figure 2-3). Technical data. ï?­ Diameter base frame: approx. 3,300 mm. ï?­ Machine height: 2,850 mm. ï?­ Diameter bubble tip diameter: 2,500 mm. -Weight: 12,000 kg. ï?­ Cleaner arm: 180 (220) mm. ï?­ Work stations: 12. Power range:. ï?­ maximum diameter: 190 mm. ï?­ Max length 400 mm. ï?­ Wall thickness 0,3-3 mm. ï?­ Production index: 12-49 PCs min. 2. hot off cutting machine (HAM) with input plate (figs. 2-4 and 2-5). a) technical data input plate. -Dimensions (L x W x H): 2,100 x 2.250 x 1400. -Weight: approx. 1.200 kg. ï?­ Performance: 40 PCs min. ï?­ Station number: 8. ï?­ Height gripper: 112 mm. ï?­ Table height: 50 mm. -Power range:. Article diameter: 30-190 mm. Raw glass height: 150-510 mm. b) technical data HAM. -Dimensions (L x W x H) 3,060 x 3,060 x 2.360 mm. -Weight: approx. 6,000 kg. ï?­ Performance: 8-35 piece min.. ï?­ Station number: 20. ï?­ Station speed: 0 â 300 RPM.. -Power range:. Article height: 155-430 mm. Raw glass height: 185-510 mm. Article diameter: 30-190 mm. Deposition diameter: 30-180 mm. Maximum residual glass diameter: 210 mm. Wall thickness: 210 mm. ï?­ Burner: mixing melting split ring burners, indoor. TELUX Immobilien GmbH. Glass processing line 2. 2. 3. single girder Lehr with turning customers (Figure 2-6). a) technical data turning customers. -Dimensions: (L x W x H): 1.100 1.100 x 2,300 mm. -Weight: 300 kg. ï?­ Performance: 8-35 piece min.. ï?­ Station number: 4. -Power range:. Article height: 155-430 mm. Article diameter: 30-190 mm. Raw glass height: 185-510 mm. Product weight: 0.7 kg. b) technical data single girder. -Dimension (L x W x H): 2,000 x 3,100 x 2,500 mm. -Weight: approx. 700 kg. -Power range:. Performance: Max 35 PCs min. Article height: 100-430 mm. Article diameter: 30-190 mm. . Location of WeiÃ?wasser
 
Price  
  DE   request
112255046 203  

REICHLE P1500 for sale
Planing Machine


Table size: 1500x900mm, tabel load: 2t, number of T-bolts: 5, T-bolt width x distance: 22H7x185mm, bed length: 4390mm, planing length: 1500mm, planing width: 1020mm, planing height: 810mm, planing height with traverse su ...
used machine
 
Table size: 1500x900mm, tabel load: 2t, number of T-bolts: 5, T-bolt width x distance: 22H7x185mm, bed length: 4390mm, planing length: 1500mm, planing width: 1020mm, planing height: 810mm, planing height with traverse support: 650mm, stroke speed cut: 9 14 22 35mmin, stroke speed return: 32 50mmin, traverse support feed rate: 0,1-6mmstroke, longitudinal support feed rate: 0.4-10mmstroke, connected load: 7.5kVA, length: 4300mm, width: 2400mm, height: 2300mm, weight: 9.2t.
1968
Price  
  DE   request
112101007 703

FEUMA FGC10 for sale
Cutters and vacuum cutters


Feuma FGC10 table cutter needed â?¢Bowl volume capacity: 10 litres Number of blades: 3 Speeds: 1 Dish solid stainless steel (no deep-drawn sheet metal) Knives shaft is available immediately after switch ...

 
Feuma FGC10 table cutter needed. . â?¢Bowl volume capacity: 10 litres. Number of blades: 3. Speeds: 1. Dish solid stainless steel (no deep-drawn sheet metal). Knives shaft is available immediately after switching off. completely in stainless steel. Removable cutter head. very good condition, should nevertheless be cleaned prior to use. . Video about test run and more pictures available!.
 
