british flag
Resale Logo

TWO used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information service for gas engines  Engine Power Systems Thomsen & Co. GmbH   http://www.eps-kloska.com 
banner logo
start page > keywords TWO > results
maximum number of results exceeded > 1000
please refine your search
2887 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
112972030 301

CINCINNATI MILACRON VT-300-29 for sale
Two Injection Moulding Machines


Clamping force: 275t, platen size: 920x930mm, distance between tie bars: 640x620mm, daylight: 1070mm max., mold height: 203-640mm, ejector stroke: 430mm, clamping stroke: 580mm, voltage: 380V, heating voltage: 220V, curr ...
used machine
 
Clamping force: 275t, platen size: 920x930mm, distance between tie bars: 640x620mm, daylight: 1070mm max., mold height: 203-640mm, ejector stroke: 430mm, clamping stroke: 580mm, voltage: 380V, heating voltage: 220V, current: 123.9A, motor power: 50HP, number of machines: 2.
 
Price  
  DE   request
112951467 813

MULLER MARTINI 32 Grapha for sale


Colours : 4 Max. web width 820mm 4 units 24" 25" Alcohol dampening Roll to roll and zigzag Roll edge optical control Stroboscope Plate bender Horizontal and vertical perforation Two perfector, perfection 40,  ...
used machine
 
Colours : 4. Max. web width 820mm. 4 units 24" 25". Alcohol dampening. Roll to roll and zigzag. Roll edge optical control. Stroboscope. Plate bender. Horizontal and vertical perforation. Two perfector, perfection 40, 31, 22. New dampening rollers incl. chromic, new bearings. The machine is located in Eastern Europe. In production, can be inspected and tested
1982
41,000 €  
    request
112754853 702

Nougat Schneider


Nougat Schneider Make and year of manufacture unknown. By means of a mechanical horizontal baler with spindle drive nougat blocks are pressed against a wire device, so the nougat block will slowly cut into slices (simi ...
used machine
 
Nougat Schneider. Make and year of manufacture unknown.. By means of a mechanical horizontal baler with spindle drive nougat blocks are pressed against a wire device, so the nougat block will slowly cut into slices (similar to the principle Eierschneider). . Sequence:. -Inserting nougat block. -Control of the press with two-hand tripping. -Removal of the nougat discs. The shut-off is in the front and rear dead centre by means of roller lever switches.. For nougat blocks up to 150 150 400 mm.. The press is suitable also for other soft materials to split. .
 
Price  
  DE   request
112265732 202

WEINIG UNIVAR 1 Typ UFA 030 for sale
Profile milling machines


Profiling and to milling machine Weinig Univar 1, type: UFA 030, BJ 1986 Profiles running around to milling of Windows, doors with unequal Machine no. 030-372 Workpiece thickness of min. 30 mm 78 mm (without hub 12 ...

 
Profiling and to milling machine Weinig Univar 1, type: UFA 030, BJ 1986. Profiles running around to milling of Windows, doors with unequal. . Machine no. 030-372. Workpiece thickness of min. 30 mm. 78 mm (without hub 120 mm). Workpiece width of min. 30 mm workpiece length of min. 330 mm. Feed motor 0.75 of kW, feed speed 4.5-23 m min stepless adjustable brake. 1 spindles spindle of vertical right 11 kW, 6000 RPM. with constant velocity automatic out free crack to milling without counter profile. Spindelabremsung for equal and opposite. 2. spindle of vertical right 11 kW, 6000 RPM. Right vertical spindle for two tools spindle stroke vertical per 100 mm. Basic position under the table 6-16.5 mm. Spindle Ã? 50 mm maximum clamping height 285 mm. Tool air District 112-250 mm. Horizontal spindle stroke 100 mm against the parties stop, fine adjustment bar. separate for upper and lower tool position. Hydraulic adjustment in a u-shaped row against fixed stops. Central lubrication management stops before and after the spindles hydraulic 1-3 mm adjustable. Operating voltage 380 V 50 Hz. Control automatic workflow. freely programmable memory control with 60 programs. Each program contains up to 6 different edits per element. As a result, up to 360 different operations have to save.. . Special design milling unit 2.2 kW, 6000 RPM;. Spindle Ã? 40 mm, clamping height 90 mm;. Tool air district 140-180 mm;. Hydraulic horizontal movement programmatically.. Machine dimensions Lxwxh approx. 4500 x 2300 x 1600 mm. Weight 3500 kg. . (Errors and omissions in the technical data, as well as subject to prior sale).
 
1,000 €  
  DE   request
112265701 1101

MAN D2842 LE for sale


For sale one is D2866 LE two diesel cogeneration plants. The microturbines are in good condition. Technical data: Engine: One type: D2866 LE Power: 253 kW Year of construction: 1990 Fuel: Fuel oil Builder ...

 
For sale one is D2866 LE two diesel cogeneration plants. The microturbines are in good condition. . . . Technical data:. . Engine: One type: D2866 LE. Power: 253 kW. Year of construction: 1990. Fuel: Fuel oil. . Builder: Ansaldo. Type: (1) 17B 315 5A4; . Services: (1) 275 KVA; (2) 290 KVA; 1500 rpm. Voltage: 400 V. Frequency: 50 Hz. Year of construction: 1990. Hours of operation: (1) 3620 h; (2) 3589 h
 
Price  
  DE   request
112265689 1200

EUWA for sale
Active coal filter make Euwa, total capacity 57 hl


1 VA-activated charcoal filter brand EUWA, total content 5,770 l Brand: Euwa H.H Eumann GmbH Year of construction: 1988 Serial-No.: 1962AKF Performance: approx. 30 m ³h (depending on the intended use m ...
used machine
 