2,690 €  
  DE   request
112101004 101

EUMACH MC-800 P for sale
CNC Vertical Machining Center


Manufactured: Eumach Model: MC-800 P YOM: December 1996 Control: Heidenhain TNC-407 Tools changer: 24 tools BT-40 Table: 1200 x 635 mm Work area: X = 800 mm Y = 510 mm ...
used machine
 
. Manufactured: Eumach. Model: MC-800 P. YOM: December 1996. Control: Heidenhain TNC-407. Tools changer: 24 tools BT-40. Table: 1200 x 635 mm. Work area: X = 800 mm. Y = 510 mm. Z = 510 mm . Spindle Motor: 9 11 kw.. Spindle speed: 60-6000 rpm . Distance from spindle center to the machine column: 520 mm. Distance from spindle nose to table: 140-650 mm. Max. load on table: 500 kg.. Rapid travel: 12mmin. . . MACHINE CAN BE INSPECTED UNDER POWER.
1996
Price  
  PL   request
112100996 103

ANAYAK VH-PLUS 3000 for sale
CNC Horizontal Milling Machine


Manufactured: Anayak Mod: VH-PLUS 3000 YOM: December 2001 Control: Heidenhain TNC-430 M Tools changer: 100 tools Working range: X = 3000 Y = 1500 Z = 0-1768 mm Work table: 12 ...
used machine
 
Manufactured: Anayak. Mod: VH-PLUS 3000. YOM: December 2001. Control: Heidenhain TNC-430 M. Tools changer: 100 tools. Working range: X = 3000 . Y = 1500. Z = 0-1768 mm. Work table: 1250 x 1600 mm (U-axis). Max. load: 5 tons. . Milling head can switch from vertical to horizontal position automatically. The machine is equipped with an automatic universal milling head with B and C axis 2.5 °. Oil Cooled Spindle SK-50 DIN 69871 max. 4000 rpm with internal cooling 30 bar . . Machine can be inspected under power..
2001
Price  
  PL   request
112100992 103

ZAYER 30 KCU 7000 for sale
CNC Column Milling Machine


Manufactured: Zayer Model: 30 KCU 7000 YOM: November 2004 CNC: Heidenhain TNC 530M Axis movements: (L x W x H) 7000 x 1500 x 2500 mm Work tables: one fixed table size 2000 x 5000 mm  ...
used machine
 
. Manufactured: Zayer. Model: 30 KCU 7000. YOM: November 2004. CNC: Heidenhain TNC 530M . . Axis movements: (L x W x H) 7000 x 1500 x 2500 mm. Work tables: . one fixed table size 2000 x 5000 mm . one turntable size 1800 x 1800 with length motion W = 1500. . . Controlled angle milling head with positioning accuracy of 0.001 degree. Tools changer with 80 tools ISO 50 and internal cooling 20 bar. . The measuring probe is type Renishaw MP-16 for automatic measurement of the work piece and correction of zero point of clamping.. Max. work piece weight: 12 tons. . Machine can be inspected under power.
2004
Price  
  PL   request
112100989 107

TRUMPF TRUMATIC TC 260 R Rotation for sale
CNC Punching Nibbling Machines


Commute in X: 2800 mm Commute in Y: 1665 mm Table size: 5000 x 1570 mm Cutting force: 250 KN maximum sheet thickness: 6,4 mm maximum punching - diameter: 76.2 mm Total power consumption: 35 KVA 380 Volt Machine  ...
used machine
 
Commute in X: 2800 mm. Commute in Y: 1665 mm. Table size: 5000 x 1570 mm. Cutting force: 250 KN. maximum sheet thickness: 6,4 mm. maximum punching - diameter: 76.2 mm. Total power consumption: 35 KVA 380 Volt. Machine weight: approx. 20000 kg. . Equipment Accessories:. . 4-axis CNC control Trumagraph CC 300. 10 - Pocket tool changer. Light barrier. . All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.. Each party has the opportunity to test the machine before making a purchase in our factory under power..
1991
Price  
  DE   request
112100978 107