1 VA-activated charcoal filter brand EUWA, total content 5,770 l. . Brand: Euwa H.H Eumann GmbH. Year of construction: 1988. Serial-No.: 1962AKF. Performance: approx. 30 m ³h (depending on the intended use more). Total content: 5,770 l. Net capacity: 4.000 l. Operating pressure: 6 bar. Mass tank: diameter. = 1.60 m H frame = 2.50 m H tank = 3,20 m H ges. = 3.55 m (without buffer). Connections: 1 rest outlet diameter. internal = 110 mm flanged (bottom middle). 1 inlet diameter. inner = 170 mm flange (top frame) -.. Intake tube, diameter inside. 0.39 m, with VA sieve. 1-port above middle diameter. internal = 38 mm flange. 2 flanged manhole covers: closed 20 screws. 2 manholes: Diameter. outside = 0,645 m diameter. internal = 0.50 m 2 cover: material thickness 24 mm, diameter. outer 0,645 m with 20 holes, dia. =. . 22 mm bolt circle diameter 600 mm. 2 flange: Diameter. outside = 0,645 m diameter. internal = 0,495 m. Flange width 75 mm with 20 holes, diameter. 22 mm bolt circle diameter 600 mm. The two seals for the manhole covers must be bought new.. Floor nozzle: Diameter. approx. 1.58 m with removable center plate, diameter. = 0.59 m. Jets: bolted a 120 piece in nozzle plate stainless steel nozzle diameter. = 50 mm. Each nozzle has 4 holes with a diameter of about 3 mm each.. The nozzles are arranged in circular. in circles with 34 + 28 + 23 + 17 + 11 + 6 + 1 nozzle.. Floors: Dished. Other: with 3 crane eyelets top. TÃ?V Inspection Manual: a test log book for the tank does not exist at the time.. . We reserve the right to make changes, misapprehensions and sale.. Terms of payment: 100% prepayment or cash on collection.. Terms of delivery: from site Maxhütte free recharge truck dispatch through forwarding is possible at home and abroad, exact additional cost for this on request.
1988
Price  
  DE   request
112265638 301

ARBURG 305-210-700 for sale
Injection molding machines


Two 70 tons Arburgs available.
used machine
 
Two 70 tons Arburgs available.
1985
Price  
  FI   request
112265623 1510  

GÜTHLE-BAKA LC 1.0L for sale
Pallet stackers


Electric pallet truck two fabrikneue12V batteries,. Unladen weight 685 kg, load 1,000 kg, height approx. 2,900 mm fork length 1,150 mm, operation manual,. Support - and load rollers made of VULKOLLAN, the castors are  ...
used machine
 
Electric pallet truck. two fabrikneue12V batteries,.. Unladen weight 685 kg, load 1,000 kg, height approx. 2,900 mm fork length 1,150 mm, operation manual,.. Support - and load rollers made of VULKOLLAN, the castors are raised automatically by docking for the tool change,. Height 1,980 mm, free visibility mast, without charger. very good condition used little. because of operational task become free
1998
1,500 €  
  DE   request
112100987 206

HOMBURG DK SCH1 for sale
Carcass clamps


Pneumatic Korpusspresse, two stamps above, two stamp on the side. Press size approx. 1200 x 1120 x 650 mm. Machine dimensions L = 2100 B = 650 H = 2100 Machine weight 600 kg.
used machine
 
Pneumatic Korpusspresse, two stamps above, two stamp on the side.. Press size approx. 1200 x 1120 x 650 mm.. Machine dimensions L = 2100 B = 650 H = 2100. Machine weight 600 kg.
1971
Price  
  DE   request
112100983 105

HOFFMANN MS 35 for sale
Double Miter Saws


Double cut saws for woodaluminiumPVC. At the time equipped with saw blades for wood. Miter cutting two times 45 degrees. Material cut to up to 90 x 90 mm. length stop. 2 x 1.8 KW, Drehzadl 2850 rpm, 380-400 V, 6 bar ...
used machine
 
Double cut saws for woodaluminiumPVC. At the time equipped with saw blades for wood.. Miter cutting two times 45 degrees.. Material cut to up to 90 x 90 mm. length stop.. 2 x 1.8 KW, Drehzadl 2850 rpm, 380-400 V, 6 bar.
2006
Price  
  DE   request
112100943 831

POLAR 92 XT for sale


machine fully refurbished computer cutting programmes monitor display integrated in machine frame Touch Screen Infra-Red light guards two hand safety cutting back table guarding optical cutting line indication ai ...
used machine
 
machine fully refurbished. computer cutting programmes. monitor display integrated in machine frame. Touch Screen. Infra-Red light guards. two hand safety cutting. back table guarding. optical cutting line indication. air table - stainless steel. slot cover at back table. side table - resopal - air 750x750mm. 2 knives. 400 V - 7.8 A- 50 cycles.
2004
Price  
  DE   request
112100941 831

POLAR 92 EM-Monitor for sale


machine fully refurbished computer cutting programmes Monitor display 6-channel light guards two hand safety cutting back table guarding air table side tables (2) 2 knives
used machine
 
machine fully refurbished. computer cutting programmes. Monitor display. 6-channel light guards. two hand safety cutting. back table guarding. air table. side tables (2). 2 knives.
1992
Price  
  DE   request
112100917 831

POLAR 115 EMC-Mon for sale


EMC2 electronic computer cutting programmes Monitor display 10-channel light guards FFM light beam guards two hand safety cutting back table guarding air table slot cover at back table side tables (2) -cast iro ...
used machine
 
EMC2 electronic. computer cutting programmes. Monitor display. 10-channel light guards. FFM light beam guards. two hand safety cutting. back table guarding. air table. slot cover at back table. side tables (2) -cast iron. 2 knives. 420V - 9.8A - 50Hz - 3 Phase. Dims incl side tables W265 x D270 x H170cm. Gross weight: 4.000 kg.
1992
Price  
  DE   request
111928600 1406

CALJAN SAFE TRACK CB3M 5/7-600 for sale
Telescopic conveyor


Properties < b >: < b > Used telescopic belt conveyor Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Co ...
used machine
 
Properties < b >: < b >. . Used telescopic belt conveyor. Condition: fully functional with traces of use. Ideal for the fast material handling. Expertly disassembled and packed. Color: Blue. 4 STK. in stock. Price per piece. . Telescopic belt conveyors < b > < b >. . The telescopic belt conveyor is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation of telescopic belt conveyors can promote sensitive and different-sized containers, boxes or other packaging and article units to the task or place of delivery and, for example, also serves as a connecting route before or between production and processing machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.. . Technical data < b >:. . See PDF file. . Tailor-made solutions < b > for your intralogistics < b >. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
2007
Price  
  DE   request
111928595 1407

INTERROLL Tragrolle for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 430 mm Axle length: 470 mm Roll diameter: 50 mm Shaft diameter: 8 mm Material: Steel, galvanised 6-kant: approx. 11 x 11 mm Tailor-made soluti ...

 
Properties < b >: < b >. . Roll length: 430 mm. Axle length: 470 mm. Roll diameter: 50 mm. Shaft diameter: 8 mm. Material: Steel, galvanised. 6-kant: approx. 11 x 11 mm. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. . .
 
Price  
  DE   request
111928413 1407

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 640 mm Length: 655 mm Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright Tailor-made solutions for your intr ...

 
Properties < b >: < b >. . Roll length: 640 mm. Length: 655 mm. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111928409 1407

Roller rail curve s curve curve


Properties < b > < b > Used s roles railway curve Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Feet to ...

 
Properties < b > < b >. . Used s roles railway curve. Condition: fully functional with traces of use. Ideal for the fast material handling. Expertly disassembled and packed. Feet to be ordered separately. Color: Blue. . Technical data:. . Mass of rolling railway curve. Total width approx.: 510 mm. Curves angle: approx. s-curve. Overall length: 1560mm. . the role < b > details < b >. Clamping length approx.: 440 mm. Roll diameter: 50 mm. Center distance inside: approx. 70mm. Center distance outside: approx. 100mm. Material: Plastic. . the framework < b > details < b >. Frame height: 67 mm. Frame width: 30 mm. Material: Steel. . Roller rail curve. . Thanks to the superb craftsmanship of the roller path curve glides your material, even under high load, gently to the place of destination.. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111928401 1407

Roller rail curve conveyor curve by 180 °


Properties < b >: < b > Used roles railway curve Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Feet to ...

 
Properties < b >: < b >. . Used roles railway curve. Condition: fully functional with traces of use. Ideal for the fast material handling. Expertly disassembled and packed. Feet to be ordered separately. Color: Blue. . Technical data < b >: < b >. . Mass of rolling railway curve. Total width approx.: 635 mm. Curves angle: approx. 180 degrees degrees. . the role < b > details < b >. Clamping length approx.: 510 mm. Roll diameter inside: 30 mm. Diameter outside: 65 mm. Center distance inside: approx. 35mm. Center distance outside: approx. 85mm. Material: Plastic. . the framework < b > details < b >. Frame height: 140 mm. Frame width: 30 mm. Material: Steel. . Rolling trajectory < b > < b >. . Thanks to the superb craftsmanship of the roller path curve glides your material, even under high load, gently to the place of destination.. . Tailor-made solutions < b > for your intralogistics < b >. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111927620 1406

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 640 mm Length: Thread to the screw Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright The roles are not used ...

 
Properties < b >: < b >. . Roll length: 640 mm. Length: Thread to the screw. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . The roles are not used.. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111927618 1406

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 550 mm Length: Thread to the screw Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright The roles are not used ...

 
Properties < b >: < b >. . Roll length: 550 mm. Length: Thread to the screw. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . The roles are not used.. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111927616 1406

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 550 mm Length: 565 mm Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright The roles are not used. Tailor-m ...

 
Properties < b >: < b >. . Roll length: 550 mm. Length: 565 mm. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . The roles are not used.. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111927614 1406

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 450 mm Length: Thread to the screw Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright The roles are not used ...

 
Properties < b >: < b >. . Roll length: 450 mm. Length: Thread to the screw. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . The roles are not used.. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111927612 1406

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 450 mm Length: 465 mm Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright The roles are not used. Tailor-m ...

 
Properties < b >: < b >. . Roll length: 450 mm. Length: 465 mm. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . The roles are not used.. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111927608 1406

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 300 mm Length: Thread to the screw Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright The roles are not used ...

 
Properties < b >: < b >. . Roll length: 300 mm. Length: Thread to the screw. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . The roles are not used.. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111926085 1406

INTERROLL for sale
Interroll conveyor roller support roller


Properties < b >: < b > Roll length: 300 mm Length: 320 mm Diameter: 50mm Material: Polyvinyl chloride Color: Grey Axle material: Steel, bright Tailor-made solutions for your intr ...

 
Properties < b >: < b >. . Roll length: 300 mm. Length: 320 mm. Diameter: 50mm. Material: Polyvinyl chloride. Color: Grey. Axle material: Steel, bright. . Tailor-made solutions for your intralogistics. . We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.. . Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.. . Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
  DE   request
111877246 400

SORMA P04 125S for sale
Multi channel weighing machine


4 channel weighing machine for Citrus, Stone Fruit, Kiwis, Tomatoes, and more. The P04-125S can work with several different packaging machines, each with different weights, at the same time. It consists of a weighin ...
used machine
 
4 channel weighing machine for Citrus, Stone Fruit, Kiwis, Tomatoes, and more. . . The P04-125S can work with several different packaging machines, each with different weights, at the same time. It consists of a weighing system based on static load cells, four containers that take the weight and two independent discharge belts.. . 50 packagesminute; 0.5-6kg Bags . . 400V 3kW-50Hz. . The machine is in working condition, possible to test.
2001
14,900 €  
  HU   request
111759073 503

JEFFREY 700HP SWS for sale
Hammer mills


effrey hammermill that can be delivered with or without a motor. It can handle up to 600kW (800HP) electric or 1250HP diesel. This hammermill is nearly used and comes with many spares (hammers, caps, grates). It al ...
used machine
 
effrey hammermill that can be delivered with or without a motor. . It can handle up to 600kW (800HP) electric or 1250HP diesel. . . This hammermill is nearly used and comes with many spares (hammers, caps, grates). It also contains all the documentation.. . JEFFREY SWS 680 hammer mill. Power of shredder: up to 600kW electric or 1250HP diesel. Feed opening: 2.000 x 910mm. Shred opening: 2.000 x 910mm. Number of rotors: 1. Length of rotor: 2.000mm. Diameter of rotor: n.a.. Knives Hammers: Hammers of 60kgs (incl. caps). Capacity: 10 th. Output size: 15 x 10mm. Year of construction: 1995 but only used for 500h. . Additional information: . Heavy constructed hammermill incl. lots of spare hammers, caps and grates. . Only used for max. 500h.. Incl. two clutches (up to 600kW 1.000 rpm). Incl. hydraulic unit to openclose the shredder. . We have sold two similar Jeffrey mills in the past and have all documentation and instructions available in English.. . Optional: we can supply a 560kW electric motor for 30.000,- EURO extra.
1995
90,000 €  
  NL   request
111759068 802