FLOW 8mx2m IFB DWJ 7220 - 6000Bar for sale
Water Jet Cutting Machines


REF.-No. 00427 Designation of the plant used water jet system Manufacturer flow Model IFB DWJ 7220 year 2010 Hours of operation 10.100 h Flow high-pressure intensifier pump HyperJet D. Pressure 6000 bar Workspa ...
used machine
 
REF.-No. 00427. Designation of the plant used water jet system. Manufacturer flow. Model IFB DWJ 7220 year 2010. Hours of operation 10.100 h. Flow high-pressure intensifier pump HyperJet D.. Pressure 6000 bar. . Workspace material contact area x axis 8000 mm (base). Y axis 2100 mm (boom). . Cutting range (a averaged) x axis 7200 mm. Y axis 2000 mm Z axis stroke 200 mm. . Workpiece height max. 175mm machine dimensions work table height 890 mm. . System X axis 9130mm. Y axis 3950mm. Z axis without high pressure pipework 2300 mm. . Available now. System must be by early September 2017 from the Hall out .
2010
Price  
  DE   request
112100970 107  

FLOW IFB DWJ 7220 for sale
Water Jet Cutting Machines


REF.-No. 00427 Designation of the plant used water jet machine XXL Manufacturer flow Model IFB DWJ 7220 year 2010 Hours of operation: 10.000 h Flow high-pressure intensifier pump HyperJet D. Pressure 6000 bar W ...
used machine
 
REF.-No. 00427. Designation of the plant used water jet machine XXL. Manufacturer flow. Model IFB DWJ 7220 year 2010. Hours of operation: 10.000 h. Flow high-pressure intensifier pump HyperJet D.. Pressure 6000 bar. . Workspace material contact area x axis 8000 mm (base). Y axis 2100 mm (boom). . Cutting range (a averaged) x axis 7200 mm. Y axis 2000 mm Z axis stroke 200 mm. . Workpiece height max. 175mm machine dimensions work table height 890 mm. . System X axis 9130mm. Y axis 3950mm. Z axis without high pressure pipework 2300 mm. . Available now. System must be by early September 2017 from the Hall out .
2010
Price  
  DE   request
112100953 1800

MULTIVAC C200 for sale
Professional Vacuum packing Machine


The table Chamber machine C 200 has a very large Chamber with a dimension of 465 x 355 x 150220 mm. Thus it offers than the smaller models to improve packaging performance and suitable for the packaging of larger produc ...
used machine
 
The table Chamber machine C 200 has a very large Chamber with a dimension of 465 x 355 x 150220 mm. Thus it offers than the smaller models to improve packaging performance and suitable for the packaging of larger products. The use of a pump with a capacity of 21 m3h ensures an efficient packaging.. . • 465 mm removable seal bar • double-seam with server Cap • tiled using magnetic stripe for the packaging of liquids • vacuum level set point by electronic timer • filler plates to reduce you the volume of the Chamber .
2007
3,300 €  
  DE   request
112100945 202

HAFFNER SL 75 for sale
Chain Mortiser


Motor: 0.75 kW, table-top model.

 
Motor: 0.75 kW, table-top model.
 
250 €  
  DE   request
112100943 831

POLAR 92 XT for sale


machine fully refurbished computer cutting programmes monitor display integrated in machine frame Touch Screen Infra-Red light guards two hand safety cutting back table guarding optical cutting line indication ai ...
used machine
 
machine fully refurbished. computer cutting programmes. monitor display integrated in machine frame. Touch Screen. Infra-Red light guards. two hand safety cutting. back table guarding. optical cutting line indication. air table - stainless steel. slot cover at back table. side table - resopal - air 750x750mm. 2 knives. 400 V - 7.8 A- 50 cycles.
2004
Price  
  DE   request
112100941 831

POLAR 92 EM-Monitor for sale


machine fully refurbished computer cutting programmes Monitor display 6-channel light guards two hand safety cutting back table guarding air table side tables (2) 2 knives
used machine
 
machine fully refurbished. computer cutting programmes. Monitor display. 6-channel light guards. two hand safety cutting. back table guarding. air table. side tables (2). 2 knives.
1992
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country