ROLAND 202 EOB for sale


-Two colours size 52x74 cms. -Year 2002, 21 mil. original copies -Only one owner -Alcohol dampening with refrigeration system -RCI ink and plate registers remote control -Grafometric quick action plate clamps -Auto ...
used machine
 
-Two colours size 52x74 cms.. -Year 2002, 21 mil. original copies. -Only one owner. -Alcohol dampening with refrigeration system. -RCI ink and plate registers remote control. -Grafometric quick action plate clamps. -Automatic blanket washers, Chromed cylinders . -WEKO powder sprayer. -Antistatic equipment, all manuals and tools. -Available in September 2017
2002
30,000 €  
  IT   request
111758993 107

SAFAN PLCS 150x3000 for sale
CNC Pressbrakes


press power max.: 150t working width max.: 3.100mm control unit: ARA width between frames: 2.550mm required power: 11kW way back gauge: 550mm installation height max.: 490mm Czxih0xs back stroke speed: 41mms  ...
used machine
 
press power max.: 150t. working width max.: 3.100mm. control unit: ARA. width between frames: 2.550mm. required power: 11kW. way back gauge: 550mm. installation height max.: 490mm. Czxih0xs. back stroke speed: 41mms. . equipment:. - CNC control unit for bending cylinder Y1 Y2 and back gauge system in X-R- and Z axes. - motorized crowning. - hydraulic upper tool clamping. - 1 set upper- and lower tool. - two moveable lay-on arms. - two-hand user panel with foot switch. - user manual
1995
Price  
  DE   request
111576674 1707  

IBM DS3524 disk system for sale
IBM DS3524 disk system: 2 x 1746-C4A controller, 6


We sell: 1 x IBM DS3524 disk system complete configuration consisting of: 2 x IBM 1746-C4A controller 6 x IBM 1746-E4A expansion No HDD in these systems. HDD can be supplied on request. More informat ...

 
. We sell:. . 1 x IBM DS3524 disk system. . complete configuration consisting of:. . 2 x IBM 1746-C4A controller. 6 x IBM 1746-E4A expansion. . No HDD in these systems. HDD can be supplied on request. . . . More information on request.. . We welcome requests from Germany and abroad.. . We have many more refurbished or used hardware from the areas of these systems, as well as from areas of other systems of this manufacturer available: FUJITSU, IBM, SUN, HP, f, UNISYS, DELL, HDS, STK, FSC, NETAPP, SGI, BULL, CPQ, LSI.. . We also have large holdings of system components at any time by:. 3Com, ADVA, Alcatel, Avaya, Brocade, Cabletron, Cisco, CNT, Enterasys, extreme networks, foundry, Huawei, in range Marconi, McData, Nortel, QLogic, and many more.. . Certified, tested, used hardware cheap from HASCON!. . We have available over 90% of the hardware of all well-established manufacturers that has been on the market for over 12 months, e.g., from: FUJITSU, IBM, SUN, HP, EMC, UNISYS, DELL, HDS, STK, FSC, NETAPP, SGI, BULL, CPQ, LSI.. We have available, at any time, large numbers of components by 3Com, ADVA, Alcatel, Avaya, Brocade, Cabletron, Cisco, CNT, Enterasys, extreme networks, foundry, Huawei, in range Marconi, Nortel, McData and QLogic.. .
 
Price  
  DE   request
111576672 1707  

IBM DS3524 disk system for sale
IBM DS3524 disk system: 2 x 1746-C4A controller, 6


We sell: 1 x IBM DS3524 disk system complete configuration consisting of: 2 x IBM 1746-C4A controller 6 x IBM 1746-E4A expansion No HDD in these systems. HDD can be supplied on request. More informat ...

 
. We sell:. . 1 x IBM DS3524 disk system. . complete configuration consisting of:. . 2 x IBM 1746-C4A controller. 6 x IBM 1746-E4A expansion. . No HDD in these systems. HDD can be supplied on request. . . . More information on request.. . We welcome requests from Germany and abroad.. . We have many more refurbished or used hardware from the areas of these systems, as well as from areas of other systems of this manufacturer available: FUJITSU, IBM, SUN, HP, f, UNISYS, DELL, HDS, STK, FSC, NETAPP, SGI, BULL, CPQ, LSI.. . We also have large holdings of system components at any time by:. 3Com, ADVA, Alcatel, Avaya, Brocade, Cabletron, Cisco, CNT, Enterasys, extreme networks, foundry, Huawei, in range Marconi, McData, Nortel, QLogic, and many more.. . Certified, tested, used hardware cheap from HASCON!. . We have available over 90% of the hardware of all well-established manufacturers that has been on the market for over 12 months, e.g., from: FUJITSU, IBM, SUN, HP, EMC, UNISYS, DELL, HDS, STK, FSC, NETAPP, SGI, BULL, CPQ, LSI.. We have available, at any time, large numbers of components by 3Com, ADVA, Alcatel, Avaya, Brocade, Cabletron, Cisco, CNT, Enterasys, extreme networks, foundry, Huawei, in range Marconi, Nortel, McData and QLogic.. .
 
Price  
  DE   request
111576665 1004

OMAG OMAG Tronic 140 / 90 for sale
Concrete block production equipment


Machinery: POS. 9 1 PCs. Brettentspelgerät year 1994 Fabr. Omag POS. 10 1 PCs of used concrete block machines Fabr. Omag built 1994 OMAGTRONIC 140 90 S 22 with core and attachment Board size 14 ...
used machine
 
Machinery:. . POS. 9. 1 PCs. Brettentspelgerät year 1994 Fabr. Omag. . POS. 10. 1 PCs of used concrete block machines Fabr. Omag built 1994 OMAGTRONIC 140 90 S 22 with core and attachment Board size 1400 x 1000 mm with Formenschnellverspannung. . POS. 11. 1 used Board supply hub Director Fabr. Omag. . POS. 12. 1 used hub Manager 20 floors just Board 1400 x 1000 x 60 mm floor clearance 300 600 mm Fabr. Omag. . POS. 13. 1. gebrauchters Speichergrüst (buffer) travels before wet head 1 x Board 1400 x 1000 x 60 mm floor clearance 300 600 mm Fabr. Omag. . POS. 14. 1 used fully automatic vehicle group with hub and bearing arm adjustment easy Board. 20 floors floor clearance 300 600 mm Fabr. Omag. . POS. 15. 1 Stck.gebrauchtes drying rack 8 Chambers 15 spaces 20 floors 300 boards per Chamber 2400 pitches 1 Chamber overall, reserve floor clearance 300 600 mm Fabr. HS. . POS. 16 1 used countersunk head 20 floors just 1400 x 1000 x 60 mm serial board. Omag. . POS. 17. 1 used Steinlöser Fabr. Omag. . POS. 18. 1 used wire strapping horizontally. . POS. 19. 1 used Doppler Fabr. Omag. . POS. 20. 1 used sliding table (grouping) serial. Omag. . POS. 21. 1 Stck.gebrauchter four pages Packager with hydraulic rotation device serial. Omag. . POS. 22. 1 used apron conveyor Fabr. Omag. . POS. 23. approx. 2000 Unterlagsbretter used softwood 1400 x 1000 x 60 mm, 2 years old. . POS. 24. approx. 50 PCs. used different formats, different manufacturers concrete stone molds. . Tel. 0049 171 6232 061. .
1993
Price  
  DE   request
111576653 101

INDUMASCH 206 for sale
Hydraulic notching machine


Hydraulic notching machine Manufacturer: Indumasch Type: 206 Year of construction: 1995 2014 ueberarbeitet detectable with Bill from Indumasch) The hydraulically operated notching machine universal-206-makes ...

 
Hydraulic notching machine. Manufacturer: Indumasch. Type: 206. Year of construction: 1995 2014 ueberarbeitet. detectable with Bill from Indumasch). . The hydraulically operated notching machine universal-206-makes a continuously variable notching in corners of 30-135 degrees possible. . The rugged construction of machine allows cutting capacity of 6 mm. . Pivoting knife carrier via Handwheel adjustable after graduation on the machine table. The attacks also can be adjusted after a Gradeiteilung. Hirzu there are ways of ventilation of the sheet location. . Table clamp is manually. Two additional pressure switch Mzpa7. . Table dimensions: 1000 x 800 mm. Blade length: 200 mm. Max cutting capacity: 6 mm. Maximum cutting performance stainless steel: 4 mm. Infinitely adjustable cutting head: 30-135 degrees. Motor: 3 kW. Oil tank: 60 litres. Strokes min: 60. . Technical data operator data and are therefore not binding
 
Price  
  DE   request
111576418 401

PROCOMAC RN S.R.L., ITALY HAL SP PET 36.36.6. Monoblock for sale
PET Bottle Filler Procomac HAL Monoblock 12000 bph


PET Bottle Filler Procomac HAL Monoblock 12.000 bph PET bottle rinsing, filling and capping monoblock made by Procomac in 2003. In the rinser first treatment is with water and ozone, the second treatment is with ster ...
used machine
 
PET Bottle Filler Procomac HAL Monoblock 12.000 bph . . PET bottle rinsing, filling and capping monoblock made by Procomac in 2003. In the rinser first treatment is with water and ozone, the second treatment is with sterile water. The filler has gravity filling with 36 filling valves and it is suitable for non-carbonated drinks only. This machine has two AROL capping stations both with 6 positions, one for 38 mm sport caps and the other for standard 38 mm caps. Complete monoblock is equipment with automated CIP system. . . Manufacturer: Procomac RN S.r.l., Italy . Model: HAL SF PET 36.36.6. Serial no: BLK01297 . Year: 2003. Capacity: 12.000 bph (0.33 and 0.5 ltr), 6.600 bph (1.5 ltr) . Rinser: Gripstar 2R 36.108.125.6 . Filling heads: SFP, 36 pcs. Capping: AROL Euro PK, 6 + 6 pcs. Pitch: 125.6 mm. Electricity: 8.87 kW, 400 V, 50 Hz . Condition: Good. .
2003
Price  
  FI   request
111338472 301

ENGEL Duo 940M/940H/650 Combi M Hybr for sale
Plastic injection machines


Offer offer: Angel D uo 940M 940 H 650 C ombi M 2 x Angel Viper40 robot CA 35000wh Year year 201 0 date of delivery delivery time approx. 35-43 2017!
used machine
 
Offer offer:. . Angel D uo 940M 940 H 650 C ombi M 2 x Angel Viper40 robot CA 35000wh. . Year year 201 0 date of delivery delivery time approx. 35-43 2017!.
2010
Price  
  AT   request
110944017 201

RAIMANN KR 310 M2 for sale
Multi-blade saws


-in stock -After reviewing the technical -Year of construction 2009 -with two floating pilami automatically TECHNICAL PARAMETERS: -Crawler width 340 mm (Spikes) -Cutting width 310 mm Cutting heightpivot s ...

 
-in stock. -After reviewing the technical. -Year of construction 2009. . -with two floating pilami automatically. . TECHNICAL PARAMETERS:. . -Crawler width 340 mm (Spikes). -Cutting width 310 mm. . Cutting heightpivot saws:. -No trzewik dociskaj?cego 135 mm. -with shoes 100 mm. . The height of the cuttingmultiblade:. -No trzewik dociskaj?cego 135 mm. -with shoes 115 mm. . -The length of the workpiece min 480 mm. -Clearance Width 800 mm max.. -The width of the ground clearance on the right side of the pi?y150 mm. . -Main engine 55 kW. -Feed Motor 3 kW. -8-80 feed speed mmin. . – Saw blade Diameter minmax 250380 mm. – Internal hole diameter saw blade 80 mm. -Spindle speed 3900 Umin. . -Spindle diameter 65 mm. -The height of the saw blade spindle set electronically. . -Fixed Sleeve extended. -2 sleeves moving each one saw. -Additional front (Multiblade). . -Positioning System for smooth adjustment of 2 movable saws. -System control Proficut 2. to control the two bushes saw. SPS control; 100 software on each PivotTable view,. . -Touch control panel RipAssist for Proficut 12. -Cutting width optimization Program supports Joystick and touch panel. -Laser-line 1 and 2 removable, adjustable, synchronized with the realignment of saws. . MACHINE SIZE:. . -the length of the 2200mm. -width: 1900 mm. -height 2000 mm. . Weight approx. 3400 kg. . -Input System podawczo-reception RaiMech E5. -Belt Conveyor:. . -Motor 0.75 kW. -Conveyor lengthwidth 2800 mm600 mm. -Belt speed in sync with the feed rate of the saw. . -Electricity 400 V50 Hz. . RaiMech and 6. . -System-transverse Conveyor with sorting and return. -System, transverse conveyor RBAQL + R length 5000 mm, width 2100 mm, 30 mmin, 8 x chains. – Max. length 5200 mm. . Transverse Transport items ready for the right and left:. -Sorting Tape SFB (x 2) length 1000 mm. -W. 1800 mm, max. length 2200 mm. . – Motor 0.25 kW, 5 mmin. -Set on the right next to the cross conveyor to pickup that has been cut strips. . -Return Tape RFB (x 2). – Motor 0.37 kW, 30 mmin,. . Dimensions:. . -the length of 1000 mm,. -width. 600 mm. . -Set on the left side of the cross conveyor, transporter return leftovers. -Electricity 400 V50 Hz. . -We reserve the possibility of mistakes-technical changes in
 
Price  
  PL   request
110943985 201

FOD BYDGOSZCZ DPPA III 50 for sale
Multi-blade saws


-Machine in stock -After review, prepared to work -Production Machine Polish FOD BYDGOSZCZ TECHNICAL PARAMETERS: -ground clearance levels edging 700 mm -vertical ground clearance 140 mm – the largest spac ...

 
-Machine in stock. . -After review, prepared to work. . -Production Machine Polish FOD BYDGOSZCZ. . TECHNICAL PARAMETERS:. . -ground clearance levels edging 700 mm. -vertical ground clearance 140 mm. – the largest spacing saws from 50 to 500 mm. . -maximum diameter of saw blades for 400 mm. -spindle speed saws 3000 rmin. . 2 shafts-top-gear-extending. 3-smooth-pulling. . -Minimum lenght 700 mm squares. -main engine 30 kW. -Cutting height adjustable manually. . THE MAIN FEATURES OF THE MACHINE:. . robust construction. production of Polish reputable brand FOD-the leader among manufacturers of wielopi?. the commendable. for each professional. . Edging dimensions:. . -length of 250 cm. width 150 cm. -height 190 cm. . -machine weight NET approximately 2500 kg lift capacity. . -technical condition very good. . Bilateral Edger is designed for two-sided trimming boards and bali.. . Sawing sawn timber in obrzynarce disc saws is held fixed on the spindle. One of the sleeve is fitted on the spindle, and the other has a chance to move in August along the spindle giving different width lumber squares.. . Wrzecionono embedded is on the one hand, on rolling bearings in the edging on a permanent basis, and, on the other hand, supported the bearing swivellable clamp, after leaving which is possible free promotion combined with sleeve to the Exchange or saw sharpening.. . The purpose of a better use of wood on each sleeve can be mounted to 3 saws which allows you to cut obrzynanego with waste.. . Drive spindle receives by belt transmission with positions from the engine set outside the body of the machine. Obrzynana timber is carried out five rolls posuwowymi, three lower smooth and two upper with t-slots.. . Top battle embedded special control arms are common articulation by which it is possible to raise them to any height depending on the thickness of the treated lumber. All the fight are driven chain receiving drive through reducer of DC motor.. . Mobile saws movement is hydraulic.. . The actual location of the saws, sliding, and the position of the upper rollers can be seen from the front of the machine on the scale from moving.. . -fully operational, after review of the. -ability to check on the place of purchase and transport. -We send machines in every corner of the country. -the possibility to leave another machine in the settlement
 
Price  
  PL   request
110943941 201

A.COSTA PUMA 2/50 for sale
Multi-blade saws


-Machine in stock -After reviewing the technical -Perfect condition Technical data: -Maximum cutting width 380 mm -Crawler width 350 mm -Two shafts of diameter fi 60 mm -Two engines 2 x 55 kW -Feed Engine 2kW ...

 
-Machine in stock. -After reviewing the technical. -Perfect condition. . Technical data:. . -Maximum cutting width 380 mm. -Crawler width 350 mm. -Two shafts of diameter fi 60 mm. -Two engines 2 x 55 kW. -Feed Engine 2kW. -Sleeves. . -Cutting height 200 mm. -Adjustable feed speed on the inverter. -Electrically adjustable cutting height. -Central lubrication. -Diameter exhaust-2 x 210 mm. -Each shaft adjustable independently. . Overall dimensions of the machine:. -Length: 210 cm. -Width 210 cm. -Height 180 cm. -Weight 4000 kg. . Upgradeable machines:. . -extraction of sawdust-different types of. -hoses-various diameters. -turbine-different powers. -disc-saws (GLOBUS or FABA)
 
Price  
  PL   request
110943803 706

GAI S.P.A. 5103 for sale
Bottle washer-dryer


Characteristics: Automatic washer-dryer in stainless steel with intermittent movement composed of: [1] Bottles washing station. [2] Drying bottles station. Infeed screw bottles inlet. Equipped for one type of cylind ...

 
Characteristics:. Automatic washer-dryer in stainless steel with intermittent movement composed of:. [1] Bottles washing station.. [2] Drying bottles station.. Infeed screw bottles inlet.. Equipped for one type of cylindrical bottle.. Machine supplied with security guards according to CE standards.. . Disks allow bottles rotation and are kept hold by pneumatic bottles-pushing heads.. The basement is covered by soundproofing materials to reduce noise.. The formats height adjustment is manual with the use of a single knob for two stations.. . Bottle Ø 60-115mm h 170-400mm. Monobloc movement type: Intermittent. . -WASHING STATION. Bottle bottom brush: 1. Capsule brush: 1. Body washing brush: 2. . -DRYING STATION. Heads for bottle capsule, neck and shoulder dry: 2. Rubber wiper for bottle body dry: 1. Lateral blowers (adjustment according to diameter) for final body dry: 3. Device for bottle bottom dry: 2. Speed 400-2400 bottleshour (speed adjustment with inverter). Manufacturer: GAI S.p.A.. Model: 5103W. Code: GAI-5103W-R0. Category: AUTOMATIC FULL BOTTLES WASHER AND DRYER
 
Price  
  ES   request
110785987 211

JOSTING - KUPER EFS 3200 L for sale
Veneer clippers


Veneer package slicer, veneer punch Josting EFS3200L, virtually unused Please note video, because pictures say more like a thousand words. See the video below for the attached documents. The perfect veneer package ...
used machine
 
Veneer package slicer, veneer punch Josting EFS3200L, virtually unused. . Please note video, because pictures say more like a thousand words.. See the video below for the attached documents.. . The perfect veneer package cutting veneer cutter. . Cutting length 3230 mm. hydraulically driven pressure bar with two pressure stages. Cutter bar drive with brake motor, gearbox and crank operation. RIP fence motor powered positioning control KUS version 3.0. Control with single dimensional input, incremental measurement and storable width. To measure input and press the Start button, the widths stop automatically moves to position. Gently remove of the plywood through the "eject"-button, the width stop moves automatically to some cm forward, this plywood prior to the cutting line is located, shortly after the stop again moves to the preset value. Just as easily, chain dimensions are possible, the stop postioniert automatically after the cut to the eingegestellte incremental measure forward, also several times in a row, see video.. Integrated section counter. Mark the cutting line by setting go-ahead. mm inch - switching. Width guide from 20 to 720 mm usable. Electric connection 400V 7, 7kW. 2-hand operation. Light beam safety front and rear guards. Super cutting quality thanks to immersion angle of 20 degrees and pulling knife movement. Additional plate right to cross cut. . CE mark. Operating instructions. Including a used replacement blades and two new cutting edges, the cut edges can be turned by up to 16 times use.. . Original paint, to see great condition in original photos.. . With this machine, there is unfortunately no hour meter. It is indeed hard to believe, but the machine was not used obviously practical. It was still an original boxed replacement blade, which is now located on the machine. The blade mounted on the machine is never been sharpened, it has still the original width of 130 mm! Best viewing is the machine with us, she's practically in mint condition.. . Dimensions approx. 4600 x 1700 x 1750mm (Lxwxh). Weight 4000kg.. . Please the PDF file with our terms and conditions and order form.. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
2008
29,000 €  
  DE   request
110785939 802

HEIDELBERG Speedmaster 52-2 P for sale


-Two colours size 36x52 cms. with 11 or 20 -Year 1997, 20 mil. copies -Alcolor with refrigeration system, Autoplate, Automatic washing devices, Preset -Table control with CPC 1.04, Cptronic -Plate punch and bender, ...
used machine
 
-Two colours size 36x52 cms. with 11 or 20. -Year 1997, 20 mil. copies. -Alcolor with refrigeration system, Autoplate, Automatic washing devices, Preset. -Table control with CPC 1.04, Cptronic. -Plate punch and bender, all manuals, excellent conditions
1997
29,000 €  
  IT   request
110785849 836

CAMCO ROSBACK 203 for sale
Saddle Stitcher


Fully automatic Gathering Stitching Trimming (saddle-stitcher) CAMCO Autosticher Model 203, Year 1994 -Six stations with 2 stitching heads ( can add other two ) , belt delivery for exercise books magazines, brochures,  ...
used machine
 
Fully automatic Gathering Stitching Trimming (saddle-stitcher) CAMCO Autosticher Model 203, Year 1994 . -Six stations with 2 stitching heads ( can add other two ) , belt delivery for exercise books magazines, brochures, etc. up to size 29x38 cms. . - Max trimming thickness of 9,5 mms. . - Hourly rate up to 4000 copies per hour . - Many spare knives for trimmer, all accessories
1994
4,500 €  
  IT   request
110785828 301

ARBURG Allrounder 221-175-350 for sale
Plastic injection machines


To sell old stock from: Serial number: 127651 Weight: 1060 kg Clamp force: 350 kN Heating: 5.56 mm kW 8sshqg8be Pump motor: 11 kW Total load: 16,6 kW
used machine
 
To sell old stock from:. . Serial number: 127651. Weight: 1060 kg. Clamp force: 350 kN. Heating: 5.56 mm kW. 8sshqg8be. Pump motor: 11 kW. Total load: 16,6 kW
1984
999 €  
  DE   request
110785810 703

BAADER 51 for sale
Fish processing machines


Man. year: 1990 Condition: overhauled The Baader 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, righ ...
used machine
 
Man. year: 1990. Condition: overhauled. . The Baader 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish.. This machine seizes the skin without initial cut from the tail end, right where the skin begins. This results in a higher yield.. Usable width of feed belt: 380 mm The fillets can be placed on the belt optionally side by side.. Capacity: 50-160 filletmin (depends on the fillet size and operator's skill). Power consumprion: 1,5 kW. Water consumption: 15 Lmin. Dimensions: 1980 x 780 x 1130 mm. Weight (net): 530 kg
 
Price  
  NO   request
110785701 201

SCM M2 for sale
Multi-blade saws


-Machine in stock -After reviewing the technical -A well known reputable brand SCM TECHNICAL PARAMETERS: -Crawler width 220 mm -Shaft Width 210 mm -Shaft diameter 70 mm -Central lubrication track -Max diame ...

 
-Machine in stock. -After reviewing the technical. -A well known reputable brand SCM. . TECHNICAL PARAMETERS:. . -Crawler width 220 mm. -Shaft Width 210 mm. -Shaft diameter 70 mm. -Central lubrication track. . -Max diameter of the saw 350 mm. -cutting height 120 mm. -Width of the table top with clearance 114cm. -The length of the countertop 164 cm. -Adjustable feed speed. -Main engine 30 kW. . -Diameter exhaust-150 mm. -Caterpillar in very good condition. -Two rows of latches. -4 pressure rollers. . Machine size:. – length 170 cm. width 150 cm. -height 135 cm. -the weight of the 1420 kg
 
Price  
  PL   request
110785643 107

H.M. SBS 3100/3 for sale
Guillotine Shears


cutting length max.: 3.100mm plate thickness max.: 3mm control unit: SIEMENS ELGO 9521 cutting angle max.: 1,5° way back gauge: 1.000mm number of strokes max.: 34 1min number of downholders: 13 required power: 7 ...
used machine
 
cutting length max.: 3.100mm. plate thickness max.: 3mm. control unit: SIEMENS ELGO 9521. cutting angle max.: 1,5°. way back gauge: 1.000mm. number of strokes max.: 34 1min. number of downholders: 13. required power: 7,5kW. . equipment:. - back gauge with SIEMENS ELGO 9521 positioning control and piece counter. - safety lights for back room. - plate support. - cutting lightening. - table with roller balls. - front ejector for small pieces. - tapping , single and endless stroke. - right angle stop. - two lay-on arms. - foot switch
2012
Price  
  DE   request
110613102 503  

MERCODOR ZM 1 for sale
Shredders


the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw

 
the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw
 
Price  
  DE   request
110613100 503  

SCHOMBERG ES 60/85 for sale


This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.

 
This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.
 
Price  
  DE   request
110613098 503  

SCHOMBERG ES35/60 for sale
Rotor shears


the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel
used machine
 
the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel
2012
Price  
  DE   request
110613086 401

SIG SIMONAZZI can sizes 250, 237 and 330 ml for sale
Can Filling Line SIG Simonazzi for CSD - 36000 cph


Can Filling Line SIG Simonazzi for CSD – 36 000 cph This line was rebuilt in year 2007 for filling carbonated soft drinks in small aluminum cans – rebuilding was made by SIDEL SIG Simonazzi and plenty of new mac ...

 
Can Filling Line SIG Simonazzi for CSD – 36 000 cph. . This line was rebuilt in year 2007 for filling carbonated soft drinks in small aluminum cans – rebuilding was made by SIDEL SIG Simonazzi and plenty of new machinery, including 250 ml can filler, was changed to new. Line operation was stopped in 2010 and equipment is in very good condition . . . Line characteristics . • The line nominal capacity is 36 000 cph. • Cans type for sizes 237 ml and 330 ml is 202 Sleek and for 250 ml it is 200 Slim . • Line was rebuilt in 2007 with most machines new from SIDEL SIG Simonazzi, including new filler and seamer for 250 ml slim cans with body diameter of 53.3 mm and can height 134 mm. . • Line is still installed but not powered any more . • All PLC program backups exist and documentation is in English . . List of main equipment . . • Depalletizer Simonazzi Sweep-off IBA117, capacity 36 000 cph, mfg year 1994 . • Rope Conveyer Sasib Beverage, year 1994, capacity 50 000 cph, mfg year 1994. • Mixer Sarcmi DPRF, F7516, year 1994, capacity 150 hlh. • Rinser for 250 ml Slim cans made by Simonazzi in year 2006. • Filler SIDEL SIG Simonazzi Starcans 2000, type 54P, 102.8 for 250 ml SLIM cans, can type 200 Slim, capacity 36 000 cph, mfg year 2007. . • Fume evacuation fan system for Starcans 2000 can. • Can seamer Ferrum F706G, for 250 ml slim cans with six seaming heads for lid type 200, manufacturing year 2007. • Rinser for 330ml and 237ml cans made by SARCMI, manufacturing year 1994. • Filler SARCMI New Canfill N50 – 6 RN for 237ml and 330 ml Sleek cans, can type 202, capacity 36 000 cph, manufactured in year 1994.. • Can seamer Comaco AMG6 RN for 237ml and 330 ml sleek cans type 202, manuf. year 1994. . • Filling inspector Stratec CL-X 4708, X-Ray, manufacturing year 2006. • Belt Conveyer Sasib Beverage TSA03, year 1997. • Twister Ribaltino Nimax , one for every size 0.25, 0.33, 0.237, year 2007. • Can blower-dryer SIG Simonazzi XL46000733, manufacturing year 2007. • Can filling inspector Bull Stratec Compact line, year of manufacturing 2007 . • Printer Videojet Excel 1701 UHS, year 2006. • Tunnel Heater Sasib Simonazzi CW 2540, PAC017, manufacturing year 1994. Compact one level hot water can heater with conventional relay control.. • Heuft Spectum can filling inspector without x-ray sensor. • Can blower-dryer SIG Simonazzi XL46000733, manufacturing year 2007. • Tray Shrink Packer SMI SK600T (Trays-24 cans; for 0,25 – 12 cans), with two roll film feeding and automatic change over, manufacturing year 2002. • Printer VideoJet XL 170i UHS . • Printer Willit 3150 Si, year 2006. • Palletizer Simonazzi Kombi, IBP0713, manufacturing year 2007, Control PLC is Siemens Simatic S7. . • Pallet wrapper Robopac HELIX HS30, manufacturing year 2007. . • Manual pallet wrapper . . Depalletizer Simonazzi Depal Sweep-off IBA117. Belt Conveyer Sasib Beverage TSA031. Rinser 0.25 Simonazzi. Rinser 0.33, 0.237 SARCMI. Filler for 0,237 & 0,33 L, SIG Simonazzi New Canfill 50 -AGM6Rn (CAN 202). Filler for 0,25 L, SIG Simonazzi Starcans 2000, RSC0074 (Can 200 SLIM). Can seamer Lid 200 Ferrum F706G. Can seamer Lid 202 Ferrum. Rejector Stratec CL-X 4708. Can dryer XL46000733 SIG Simonazzi. Printer Videojet Excel 1701 UHS. Mixer, Sarcmi DPRF, F7516. Packer SMI SK600T (Trays-24 cans; for 0,25 – 12 cans). Rope Conveyer Sasib Beverage. Twister Ribaltino Nimax 0.25, 0.33, 0.237. Tunnel Heater Simonazzi CW 2540, PAC017. Printer Willit 3150 Si. Palletizer Simonazzi Kombi, IBP0713. Pallet wrapper Robopac HELIX HS30.
 
Price  
  FI   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter